Search found 1093 matches

by callum007
Wed Jun 13, 2018 11:10 pm
Forum: Tool Shed
Topic: Replacement Driveshaft Bolts
Replies: 6
Views: 475

Re: Replacement Driveshaft Bolts

Cap screws and nordlock washers for the win
by callum007
Wed Jun 13, 2018 11:08 pm
Forum: Events
Topic: a warning to southland and otago club members
Replies: 7
Views: 1246

Re: a warning to southland and otago club members

Being that i know the vehicle, even without the photos... I dont doubt it. But in his defence... Ive seen this vehicle on its roof or side many times, so It must be good as gold! mind you, you may likely draw a similar conclusion to my vehicle.. the cage is one of the only bits ive never played with...
by callum007
Sun Sep 10, 2017 7:16 pm
Forum: Projects / Mod's
Topic: X5 Project.
Replies: 95
Views: 5591

Re: X5 Project.

Hey. The alloy cover is a good look... not being critical, as I cant see the detail but just check everything is still ok after you first you that in anger.. its a large winch and the framework looks a little light.. especially with the mounting in shear. Have a gander at Toms Offroads gallery to ga...
by callum007
Mon Sep 04, 2017 6:18 pm
Forum: Events
Topic: sheffield on again
Replies: 34
Views: 3634

Re: sheffield on again

i should ring Nev, but anyone know if spots left?
by callum007
Mon Nov 07, 2016 6:49 pm
Forum: Tool Shed
Topic: Looking at cheap/chinese welders?
Replies: 3
Views: 611

Re: Looking at cheap/chinese welders?

Looks fine but I'm no expert. the spool gun would cost you half of that.. I recall mine was 300 plus the mini reg etc.
by callum007
Sat Oct 15, 2016 5:31 am
Forum: Projects / Mod's
Topic: An Un-named Outlaw...
Replies: 48
Views: 5642

Re: An Un-named Outlaw...

I suppose but it's all relative.. a 200a 12v and a 50amp 48v although use the same (approx) as they make the same amount of energy. I know you'll understand all that but for reference the 48v 100amp unit ran the Kubota 13hp at ~75% when max output. Out of interest what is ur trailer axle? I'm on the...
by callum007
Fri Oct 14, 2016 5:41 pm
Forum: Projects / Mod's
Topic: An Un-named Outlaw...
Replies: 48
Views: 5642

Re: An Un-named Outlaw...

I didn't check how old the comment was re 48vdc.. why not a 48v alternator? I had to use one to make a -48vdc (yes minus 48v) generator...
Used in marine/mining industry
by callum007
Sat Sep 10, 2016 8:48 am
Forum: 4WD Parts
Topic: MCC bars, who sells them
Replies: 7
Views: 597

Re: MCC bars, who sells them

I got mine from winch.co.nz, He was great to be fair except his trade me listings were sometimes cheaper than he would tell you on email/phone... so I bought from his trade me.
Went Trundles for an XROX this time... Love it
by callum007
Wed Jul 20, 2016 5:12 pm
Forum: Tool Shed
Topic: Disposable Welding Gas Bottles - CHCH
Replies: 18
Views: 1661

Re: Disposable Welding Gas Bottles - CHCH

I spent $80 getting an old fire extinguisher tested and valved at the local cylinder tester. now its $35 per fill. I only do 2 to 3 fills a year.
by callum007
Thu Apr 28, 2016 7:50 pm
Forum: Projects / Mod's
Topic: V8 Land Rover project
Replies: 632
Views: 60344

Re: V8 Land Rover project

On a side note.. If ya happen to be a builder you end up with lots of flashing tape, comes in 200mm wide rolls and is much cheaper even when you double it up for thickness. Poor mans dynamat
by callum007
Tue Apr 26, 2016 12:07 am
Forum: Planning a trip?
Topic: Maratoto wires loop. Sunday 3rd april
Replies: 16
Views: 1343

Re: Maratoto wires loop. Sunday 3rd april

off topic a bit, but they look like trailer brake solenoids that you fit as an electric reverse lever thing.. about $80 from bnt from memory, I run one in the buggy as my handbrake. Might save the US freight
by callum007
Sat Jan 30, 2016 7:45 am
Forum: Tool Shed
Topic: Plasma cutters??
Replies: 19
Views: 1144

Re: Plasma cutters??

If you have talent you can do anything. I don't have talent I have CAD and laser cut bracketry wins every time. All I was getting at was that for many, there is no real need for a plasma cutter to cut a few dozen things that can get as easily be done with other cheaper devices. You still need to cle...
by callum007
Fri Jan 29, 2016 8:14 pm
Forum: Tool Shed
Topic: Plasma cutters??
Replies: 19
Views: 1144

Re: Plasma cutters??

16mm N/S should cost u about $6-7 per M Reece. 16 is sufficient for a shed supply but is very difficult to get into a plug socket!! 6mm range cable is good to feed your outlets with. Sorry back on topic. Ive always wanted a plasma cutter but my c/less circular saw cuts 12mm plate fine and you get a ...
by callum007
Sun Jan 17, 2016 11:15 am
Forum: Stolen / Lost and Found
Topic: "Stolen" 38" Super Swampers & BFG Muds
Replies: 7
Views: 1662

Re: "Stolen" 38" Super Swampers & BFG Muds

Bump.

Rewards still offered for any info.. Surely the swampers will show up one day.
by callum007
Thu Jan 14, 2016 8:15 pm
Forum: Drivetrain / Suspension
Topic: Best all-round shock for 2" lifted terrano
Replies: 12
Views: 1031

Re: Best all-round shock for 2" lifted terrano

Armada Extremes with remote reservoirs from Trundles Automotive. give you about 10 hp at the wheels extra
by callum007
Mon Jan 04, 2016 3:38 pm
Forum: Projects / Mod's
Topic: Lobstrosity
Replies: 82
Views: 5381

Re: Lobstrosity

I think mine looks worse than that been fine for years but not sure if that run nice at high speeds often
by callum007
Mon Jan 04, 2016 3:28 pm
Forum: Diesel Engines and Modifications
Topic: 3 Inch exhaust on 13BT
Replies: 8
Views: 694

Re: 3 Inch exhaust on 13BT

No idea. Thought it only had to exit behind rear most door or seat or something
by callum007
Sun Jan 03, 2016 11:33 am
Forum: Diesel Engines and Modifications
Topic: 3 Inch exhaust on 13BT
Replies: 8
Views: 694

Re: 3 Inch exhaust on 13BT

I ran 3" from turbo back
by callum007
Thu Dec 10, 2015 7:16 am
Forum: Toyota
Topic: bj70 soa swap
Replies: 19
Views: 1142

Re: bj70 soa swap

I did many moons ago... Like that other intelligent fella said. YOU FALL OVER.

But if your clever about it, it might be ok..
by callum007
Tue Dec 08, 2015 7:56 pm
Forum: Stolen / Lost and Found
Topic: "Stolen" 38" Super Swampers & BFG Muds
Replies: 7
Views: 1662

Re: "Stolen" 38" Super Swampers & BFG Muds

Bump.. Insurance being ass hats so I'd really like these back.. Reward offered for any info
by callum007
Mon Nov 30, 2015 7:52 pm
Forum: Stolen / Lost and Found
Topic: "Stolen" 38" Super Swampers & BFG Muds
Replies: 7
Views: 1662

Re: "Stolen" 38" Super Swampers & BFG Muds

Mostly likely Matt. Apparently a vehicle was spending more than usual outside my place yesterday but no rego was taken..
by callum007
Mon Nov 30, 2015 9:05 am
Forum: Stolen / Lost and Found
Topic: "Stolen" 38" Super Swampers & BFG Muds
Replies: 7
Views: 1662

Re: "Stolen" 38" Super Swampers & BFG Muds

the swampers were off the bug but in a pile up the side of my house, behind a gate, under a security light, beside the dog kennel...

Should be all over FB by now. at 50kg each for the swampers and over a meter tall, there must have been a few of them and a trailer to fit all 8!
by callum007
Mon Nov 30, 2015 7:13 am
Forum: Stolen / Lost and Found
Topic: "Stolen" 38" Super Swampers & BFG Muds
Replies: 7
Views: 1662

"Stolen" 38" Super Swampers & BFG Muds

"STOLEN" in Dunedin from my driveway!!! 4x 38x13.5x16 Super Swampers on beaten up White spoke rims 4x 265x75x16 BFG Mud KM2 on New Alloys.. Please contact me if you hear anything or NZ Police Thanks, Callum 021383372 BFG's http://i325.photobucket.com/albums/k379/moobz007/20150718_202609_zp...
by callum007
Thu Nov 12, 2015 9:26 pm
Forum: Drivetrain / Suspension
Topic: can i do this with my hilux SAS?
Replies: 22
Views: 1190

Re: can i do this with my hilux SAS?

mudbug wrote:ok cool. would coilovers blow my budget completely and mean that I don't get to finish my project??


You are correct.
by callum007
Sat Nov 07, 2015 5:42 am
Forum: Projects / Mod's
Topic: bj40 build...
Replies: 946
Views: 76044

Re: bj40 build...

rokhound wrote:Was good to see you up here anyway dude. You should aim to try and get back when Mr McCready brings his beast over.

Give us warning... I'm sure you'll need 36 months notice if your planning on attending.
by callum007
Mon Nov 02, 2015 7:06 pm
Forum: Projects / Mod's
Topic: bj40 build...
Replies: 946
Views: 76044

Re: bj40 build...

Yup.. guns holstered. Was dry. Wasnt tight (by buggy standards) or steep. Rear fiddles would have been handy for a nibby sized truck
by callum007
Mon Nov 02, 2015 11:21 am
Forum: Projects / Mod's
Topic: bj40 build...
Replies: 946
Views: 76044

Re: bj40 build...

Off topic... but as you saw Rok, I dodnt need the big tyres to have fun. I gather you all run them as compensation?
by callum007
Mon Nov 02, 2015 5:21 am
Forum: Events
Topic: sheffield mudplug
Replies: 14
Views: 1217

Re: sheffield mudplug

Yup. Blue rear steer v8 sounding thing.. was it your mrs vehicle that had a starter fault?
by callum007
Fri Oct 30, 2015 8:11 pm
Forum: Events
Topic: sheffield mudplug
Replies: 14
Views: 1217

Re: sheffield mudplug

I win if the bitch drives onto the trailer..... edit. 1 peg and 3.7 seconds shy of a win..

Great day out though thanks organiser people.
by callum007
Fri Oct 30, 2015 8:10 pm
Forum: Projects / Mod's
Topic: bj40 build...
Replies: 946
Views: 76044

Re: bj40 build...

I'm glad I'm neither buggy or crawler. Only there to convert fuel into noise

Go to advanced search