Search found 2822 matches

by mudlva
Sun Nov 18, 2018 4:06 pm
Forum: Projects / Mod's
Topic: Porsche Off -- A Cayenne Offroad Project
Replies: 30
Views: 951

Re: Porsche Off -- A Cayenne Offroad Project

Wire the isolater into the low amp side of the control box. The low amp side has a perminate pos that feeds the forward reverse switches. Break into that small cable ran switch. Heavy winching will melt those switches. Just remember that the switch will only shit itself under loading... and thats ex...
by mudlva
Thu Nov 15, 2018 6:01 pm
Forum: Projects / Mod's
Topic: Porsche Off -- A Cayenne Offroad Project
Replies: 30
Views: 951

Re: Porsche Off -- A Cayenne Offroad Project

Very cool 8) 8)
by mudlva
Wed Nov 14, 2018 3:37 pm
Forum: 4WD Parts
Topic: 40 SERIES LANDCRUISER TRANSFER BOX WANTED
Replies: 2
Views: 65

Re: 40 SERIES LANDCRUISER TRANSFER BOX WANTED

1 piece box or split box.
Theres a big differance.

If unsure take a couple of photos and repost
by mudlva
Sun Nov 04, 2018 10:32 am
Forum: Projects / Mod's
Topic: Rear mount radiator
Replies: 7
Views: 215

Re: Rear mount radiator

Im competeing (or should be said attempting). Will stop and chat if time allows....
by mudlva
Sat Nov 03, 2018 5:25 pm
Forum: Projects / Mod's
Topic: Rear mount radiator
Replies: 7
Views: 215

Re: Rear mount radiator

prob the best esp' now you are towing.

ran a good engine prop fan as well. leckys cant keep up with high hard usage.

in my 70 with v8 sbc the engine prop fan took 15d+ off the temps compared to twin 16" c.d. fans

see you at manukau w.c.?
by mudlva
Thu Nov 01, 2018 7:34 am
Forum: Toyota
Topic: 80 Series front swivel hub rebuild
Replies: 14
Views: 573

Re: 80 Series front swivel hub rebuild

Aha an old topic but a goodie. Don kyatts in manukau do a complete spindle kit like above. Forgot how much i paid but Jimmy in there have always done me a good deal. Plus any issues and he solves it quick fast. The cv knocking has reduced lots. They are still worn but now that the cvs are held cente...
by mudlva
Tue Oct 30, 2018 7:16 pm
Forum: 4WD's Forsale / Wanted
Topic: Anyone have any Experience with the GMC / Chevy Tahoe
Replies: 5
Views: 385

Re: Anyone have any Experience with the GMC / Chevy Tahoe

I went the sensible way, as most of the info on these I could find were from people cutting springs and lowering them to the ground with shiny bits of chrome and 28" chrome spinning rims, so I bought a landcruiser[/quote] haha god shit i got one of the cruiser FZ models. grouse motor but a tad ...
by mudlva
Tue Oct 30, 2018 7:09 pm
Forum: Projects / Mod's
Topic: Rear mount radiator
Replies: 7
Views: 215

Re: Rear mount radiator

kricky mate you are asking for lots here ah. you need to do wind tests to see what the air is doing at different speeds. i know a bloke a while back who spent ages driving at different speed with rags tied to the back on tight wire grid type pattern to see where best placement of rad would be. as yo...
by mudlva
Sun Oct 14, 2018 5:13 pm
Forum: Toyota
Topic: Fixing 80series winch stall issue
Replies: 7
Views: 265

Re: Fixing 80series winch stall issue

Ah you are a very clever man there bud. How and where did you source the spare parts from. Ive got an toyota l.m sitting on bench which just about made it to the scrap bin because of this very issue. Got a fast runva in its place but miss that pulling strenght on a single line. May go back in if i c...
by mudlva
Sun Oct 14, 2018 5:01 pm
Forum: Projects / Mod's
Topic: Porsche Off -- A Cayenne Offroad Project
Replies: 30
Views: 951

Re: Porsche Off -- A Cayenne Offroad Project

What are the legalities of rock sliders and side airbags? exactly.. at the end of the day I guess they are just super strong side steps... but getting the WOF guy to agree may be a different story. Hence I would like to know 1st. :) Sliders shouldnt affect any srs systems. They will be lower then t...
by mudlva
Sat Oct 13, 2018 4:36 pm
Forum: Projects / Mod's
Topic: Porsche Off -- A Cayenne Offroad Project
Replies: 30
Views: 951

Re: Porsche Off -- A Cayenne Offroad Project

& rock sliders agin not sure it would suit em...[/quote]


Its not whether they suit'em its more about the damage if you dont have'em.
Its the way i would be looking at sliders.
Cause you never know when that rock or tree will step out and toast ya sills if you dont protect them ah
by mudlva
Sat Oct 06, 2018 8:31 pm
Forum: Planning a trip?
Topic: QBW 2019 welly
Replies: 3
Views: 177

Re: QBW 2019 welly

Keen to start adding numbers :twisted:
by mudlva
Sat Aug 25, 2018 12:17 pm
Forum: Tyres
Topic: 36" x 15 simexs for sale 2 sets
Replies: 4
Views: 513

Re: 36" x 15 simexs for sale 2 sets

Tyres on trade me now

1743867363

And

1744243768
by mudlva
Wed Aug 22, 2018 8:32 am
Forum: Tool Shed
Topic: pto driven hydraulic winch
Replies: 10
Views: 451

Re: pto driven hydraulic winch

Yes my advice was that yes i could flow 80 tp 100ltrs at 700rpm i could not get enough pressure. As flow is drum rotation which is then directly linked to rope speed. Pressure is winch motor pulling power. More pressure equals more pull. Im flowing around 85 to 110ltrs/m and std winching sits around...
by mudlva
Tue Aug 21, 2018 8:08 am
Forum: Tool Shed
Topic: pto driven hydraulic winch
Replies: 10
Views: 451

Re: pto driven hydraulic winch

currently have Lexus auto with surf transfercase, which we all know has no pto drive... I have a plan which envoles some cutting and welding or plan b is a prado case but offset drive. plan a is to make a 70 series pto fit, so gear ratios should be similar to a factory prado set up. [color=#FF0000]...
by mudlva
Sun Aug 19, 2018 10:48 am
Forum: Tyres
Topic: 36" x 15 simexs for sale 2 sets
Replies: 4
Views: 513

Re: 36" x 15 simexs for sale 2 sets

bump.
by mudlva
Tue Aug 14, 2018 5:44 pm
Forum: Tool Shed
Topic: pto driven hydraulic winch
Replies: 10
Views: 451

Re: pto driven hydraulic winch

Just thinkin....
If youve got the mid to late 80's l.c. auto theres a good chance of running a pto.

The l.c. auto has a small brake fitted into it to stop the trans from rotating whislt engageing gears whilst transfur box is disconnected. This unit would suit any pto set up.
by mudlva
Sun Aug 12, 2018 9:31 pm
Forum: Tool Shed
Topic: pto driven hydraulic winch
Replies: 10
Views: 451

Re: pto driven hydraulic winch

1st thing you need to confirm is if your auto can take a auto? If its running a early prado then possibly yes. If not then you will need to look at driving off the crank pully. Or doing serious mods to auto rear tail output shaft into transfur box. Off hand there is a set up where a 2nd transfur box...
by mudlva
Tue Jun 26, 2018 8:07 pm
Forum: Tyres
Topic: 36" x 15 simexs for sale 2 sets
Replies: 4
Views: 513

Re: 36" x 15 simexs for sale 2 sets

DieselBoy wrote:Is that hand cut set my old set??


Na bud they are well gone.
Got those ones off a chap in tauranga
by mudlva
Sat Jun 23, 2018 9:34 am
Forum: Tyres
Topic: 36" x 15 simexs for sale 2 sets
Replies: 4
Views: 513

36" x 15 simexs for sale 2 sets

hi got 2 sets of simexs for sale 1st set 36x12.5x15 x5 tyres only near new Like less than 1000 road ks plus 1x 10' bead lock rim no cuts grazes etc $2000.00 firm 2nd set 36x12.5x15 x4 tyres only. well used and now been hand cut. would be awesome for a paddock racer or mud buggy $400.00 ono i can pal...
by mudlva
Sun Jun 10, 2018 6:33 pm
Forum: Tool Shed
Topic: Replacement Driveshaft Bolts
Replies: 6
Views: 419

Re: Replacement Driveshaft Bolts

Try don kyatts hobbile ave manukau
by mudlva
Fri Jun 01, 2018 6:43 pm
Forum: Tool Shed
Topic: where to get a winch solenoid
Replies: 4
Views: 230

Re: where to get a winch solenoid

Imho i would stay with Warren from 4x4bits.
Way easy to deal with and good products.
by mudlva
Fri Mar 02, 2018 7:01 pm
Forum: Land Access / DOC legislation / Regulations
Topic: Maratoto (often known as the “Wires Track”)
Replies: 17
Views: 2203

Re: Maratoto (often known as the “Wires Track”)

OHHH F...........
TIS ALL I CAN SAY :cry: :cry:
by mudlva
Wed Jan 31, 2018 2:38 pm
Forum: Drivetrain / Suspension
Topic: Low stall torque converters
Replies: 5
Views: 486

Re: Low stall torque converters

Sweet that sounds like the business. H.d. will be better thsn the low stall. Although that will help keep it engaged which will then help trans temps
by mudlva
Tue Jan 30, 2018 7:25 pm
Forum: Drivetrain / Suspension
Topic: Low stall torque converters
Replies: 5
Views: 486

Re: Low stall torque converters

Hi All Anyone have any real life experiences using a low stall converter in their diesel powered trucks? Looking at getting one from Aussie for my Landcruiser Prado. As the factory one is struggling with more torque from engine mods. Cheers Calvin Yep suit bigger diesels tho. Low stall units are fi...
by mudlva
Mon Jan 01, 2018 8:48 am
Forum: Diesel Engines and Modifications
Topic: mistral TD27 oil coller mod?
Replies: 9
Views: 727

Re: mistral TD27 oil coller mod?

Fyi 25% loss of cooling per core. Better to go bigger then thicker. I found the y60 or vx80 rads are only 3 core but and lot bigger than old fj40/60/70 rads and cooled v8 way better than the custom rads i had made to fit the same space as the o.e. Had to mod the front to fit etc but she dont get hot...
by mudlva
Fri Dec 29, 2017 8:16 am
Forum: Planning a trip?
Topic: Wires loop wensday 27th
Replies: 3
Views: 393

Re: Wires loop wensday 27th

hear theres a saf stuck up in there. broken down. quite a bit up above the rock garden by the sounds of it.
by mudlva
Mon Dec 11, 2017 7:25 pm
Forum: Toyota
Topic: U-bolt flip 70 series
Replies: 7
Views: 511

Re: U-bolt flip 70 series

Heres an idea why not contact lvvta and ask them?
Already said it looks tidy but im no inspector. Best to ask those thats going to cert it off
by mudlva
Mon Dec 11, 2017 7:22 pm
Forum: Toyota
Topic: 80 Series front swivel hub rebuild
Replies: 14
Views: 573

Re: 80 Series front swivel hub rebuild

Cheers dude 8)


Diorama wrote:https://www.onlineautoparts.com.au/products/Swivel-Hub-%2B-Wheel-Bearing-Repair-Kit-Swivel-Hub-Kit-Aftermarket-OEM-Replacement/ZPN-01925

Link to the kit I got. Have got parts from them before and have always been pleased with service and quality.
by mudlva
Sun Dec 10, 2017 8:34 pm
Forum: Toyota
Topic: 80 Series front swivel hub rebuild
Replies: 14
Views: 573

Re: 80 Series front swivel hub rebuild

Awesome can you post the link with part numbers.
Cheers

Go to advanced search