Offroad-Express

muddyhilux

ive got a set that are supposed to be 3' lifted but had a coil cut out.i used them to size up front end before buying new efs.$20 and theyre yours

muddyhilux

looks gd to me.nice work mate

muddyhilux

depends on the type of driver you are.my g52 came out of a stolen and recovered and sounded like there were multiple dying cats in it and still survived 6months hard work behind the 350.i did end up upgrading to an r series in the end tho.but g52 is now in my spare truck and is still going strong :l...

muddyhilux

should have a surf ifs shaft in the shed somewhere if ya still in need. im not far from pokeno though so a bit of a drive

muddyhilux

go any led headlight conversions to suit h9 or h11 bulbs,lights on my 06 zx10r are absolute rubbish when it comes to morning ride to work on country roads

muddyhilux

when do you want to do it ? i may be able to assist oh cheers mate,well I've got 10 days booked off from easter fri through till end of anzac weekend so was hoping to make the move somewhere in there.no worries if your all booked up already as i know most are and i'm not afraid of a sloooooow drive...

muddyhilux

i know exactly what to expect speed wise,im thinking 5th gear low range with hubs out and down the back roads,v8 aint close to road worthy or bush really but it wont get fixed sitting at the brother n laws 50 odd km away,need it on my back door step type thing

muddyhilux

hey guys,been searching and searching but no luck yet,does anyone know the towing capacity when braked for the 86 hilux surf with 3ye motor?its hardly cutting the mustard and need to tow my v8 to my new place and wondering if i should try my luck

muddyhilux

thought about this as well as i had a few lying round but in the end i found it not worth the hassle.ended up machining myself a set of stub axles,front half a copy of the stub axle and then a 40mm stub to slide into axle.cost me a hundy for material and then couple of hours machining time.then used...

muddyhilux

yes u have

i had 3.5 inch body lift.25mm ball spacers and wound torsions in front.50mm lifted springs and 50mm coil spacers in the rear

AND I STILL AD RUB AT FULL ARTICULATION

muddyhilux

hi james,i do but ive just moved house and am not actually sure where they ended up.how soon do you need them?i can try dig them out this weekend txt me on 02102789016

muddyhilux

morrie9 or his business is a1 turbos located in auckland.google wont load his web page to get number right now but it shoes his site

muddyhilux

possibly have a set of aisin hubs.will try dig them out some time today $150 still about the going rate?

muddyhilux

bump.some stuff already sold.have deleted from top post

muddyhilux

Gone sorry mate but pm mudlva.hes gonna try them n his buggy.they should be just what he needs but if they didn't give him quite the lift he was after he'll be selling them off

muddyhilux

have txt ya mate.any time should be good and no worries for testing

muddyhilux

Just measured up at 480mm.they were greenish in a former life so maybe dobis and mayb progressive as top 3 coils of so are wound closer together than lower coils

muddyhilux

haha,sorry mate but no diff heads available sorry

muddyhilux

hey guys,sold house and are beginning the move out today and over the next few weeks so am slowly finding all the bits id forgotten i had so ill list here as i find them 75mm body lift blocks.think theyre uhmwpe (i didnt make them) x 6 of $50 30mm and 50mm aluminum body lift blocks,ill have to count...

muddyhilux

will grab these if still available.cheers 02102789016

muddyhilux

wont pass due to rims being more than 20% of rim width offset. ie they're 15x10 so for cert must be no more than +/-50.8.and sorry 6x 139.6, welds etc are fine and rims have been on my truck for years but should never have been and I don't spend thousands modifying my truck to cert and then get pink...

muddyhilux

4x rims 15x10-70 in powder coat black.had these rims made up a few years back at elite wheels in Christchurch. they managed to weld centres in wrong so they cut and repaired for me but then only spray can blacked them so they've rusted round the welds but apart from that they're good.only taken off ...

muddyhilux

will get back to you today as soon as i make contact with him.cheers

muddyhilux

pretty sure my brother could be very interested in canopy and roll bar too,could you let us know condition plz.cheers

muddyhilux

think i have one in auckland

muddyhilux

its hanging in that pic so usually sits higher mate,plus with bull bar on etc didn't have any probs .in saying that i'm a beach and light bush work kind of 4wd not extreme mud truck type guy.as for position of tank anywhere below rad cap should be fine.also petes right bout oil oiler,this time round...

muddyhilux

similar issues with mine in a 130 series surf.body lifted etc.running a v6 model radiator,biggest i could buy at the time and when i was running the stock 2l motor.once v8 went in added 12 or maybe 14inch davies craig fan on auto/manual switch.got alot better but still had hot times so then added 4l...

muddyhilux

papkura 4x4 repairs i think it is does old man emu

muddyhilux

http://www.precisionlasercutting.co.nz/

also a top shop

muddyhilux

Jerry wrote:yeah there are 2 different sizes listed, i got both and just returned the wrong kit

agree with jerry,I've done this a few times,as long as you don't damage packaging etc they've never had a problem

Search found 1291 matches

Re: Prado front springs

Re: ORE moving to new address

Re: G52 and a 350 Chev??

Re: WTD surf and terrrano driveshafts

Re: Combo beam light bars !!

Re: 86 surf tow capacity

Re: 86 surf tow capacity

86 surf tow capacity

Re: hilux 4x4 axle stubs for trailer?

Re: squeezing 35s under ln130

Re: Freewheeling hubs for a surf

Re: WTD - Bellhousing, small block Chev to R151f Hilux

Re: Freewheeling hubs for a surf

Re: moving house,time to sell excess parts

Re: moving house,time to sell excess parts

Re: moving house,time to sell excess parts

Re: moving house,time to sell excess parts

Re: moving house,time to sell excess parts

moving house,time to sell excess parts

Re: Front shock hoops for sale - New

Re: fs 15x10-70 rims

fs 15x10-70 rims

Re: FREE 60/61 Hilux Surf canopy, good nick, FREE

Re: FREE 60/61 Hilux Surf canopy, good nick, FREE

Re: Wanted - bellhousing for 2l-te & r150 or r151f gearbox

Re: How to keep a 350CHEV cool in a Hilux???

Re: How to keep a 350CHEV cool in a Hilux???

Re: Suspension

Re: Water jet cutting in ak

Re: kzj78 front wheel bearings