Search found 165 matches

by Henry
Thu Dec 13, 2018 7:56 pm
Forum: Toyota
Topic: 1KZ torque Lock up Wiring.
Replies: 8
Views: 5623

Re: 1KZ torque Lock up Wiring.

Well I thought it was time for a update. I have fitted the Torque Lock up. it works as advertised. I use it when the Torque Converter will not stay locked up. this may take 30 mins to 2 hours to show up. I had show weekend away in and around Omarama and St Bathans with the 4x4 club . I did 800 km ap...
by Henry
Fri Oct 26, 2018 6:35 am
Forum: Suzuki
Topic: 98 Grand vitara v6
Replies: 4
Views: 3453

Re: 98 Grand vitara v6

HI I have Vitara v6. Yes they like petrol. The figures out on the Internet are about right. Nice to drive. Check that you can't hear the cam chains. That will cost $2500 from the dealer. I did it myself for $1000 of parts.

Henry
by Henry
Sun Jul 15, 2018 6:55 pm
Forum: Toyota
Topic: 1KZ torque Lock up Wiring.
Replies: 8
Views: 5623

Re: 1KZ torque Lock up Wiring.

I do understand what you are saying. I had the ECU at Anything about 4 years ago for cap replacemet etc. The problem is the fault is very intermittent. It may also be as designed. Meaning it maybe turned off for anyone of the 5 or 6 things that turn it off. I have also got the lock up so will instal...
by Henry
Sun Jul 15, 2018 11:24 am
Forum: Toyota
Topic: 1KZ torque Lock up Wiring.
Replies: 8
Views: 5623

Re: 1KZ torque Lock up Wiring.

Thanks for that Calvin
by Henry
Sun Jul 15, 2018 10:30 am
Forum: Toyota
Topic: 1KZ torque Lock up Wiring.
Replies: 8
Views: 5623

Re: 1KZ torque Lock up Wiring.

Kzj78 1994 .
by Henry
Sun Jul 15, 2018 9:11 am
Forum: Toyota
Topic: 1KZ torque Lock up Wiring.
Replies: 8
Views: 5623

1KZ torque Lock up Wiring.

So my Lockup does not always stay locked up at 100 km on the open road. I have purchased a Torque Converter lockup kit from Wholesale Auto in Australia. I have a wiring diagram but the detail is in Japanese...... I need to find the Torque Converter Clutch lockup signal as it comes out of the ECU. I ...
by Henry
Mon Apr 30, 2018 8:49 am
Forum: Toyota
Topic: Kzj78 fuel capacity.
Replies: 5
Views: 3044

Re: Kzj78 fuel capacity.

Interesting. I had the fuel light on and did about 30 km. I put 73 litres in to fill up......
Something does not add up here ....
by Henry
Sat Apr 28, 2018 7:26 pm
Forum: Toyota
Topic: Kzj78 fuel capacity.
Replies: 5
Views: 3044

Kzj78 fuel capacity.

As per the topic. Can some one tell me the fuel capacity of a Kzj78?

Thanks Henry
by Henry
Thu Feb 15, 2018 8:42 am
Forum: Toyota
Topic: Auto trans oil temp
Replies: 6
Views: 3520

Re: Auto trans oil temp

HI Towing with that transmission requires you to use it as a manual or it will overheat. The torque converter will not stay locked up and that is where the issue is. I have a temp Guage fitted to mine and tow a caravan over the Arthurs pass with no issues. I do control which gear it is in and will c...
by Henry
Fri Nov 27, 2015 12:31 pm
Forum: Toyota
Topic: KZJ78 Auto won't Lock up in 4th
Replies: 3
Views: 1145

Re: KZJ78 Auto won't Lock up in 4th

Hi Gardengnome

In your case the High Engine Temp will have caused the ECU to not lock the torque Converter.

I am still chasing my issue....
by Henry
Mon Nov 23, 2015 4:19 pm
Forum: Toyota
Topic: KZJ78 Auto won't Lock up in 4th
Replies: 3
Views: 1145

KZJ78 Auto won't Lock up in 4th

Hi My Auto will occasionally not stay locked up in 4th. It happens on the open road and if I turn the o/Drive off/on a couple of Times it will lock up again. The Auto is warm but not over hot. It was rebuilt 2 years ago after water was in it. The fluid level is good and not burnt or dirty... I had t...
by Henry
Sun Sep 27, 2015 4:43 pm
Forum: Drivetrain / Suspension
Topic: ARB Switches Hot
Replies: 4
Views: 1474

ARB Switches Hot

Hi I have fitted a couple of the ARB switches. And they are getting HOT when switched on. It is a the bulb in the switch. I have done a search here and can not find anything. I have also done a search else where and find it is a common issue. What I would like to know is what have people here done a...
by Henry
Sat Feb 07, 2015 5:33 pm
Forum: Diesel Engines and Modifications
Topic: Thoughts on open c/case ventilation?
Replies: 3
Views: 1266

Re: Thoughts on open c/case ventilation?

Hi Had a Landcruiser BJ73 with a 3B engine. It dumps the crankcase with a breather at the bottom of the engine via a steel tube. I am in Canterbury in a 4X4 club and occasionally do some big braided rivers with water over the bonnet. It never bothered the 3B. Did worry you at times with the fumes at...
by Henry
Wed Sep 17, 2014 6:57 pm
Forum: Tool Shed
Topic: Spare Wheel carrier Piviot
Replies: 2
Views: 534

Spare Wheel carrier Piviot

Hi Looking at building a spare wheel carrier for my Prado. It has a steel bumper I can weld bits to but I am struggling to get the bits for the piviot. I have looked at Trailer Stub axle etc but that is cast so I won't be able to weld to it,,,, Also I need a latch. Does anyone know where I ca get th...
by Henry
Fri Jul 04, 2014 7:18 pm
Forum: 4WD Parts
Topic: WTB: lj/kzj78 left tie rod end
Replies: 15
Views: 2054

Re: WTB: lj/kzj78 left tie rod end

Hi

If you take your registration number to toyota they will find the part number.

mine was 4546069117

For a KZJ78 1993 ish prado.

Henry
by Henry
Tue Jul 01, 2014 4:51 pm
Forum: 4WD Parts
Topic: WTB: lj/kzj78 left tie rod end
Replies: 15
Views: 2054

Re: WTB: lj/kzj78 left tie rod end

HI

I got Complete tie rod assy for $50 from Toyota.......
by Henry
Thu Jun 19, 2014 11:34 am
Forum: Toyota
Topic: Tie Rod Connecting Rod Shortening in Christchurch
Replies: 1
Views: 475

Re: Tie Rod Connecting Rod Shortening in Christchurch

HRN engineering in Sydneham....
by Henry
Wed Jun 18, 2014 8:08 pm
Forum: Toyota
Topic: Tie Rod Connecting Rod Shortening in Christchurch
Replies: 1
Views: 475

Tie Rod Connecting Rod Shortening in Christchurch

Hi


I have a tie rod connecting shaft I want shortened by 100 or so and re threaded Etc.

Can any one tell me where to go for this in Christchurch?

Thanks Henry
by Henry
Sun Apr 13, 2014 6:41 pm
Forum: Toyota
Topic: Hand brake shoes for Prado
Replies: 3
Views: 526

Re: Hand brake shoes for Prado

I got some from Safer Brakes in Fitzgerald ave in CHCH if you are down....
by Henry
Sun Apr 13, 2014 6:40 pm
Forum: Trip Reports, Trail Reviews, Reports and Information
Topic: No name road
Replies: 4
Views: 1361

Re: No name road

Hi

Went through Cockeye creek from the north and all good. Lots of low bushes and gorse etc.
Then turned west and met noname road and turned left in the good bit.
That was easy as...
The Rivers were very low.
Just watch as things may change with the weather that is forecast for this week.
by Henry
Tue Apr 08, 2014 2:08 pm
Forum: Trip Reports, Trail Reviews, Reports and Information
Topic: No name road
Replies: 4
Views: 1361

Re: No name road

Hi

Going for a look this weekend.

Will update you next week...
by Henry
Mon Apr 07, 2014 8:01 am
Forum: Tool Shed
Topic: Mufler Bearings
Replies: 8
Views: 1199

Re: Mufler Bearings

Next weekend I will check mine.
by Henry
Sun Apr 06, 2014 8:32 pm
Forum: 4WD Parts
Topic: Spare Wheel Storage Bag
Replies: 4
Views: 976

Re: Stare Wheel Storage Bag

Thanks

I will go and see him tomorrow..
by Henry
Sun Apr 06, 2014 8:02 pm
Forum: 4WD Parts
Topic: Spare Wheel Storage Bag
Replies: 4
Views: 976

Spare Wheel Storage Bag

Hi

Had a look. Does any one know where to get one in New Zealand. Or even better Christchurch?

Thanks
by Henry
Sun Mar 16, 2014 9:51 am
Forum: Toyota
Topic: 1kz-te shutting down by itself! (engine failure?) Help....
Replies: 11
Views: 4204

Re: 1kz-te shutting down by itself! (engine failure?) Help..

Hi

Can you tell me if it ok all the time when hot?

My first thought is ECU. What year is the truck?

Henry
by Henry
Wed Mar 12, 2014 10:31 am
Forum: Range Rover / Land Rover
Topic: Best place for a warrent in Christchurch
Replies: 2
Views: 739

Re: Best place for a warrent in Christchurch

City Garage.

He is in the Landrovers Owners Club.
by Henry
Mon Feb 24, 2014 7:51 pm
Forum: Toyota
Topic: Waterproofing KZJ78 Auto Transmission.
Replies: 11
Views: 1484

Re: Waterproofing KZJ78 Auto Transmission.

Hi I thought I would update on what I have done. I have connected the 4 breathers from the diffs, transfer and Auto Gearbox up to a small manifold. The output of the manifold goes to the setup in the second photo. I then can set it up with either just a breather up to the top of the snorkel. it is t...
by Henry
Thu Jan 16, 2014 11:30 am
Forum: Tool Shed
Topic: Cert rules mean 33x12.5 tyre won't pass on 15x8 wheel
Replies: 26
Views: 5183

Re: Cert rules mean 33x12.5 tyre won't pass on 15x8 wheel

Hi

I also had my cert fail on this.

In my case the tyre Manufacturer said 8 1/2 to 12 inch rims....

The certifier is just sticking to the manufacturer requirements

Henry


Henry
by Henry
Tue Jan 14, 2014 2:56 pm
Forum: Diesel Engines and Modifications
Topic: my day of prado problems 1kz
Replies: 26
Views: 6016

Re: my day of prado problems 1kz

That is not my experience.
They have always been very helpfull.
by Henry
Fri Jan 10, 2014 5:19 pm
Forum: Toyota
Topic: 1KZ Oil Leak
Replies: 3
Views: 1028

Re: 1KZ Oil Leak

Went to Toyota this morning and got a new cam belt, tensioner and pulley. Got a new seal as well. that bottom cam belt pulley comes off with just the 4 10mm bolts.
Then a trip back to toyota to get the right seal. All fixed after 3 hours or so.

Go to advanced search