Offroad-Express

crzyfl

I think that the intakes are opposite sides, stock G16a is on passenger.

crzyfl

Rocky road sells a Toyota kit,

Low range sells a TC kit.

Not many TC boxes around in NZ, but looks like a simple job

crzyfl

Choppa wrote:How much for the g16a block and what comes on it?

Sorry it is a g13a block. If you want I have the following off it (common between g13a and g16a)

Mech fuel pump
Alternator

1300 carb and manifold

crzyfl

Suzuki alloy rims, 8" wide I think, if anyone interested I will post photos and measurements.

Manual box

Transfer case

FTS struts.

1300 G13a block

1300 alternator

1300 carb plus manifold

Offers.
Going towards funding further developments on my vit.

crzyfl

your playing with lots of black magic and science there mate good luck with the experiment :D Thanks, Looking to share everything I learn on this, the carbs can be had for $100-200. First time doing any head work for me, so will maybe post on this too. Other than the TBI and MPFI standard set ups, ...

crzyfl

Thanks Looking at running the most lift I can, Thinking about increasing lobe separation angle, and advancing timing. Really not sure about what duration right now. Important to bear in mind the (awesome) th180 / trimatic auto box. With the torque converter, my understanding is that if it slips beca...

crzyfl

So I have had some Mikuni quad carbs lying around for aaages. Last week finally went to the engineering shop to get the manifold fabbed. Talking to a mate with 2 sets on his rover V8, and we decided the Vit needs a cam at the same time. I know Low range has a couple of aftermarket cams, but we have ...

crzyfl

You could Hagen widen the front, just need spacers and a stub axle made up.

crzyfl

Not sure Dunedin, can find out who is good in Gore...

Mine is on its way down south FINALLY.

crzyfl

Gsxr. Google geckocycles. Spacing is right for 1300.

crzyfl

They are flexi flares. Low range off road. 100mm wide. Can't remember the price.

crzyfl

Bump selling

crzyfl

Selling my vit much to my reluctance (relocating) $12000 Check my thread for details. It will come with a spare manual box, gsxr carbs and a blank plate to make an intake manifold, 110 amp alternator. Key features are, 5.79 ring gear in diffs Front and back lockers Steel front diff housing 2" b...

crzyfl

Right, Got stuck on the 42 traverse, shouldn't have, front locker not working. Stripped the front end, found the bulkhead fitting that goes from the flex plastic lines to the inside of the diff copper lines was leaking. Second time. Sorted that. Put it back together with the widening mod back. (seco...

crzyfl

if you are going body lift, go for the three inch. I have 3" springs, and 3.5 inch coil spacers up front. Good clearance, but had camber problems until I moved the strut mounts out at the top.

crzyfl

What is going on at Haast?
Probably moving (back home) to southland. So will be around looking for some mud.

I got some extended brake lines from Jimnybits, work real good.

crzyfl

Mate is selling his.
Any interest, pm me and I can get some pics.

Vehicle is located in ruapehu area.

crzyfl

Sometimes the cv on the passenger side (flanged) does not go all the way in if you take it out when you are working on the suspension, then put it back together.

crzyfl

NZD delivered,
Low range off road superwinch $240
Low range off road warn premium $280
4wdbits AVM 400 series $356
Bits4vits unknown brand $200

crzyfl

What is the best place to buy a good set of manuals? Looking at getting them from low range in the us. $200 us including shipping on a set of superwinch ones.

crzyfl

crzyfl

Inside splined end can be 22 or 26 spline. I have heard that all of the outside (hub) ends are 26. Just wanting some confirmation.

crzyfl

What pcd? Got some alloy ones $400

crzyfl

Got an older vit with 22 spline cvs. Question. Do these have 26 spline outer ends? Wanting to buy some manual hubs.

crzyfl

Pico,
mind giving some details about your power steering upgrade?

crzyfl

thanks churchill, would have done that but the old one went to the tip accidentally. Fixed problem by increasing length of threads on rod by ~60mm. Once that was done it was fitted in five minutes.

crzyfl

Got mine from the puke parts world. Gonna run you a grand. With the exchange rate be worth checking to see what the calmini anvil will cost you.

crzyfl

2+2 is a good option. Gets expensive and complicated quick going bigger. Agree with Pico, won't need steering spacers for 2" body. I'd run it with just springs and shocks before changing diff drop brackets, and adding rear driveline spacer. You will need camber bolts for the front struts. Hamme...

crzyfl

There was a g16b baleno motor up at Horopito. Give them a call (smash palace) I think he wanted $500.

crzyfl

Had to replace transmission cable due to it being melted during electrical short problem. Got a new one on trademe from a wrecker. He tells me it is from an early swb 3 speed, same as mine. When I go to fit the cable, it appears too long in the pin section that attaches to the selector on the trans....

Search found 224 matches

Re: Vitara snorkel question

Re: power steering

Re: Selling some stuff

Selling some stuff

Re: Custom cam (and quad carbs)

Re: Custom cam (and quad carbs)

Custom cam (and quad carbs)

Re: Wider track for on road

Re: Replacement 3" lift springs ???

Re: Motorcycle Carbs on 1300 suzuki 4WD engine

Re: V6 springs + VL Commadore shocks

Re: V6 springs + VL Commadore shocks

For sale

Re: V6 springs + VL Commadore shocks

Re: Just purchased a 3inch calmini lift kit. Instal

Re: Lift & 31's and stuff

8v 3speed soft top vit for sale

Re: Broken 3"calmini kit

Re: Manual hubs

Re: Manual hubs

Re: calling all suzuki escudo /vitara owners and hoarders lo

Re: Manual hubs

Re: Steel wheels

Manual hubs

Re: Lift & 31's and stuff

Re: Auto transmission cable.

Re: calling all suzuki escudo /vitara owners and hoarders lo

Re: escudo tyres, rim offset and body lift etc

Re: g16_ wanted

Auto transmission cable.