Offroad-Express

godzook

Looking at going back on Labour Weekend if we get time. Last time I went which looking at my first post was 2009, well that was a long time ago. it was pretty easy going with a few washouts to drive round. I had some mates that went back 4 odd years ago and it was pretty much the same. The track doe...

godzook

Just done mine Red/White to top pin, Black/White to bottom pin

godzook

Zukfest 2015 is all go just finished putting together the entry form. so if you would like a form or have any questions email Zukfestnz@gmail.com or check out the face book page www.facebook.com/Zukfest

godzook

As most of the tracks in the reefton area are on DOC land you need to be road legal as they are deemed as public roads

godzook

Wof and rego are need its a must these days for public liabity insurance etc

godzook

Hi. For grade 3 you need good mud tyres. Rated tow hooks/points fire extinguisher first aid kit etc

Grade 4 diff locks etc

And grade 5 winches

godzook

Hi all The Canterbury Suzuki 4WD Club is going to be running another of its Suzuki only Events over Easter weekend in Reefton on the West Coast of the South Island. This time we are only going to be running Grade 3 and up trips. More info in the next few months. If you would like to get email update...

godzook

I'm coming up from Christchurch. i heard that there hasn't been a lot of interest this year. which is a shame, but i'm still looking forward to it.

godzook

I just got some extended brake lines made when i done the EFS lift on my 413 didn't cost alot from a brake and clutch service place

godzook

At this stage i will b making my way up from Christchurch

godzook

I'm going

godzook

I had a 2001 D22 2wd Narvara 2.7 non turbo and i got 700+ ks per 75 litres it wasnt bad do drive as long as you didnt need to pass on anything on a slight up hill and when i was towing the SJ round it was down to 2nd gear and about 35 kph by the top of any hill. Now i have a 2004 D22 with the Yd25dt...

godzook

I'm guessing you are after a semi sealed lens. I have a few in Christchurch

godzook

Sweet if i could have the distance between the mounts i should be able to see if it fits or im coming to chch next weekend anyway so i could line it up to see if it works

godzook

I'm looking for a alloy nudge bar or maybe a bull bar for my 2001 non euro D22 2wd Nissan Navara. would prefer it to have spot light mounts and to be in the south island. Thanks.

godzook

Didn't end up going in the end did Serpentine on Saturday and mace town on Sunday, and back home Sunday night, that was a long enough drive in a Suzuki for one weekend

godzook

I do but its in Dunedin

godzook

thanks for that i might get a couple of mates together and head up 4 a look over labour weekend

godzook

Check on the OC website, I think they have info about it on there. may be wrong though. I'm Guessing you mean DOC website It just says A 4WD track runs for 10km along the true-right bank of Eyre Creek to Shepherd Creek Hut (6 bunks). From there it is a 2 hour walk up the Eyre Creek to Dog Box Hut, ...

godzook

Was thinking of doing Eyre creek Track on labour weekend and was wondering if any one can tell me if it was still open. i found something on the net about it and what it seemed like was the track was closed after the Shepherd Creek Hut

godzook

it does have the 4wd light switch

the rear drive shaft only has external circlips

godzook

Size wise the bearing cups are the same size as the normal 413. the flange is square with straight sides at the transfer end, the small shaft from the gear box has the same style uni and flange to the transfer. it did have a 410 gearbox till i bent the clutch selector shaft, if it does have a 410 tr...

godzook

managed to get a uni from Wilson bros to fit. after trying bnt, repco, and Suzuki only had external circlips listed

godzook

I have a 86 413 I'm replacing the uni on the front drive shaft transfer box end. and i was wondering if it is meant to have internal cerclips on 2 of the bearings and external on the other 2. if so where is the best place 2 get a new one from

godzook

I took the eletric one off and put on a factory g16a one and seems to be better so far. just got to get a fan cover made up to control the air flow better

godzook

I have just Finished Puting in the G16a into my SJ413 took it out for a play today and it gets a bit hot but more so on the open road up hills it still has the factory 1300 radiator and supercheap eletric fan (which i was told is as good as any thing else) new themostat. The next step would be to ge...

godzook

I just broke the rear diff in my bush bash safari and was wondering if there are any diferences in the ratio's between the l28 ld28 and the sd33

godzook

Godzook where abouts are you?

Dunedin

godzook

Thanks for that guys i will try some of these places during the week "Ben" off here, he sells the 1600 adaptor kits thats what i am useing and you use the 1300 flywheel and pressure plate BNT do exedy hd clutchs I tryed them and they dont have one to fit my one because i have 20 teeth on the spline ...

godzook

I'm putting a G16a in my 413 and im using the 1300 Clutch etc.I'm thinking of putting a heavy duty clutch on it because of the extra power.I'm just wondering if any one has got one on there 413 and what brand and where they got it from?

Search found 33 matches

Re: Eyre creek track Southland?

Re: Alternator Question

Re: Zukfest Easter 2015

Re: Zukfest Easter 2015

Re: Zukfest Easter 2015

Re: Zukfest Easter 2015

Zukfest Easter 2015

Re: When is the next Zuk Fest being held ??

Re: Extended brake lines

Re: When is the next Zuk Fest being held ??

Re: Zukfest 2013 - Reefton

Re: DT 2.7 turbo or non turbo whats the better engine

Re: SJ413 Left Hand Headlight

Re: Wanted - Nudge bar for Navara

Wanted - Nudge bar for Navara

Re: Eyre creek track Southland?

Re: sj413 bullbar wanted

Re: Eyre creek track Southland?

Re: Eyre creek track Southland?

Eyre creek track Southland?

Re: sj413 front drive shaft uni

Re: sj413 front drive shaft uni

Re: sj413 front drive shaft uni

sj413 front drive shaft uni

Re: Overheating g16a in 413

Overheating g16a in 413

MQ Rear diff Question

sj416 heavy duty Clutch