Nice. Needs more pics.
I have a BMW 140 amp alternator as well and a Mercedes ignition driver.
Search found 1633 matches
- Thu Sep 08, 2016 7:58 pm
- Forum: Range Rover / Land Rover
- Topic: Disco with electric winch
- Replies: 21
- Views: 9412
- Sat Sep 03, 2016 6:54 am
- Forum: Range Rover / Land Rover
- Topic: Disco with electric winch
- Replies: 21
- Views: 9412
Re: Disco with electric winch
Crawlerer79 wrote:Mattman wrote:Howat engineering made my beads. He will do land rims.
Righty.... only problem is he's in the NI. Did you need to cert it or is it just a trailer queen
Plan is to cert it. Shipping rims isn't hugely expensive. Each rim cost $170 to convert to a certable beadlocks.
- Fri Sep 02, 2016 6:23 pm
- Forum: Range Rover / Land Rover
- Topic: Disco with electric winch
- Replies: 21
- Views: 9412
Re: Disco with electric winch
Will do a build thread shortly, in the next few weeks hope to have it mostly complete for the first part of the project. When I got it it was certed for 33 as and the lift and had a very well done guard chop. Land cruiser 80 series diffs, elocker front, auto locker rear, chromolly axles and cvs, 5i...
- Fri Sep 02, 2016 8:18 am
- Forum: Range Rover / Land Rover
- Topic: Disco with electric winch
- Replies: 21
- Views: 9412
Re: Disco with electric winch
Will do a build thread shortly, in the next few weeks hope to have it mostly complete for the first part of the project. When I got it it was certed for 33 as and the lift and had a very well done guard chop. Land cruiser 80 series diffs, elocker front, auto locker rear, chromolly axles and cvs, 5in...
- Fri Sep 02, 2016 6:15 am
- Forum: Range Rover / Land Rover
- Topic: Disco with electric winch
- Replies: 21
- Views: 9412
Re: Disco with electric winch
I have just done a dual battery conversion in my D1. Relocated the power steer res and a few other bits and bobs and now have two batteries in stockish locations.
Have a pair of 650CCA's and have an upgraded 150amp alternator.
Matt.
Have a pair of 650CCA's and have an upgraded 150amp alternator.
Matt.
- Sun May 29, 2016 9:00 pm
- Forum: Projects / Mod's
- Topic: first surf build.
- Replies: 458
- Views: 110270
Re: first surf build.
Very cool.
- Thu May 19, 2016 9:34 pm
- Forum: Range Rover / Land Rover
- Topic: disco 1 abs light on, grrrr
- Replies: 6
- Views: 4506
Re: disco 1 abs light on, grrrr
Interested to hear, my light is on as well!
- Mon Apr 11, 2016 9:53 pm
- Forum: Projects / Mod's
- Topic: first surf build.
- Replies: 458
- Views: 110270
Re: first surf build.
Gutted. Where's the limiter vids???
- Mon Apr 11, 2016 9:34 pm
- Forum: Tool Shed
- Topic: Gopro or similar
- Replies: 19
- Views: 4425
Re: Gopro or similar
I have an sj4000 and for the money its good. Uses stock gopro mounts.
- Thu Apr 07, 2016 8:51 pm
- Forum: Range Rover / Land Rover
- Topic: 110 Single cab flat deck 4bd1t swap
- Replies: 16
- Views: 7378
Re: 110 Single cab flat deck
I am after front diff arms and brackets.
Cheers
Cheers
- Mon Apr 04, 2016 8:43 pm
- Forum: Tool Shed
- Topic: Demo derby advice?
- Replies: 10
- Views: 2732
Re: Demo derby advice?
Brace your door area as much as possible!
- Wed Mar 30, 2016 5:17 pm
- Forum: Events
- Topic: 2016 NZ1 Winch Challenge
- Replies: 2
- Views: 4521
Re: 2016 NZ1 Winch Challenge
Awesome
- Fri Mar 18, 2016 9:35 pm
- Forum: 4WD Parts
- Topic: Runva winches still the go?
- Replies: 8
- Views: 2298
Re: Runva winches still the go?
I have a runva and it goes well. Was a hassle to buy. Not a fan of winch.co.nz
- Wed Mar 09, 2016 8:55 pm
- Forum: Projects / Mod's
- Topic: FJ40 roll cage, power steering, and disc brake front end
- Replies: 277
- Views: 64517
Re: FJ40 roll cage, power steering, and disc brake front end
Awesome work. That's a high level of finish!
- Sun Mar 06, 2016 5:05 pm
- Forum: Jeep
- Topic: Failed WOF
- Replies: 5
- Views: 4248
Re: Failed WOF
I have done a few vehicles that required a press without using a press.
Cut the base of the joint with an angle grinder and hammer the pin and ball thru. Then use an angle grinder to cut a wedge out of the joint outer.
Cut the base of the joint with an angle grinder and hammer the pin and ball thru. Then use an angle grinder to cut a wedge out of the joint outer.
- Wed Feb 24, 2016 7:19 pm
- Forum: Projects / Mod's
- Topic: new 1uz gen1 project
- Replies: 23
- Views: 9148
Re: new 1uz gen1 project
Nice truck.
I have a 4.8hi pinion front and standard rear if you are keen
I have a 4.8hi pinion front and standard rear if you are keen
- Tue Feb 23, 2016 4:59 am
- Forum: Events
- Topic: centeral zone club truck challenge
- Replies: 2
- Views: 4259
- Sun Feb 21, 2016 4:07 am
- Forum: Projects / Mod's
- Topic: first surf build.
- Replies: 458
- Views: 110270
Re: first surf build.
Nothing unfixable in that list.
What's the problem with the windscreen?
What's the problem with the windscreen?
- Sun Feb 21, 2016 4:04 am
- Forum: Isuzu
- Topic: w/shop manual for a 97 bighorn SE?
- Replies: 1
- Views: 2846
Re: w/shop manual for a 97 bighorn SE?
Go to clubisuzu.com and you will find the download link.
The trans is the same unit used in Pajeros and Toyotas, its an Asin
The trans is the same unit used in Pajeros and Toyotas, its an Asin
- Tue Feb 09, 2016 6:04 pm
- Forum: This weekends achievements
- Topic: 6-th 8th Feb
- Replies: 13
- Views: 10713
Re: 6-th 8th Feb
Wow the FJ is rusty!
- Tue Feb 09, 2016 5:54 pm
- Forum: Drivetrain / Suspension
- Topic: Auto-Lockers (Yes / No)
- Replies: 50
- Views: 10959
Re: Auto-Lockers (Yes / No)
I ran twin auto lockers in my manual truck with silver stones. Awesome traction upgrade and very low cost and pretty easy to install. Was horrid on the street but amazing off road. Driving style does have to change a bit tho and you notice it in tight stuff but the traction upgrade is worth it. My n...
- Wed Feb 03, 2016 7:14 pm
- Forum: Projects / Mod's
- Topic: first surf build.
- Replies: 458
- Views: 110270
Re: first surf build.
Looking awesome man. Good luck for the coming cert!
Love reading your posts.
Love reading your posts.
- Fri Jan 29, 2016 6:31 pm
- Forum: Nissan
- Topic: Terrano Gearbox swap
- Replies: 9
- Views: 3545
Re: Terrano Gearbox swap
I have a complete manual conversion for an R50. Everything included plus box has been rebuilt.
- Wed Jan 27, 2016 6:30 pm
- Forum: Tool Shed
- Topic: Expected life of EGT Sensor
- Replies: 9
- Views: 2461
Re: Expected life of EGT Sensor
I just took out my autogauge brand egt gauge and probe which was Pre turbo. Had been in for 4 years. No noticeable issues
- Thu Jan 21, 2016 8:46 pm
- Forum: Mitsubishi
- Topic: 4M40 96 Challenger Burning out glow plugs!
- Replies: 10
- Views: 5891
Re: 4M40 96 Challenger Burning out glow plugs!
The oil causing the issues would be very unusual. Faulty injectors and burnt glowplugs and faulty sensors are very common issues.
- Sat Jan 16, 2016 8:20 pm
- Forum: Toyota
- Topic: R150 v R151f
- Replies: 7
- Views: 3461
Re: R150 v R151f
The V6 ratios on the R150 won't suit the diesel and the shifter location is different which will cause tunnel issues.
- Sun Jan 10, 2016 6:24 pm
- Forum: Projects / Mod's
- Topic: first surf build.
- Replies: 458
- Views: 110270
Re: first surf build.
Nice. Thanks for the info.
- Sun Jan 10, 2016 4:35 pm
- Forum: Projects / Mod's
- Topic: first surf build.
- Replies: 458
- Views: 110270
Re: first surf build.
Getting close!
What did you use for front springs? Did you make your own spring towers?
What did you use for front springs? Did you make your own spring towers?
- Wed Jan 06, 2016 8:12 pm
- Forum: Nissan
- Topic: D21 Terrano draining battery
- Replies: 5
- Views: 1724
Re: D21 Terrano draining battery
Do you have a meter? If so put it in amps mode and undo the positive cable and put the meter inline between the cable and battery.
Remove each fuse one at a time noting the current on the meter. When it drops away you have found the circuit.
Remove each fuse one at a time noting the current on the meter. When it drops away you have found the circuit.
- Tue Jan 05, 2016 8:00 pm
- Forum: Projects / Mod's
- Topic: first surf build.
- Replies: 458
- Views: 110270
Re: first surf build.
Will you ever need to take it off again?