Ok long story short.
Have an l400 motor an trans I want to run in a saf chassis with an atlas cab for a farm truck / firewood wagon.
Auto is I believe an aisin same as what's in an 80 series.
Do the transfers swap straight over or do I need to swap the 4m40 bell onto an 80 trans?
Search found 713 matches
- Thu May 02, 2019 8:08 am
- Forum: Drivetrain / Suspension
- Topic: 4m40 auto help
- Replies: 0
- Views: 4302
- Sun Sep 02, 2018 7:27 pm
- Forum: Diesel Engines and Modifications
- Topic: inlet manifold tech
- Replies: 73
- Views: 26992
Re: inlet manifold tech
Bit of an update.
New qd32 hybrid manifold on track
#kettlemods
New qd32 hybrid manifold on track
#kettlemods
- Thu Jul 19, 2018 1:57 pm
- Forum: Diesel Engines and Modifications
- Topic: inlet manifold tech
- Replies: 73
- Views: 26992
Re: inlet manifold tech
Getting closer to some testing
- Wed Jun 13, 2018 4:30 pm
- Forum: Diesel Engines and Modifications
- Topic: Safari trials truck .
- Replies: 0
- Views: 3873
Safari trials truck .
Got all the bits to start my trials truck build. Swb gq chassis. Qd32 engine Fs5r30a spirit box (d22 an saf to make one) Lots of pipe. Need crawler transfer gears etc. Spent a day recently in sr20 powered rig. So thinking how can i bring boost in early an still have huff up top without making a 4 po...
- Sat May 05, 2018 12:02 pm
- Forum: Diesel Engines and Modifications
- Topic: inlet manifold tech
- Replies: 73
- Views: 26992
Re: inlet manifold tech
So snapped the crank on an rb style manifold better build a qd32 hybrid
- Mon Apr 30, 2018 3:56 pm
- Forum: Tool Shed
- Topic: Steel Surgeon Manukau City
- Replies: 5
- Views: 5282
Re: Steel Surgeon Manukau City
blimmin awesome this is!
Just across the swamp from me.
Dropped off some jobs for the volvo lift today.
Just across the swamp from me.
Dropped off some jobs for the volvo lift today.
- Mon Apr 30, 2018 7:21 am
- Forum: 4WD Parts
- Topic: WTB: GQ rear sway bar bits
- Replies: 1
- Views: 1046
Re: WTB: GQ rear sway bar bits
I got a no lift disconnect mechanism an cable here.
What else you after?
What else you after?
- Wed Dec 06, 2017 1:45 pm
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
Get the diffhead bang in the centre using an irs half shafts? Then a second transfer case to get drive out the side?
Or just narrow the ifs diff?
Or just narrow the ifs diff?
- Thu Nov 30, 2017 5:55 pm
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
And more stuff
Light
Light
- Sat Nov 25, 2017 7:03 pm
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
We shall see if all the worship to numbers pays off think ill chuck it on the engine dyno at kopu engineering once its run in.
Cheers josh wheres the rano now? Still in storage?
Cheers josh wheres the rano now? Still in storage?
- Sat Nov 25, 2017 12:04 pm
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
More pieces to the puzzle.
Turbo and precomps turned up.
Picking up flywheel Monday.
Cheers to Jarrad at turbocare for the loader turbo
Even the young Sid's happy bout dads plans
Turbo and precomps turned up.
Picking up flywheel Monday.
Cheers to Jarrad at turbocare for the loader turbo
Even the young Sid's happy bout dads plans
- Thu Nov 16, 2017 12:19 pm
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
No worries decided on billet as I'm getting it balanced anyway.
And happy to support the kiwis building them. Will get a cad file out of it too.
So if anyone else is keen they can grab one.
And happy to support the kiwis building them. Will get a cad file out of it too.
So if anyone else is keen they can grab one.
- Thu Nov 16, 2017 6:20 am
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
Few more bits on the way.
S200g Borg turbo from turbocare.
Twin scroll .64 ar gated housing 20 pound actuator.
Billet lightweight flywheel to suit viper clutch. (Quite reasonable price too $650+gst)
S200g Borg turbo from turbocare.
Twin scroll .64 ar gated housing 20 pound actuator.
Billet lightweight flywheel to suit viper clutch. (Quite reasonable price too $650+gst)
- Thu Nov 16, 2017 6:13 am
- Forum: Diesel Engines and Modifications
- Topic: Wastegate Creep
- Replies: 5
- Views: 5236
Re: Wastegate Creep
External gate? Or internal.
If it were internal could be actuator preload
If it were internal could be actuator preload
- Thu Nov 16, 2017 6:05 am
- Forum: Diesel Engines and Modifications
- Topic: QD32 conversion
- Replies: 13
- Views: 19737
Re: QD32 conversion
So that's an fs5r30a box too?
- Thu Oct 05, 2017 1:41 am
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
Bit more into it.
Might be time to get a virgin set and lay into them.
Precomp chamber volume will be increased and air/fuel exit resistance decreased.
Also going to set the injectors 60 thou deeper by taking down the heat shields.
Might be time to get a virgin set and lay into them.
Precomp chamber volume will be increased and air/fuel exit resistance decreased.
Also going to set the injectors 60 thou deeper by taking down the heat shields.
- Tue Oct 03, 2017 6:14 am
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
Starting to have a play before i buy a new set to port and fit,
Will get it how i want it then make some tin profiles to get them the same.
Mainly a blend job an slight enlargening of the mouth.
Also a small radius on th tip point in the cup to stop the heat cracking it so much.
Will get it how i want it then make some tin profiles to get them the same.
Mainly a blend job an slight enlargening of the mouth.
Also a small radius on th tip point in the cup to stop the heat cracking it so much.
- Fri Sep 08, 2017 1:34 pm
- Forum: 4WD Parts
- Topic: WTB GQ front bumper Palmerston North area
- Replies: 1
- Views: 884
Re: WTB GQ front bumper Palmerston North area
Beaten up one here but north waikato.
Cold beer owns it
Cold beer owns it
- Fri Sep 08, 2017 7:05 am
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
Now that's another thing to look at.
Alloy flywheel what'd it set you back?
Have had billet 3.8 ones made at about $550.
Not sure I'd want to carve the meat out of a standard one but could be worth looking at.
Alloy flywheel what'd it set you back?
Have had billet 3.8 ones made at about $550.
Not sure I'd want to carve the meat out of a standard one but could be worth looking at.
- Tue Sep 05, 2017 10:54 am
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
Yeah fair call , Dont have the cash for a crank as well unfortunately, Will just have to leave the tune about where it is but drop the compression a tad and fit a gate to regulate boost. When i get some more bush cleared and some regular income off my block i'll look at it i reckon. But then i did c...
- Mon Sep 04, 2017 12:44 pm
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
A couple on fb.
Nothing spectacular haha should have got it to the drags,
New build have a viper clutch to try and will ditch the clutch booster.
Will send front dampener to pressure plate to balancer.
Nothing spectacular haha should have got it to the drags,
New build have a viper clutch to try and will ditch the clutch booster.
Will send front dampener to pressure plate to balancer.
- Sun Sep 03, 2017 6:38 pm
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
Never dyno'd it. Kept up with a trundle truck full of tools spares etc with slipping clutch in 3rd 4th, That was 200kw. My pumps a 12mm 1hd hybrid. Turbo nozzles more crack pressure shimmed in. Modded intake , cooler, airbox 4" to turbo inlet, Standard twinscroll cat 3126 turbo think its an s20...
- Sun Sep 03, 2017 2:20 am
- Forum: 4WD Parts
- Topic: FS QD32 / TD27 Turbo kit
- Replies: 5
- Views: 2102
Re: FS QD32 / TD27 Turbo kit
Got a 32 intake you can part with?
Long runner 2 piece style.
Long runner 2 piece style.
- Sun Sep 03, 2017 2:12 am
- Forum: 4WD Parts
- Topic: Wanted mk /mq bits
- Replies: 5
- Views: 2379
Re: Wanted mk /mq bits
I got swivel hubs but i want high steer too.
- Sun Sep 03, 2017 1:48 am
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Re: Angrier td42t build
Haha did look at a cradle setup, There is bosses in the block down one side of the mains, Be interested to see the dakar 42 engine with its pants off, Got a feeling harmonics killed this one, Will sneak the piston/rods onto her flash digital scales haha, After a couple bits though, Precups - new (st...
- Sat Sep 02, 2017 5:57 pm
- Forum: Diesel Engines and Modifications
- Topic: Angrier td42t build
- Replies: 26
- Views: 17143
Angrier td42t build
Well last tune snapped the crank and orange is sitting idle.
Time to build it properly.
Balanced rotating assembly.
Shotpeened polished and nitrided.
Stage 2 cam
Valve springs?
Ported head and precups
Injector drop
Amputated qd32 manifold
Big gate and same old 3126 cat turbo
Time to build it properly.
Balanced rotating assembly.
Shotpeened polished and nitrided.
Stage 2 cam
Valve springs?
Ported head and precups
Injector drop
Amputated qd32 manifold
Big gate and same old 3126 cat turbo
- Sun Feb 19, 2017 7:24 pm
- Forum: Nissan
- Topic: What are these worth??
- Replies: 7
- Views: 2538
Re: What are these worth??
Got a spare front diff if you need it josh.
- Wed Sep 21, 2016 7:11 pm
- Forum: Nissan
- Topic: Cheap Safari for sale .... only $29800
- Replies: 9
- Views: 3353
Re: Cheap Safari for sale .... only $29800
wonder if they do insurance valuations??
- Tue Sep 20, 2016 11:34 am
- Forum: Nissan
- Topic: Y60 underhood hoses...
- Replies: 7
- Views: 2092
Re: Y60 underhood hoses...
definitely look at a donaldson pre cleaner if dusty roads is an issue .
compared to a standard snorkel hat they are awesome .
compared to a standard snorkel hat they are awesome .
- Sun Sep 18, 2016 2:29 pm
- Forum: Nissan
- Topic: Y60 underhood hoses...
- Replies: 7
- Views: 2092
Re: Y60 underhood hoses...
don't really have to move much if you come through the corner ot the hood with yer snorkel . put my vac vessels on the drivers side and batteries in the boot