Offroad-Express

JONO250

this will answer all your questions. good bit of reading
http://www2.pajeroclub.com.au/forum/sho ... hp?t=35256

JONO250

Been looking at pajeros, particularly the 3.5 models. I see some are GDI and some are non GDI. I have been told that the GDI engine is not as good as the non GDI. Is there any truth to this?? Also, is there anything common problems with these engines that I need to look for when purchasing?? I curre...

JONO250

still available

JONO250

hey ,tidy looking paj. been thinking about selling my diesel paj for a while and getting a 3.5. wee bit out of my price range though, you flexible on price at all?

where abouts in auckland are you located?

JONO250

thanks for that, sounds like co2 will be good enough for what I want. I see on trademe they sell heated regulators for co2. Do I need to run one of these?

JONO250

I have one of these welders http://www.trademe.co.nz/business-farming-industry/industrial/manufacturing-metalwork/welders/auction-929489953.htm (didnt pay 1/3 of that price tho) and its been an awesome welder to learn with. Run C02 with it. have welded exhausts, tow hooks, patched rust holes and my...

JONO250

any one with a factory qd32 navara either knows what they are worth or doesn't appreciate how lucky they are not to own a zd30 one. you could however buy zd30 navara with a blown motor,(plenty of them laying around the country side) and buy a qd32 to go in + certification for less then the price of...

JONO250

theres a few decent 3.2's on trademe at the mo,,, all down south thou. would rather get a factory 3.2 than go through the hassle of doing an engine conversion. heard to many horror storys about the zd30 engine ( in patrols). never driven a non turbo 3.2, but have driven a turbo one and loved it. my ...

JONO250

I am in the market for a navara ute. late 90's to early 2000's D22 shape, 3.2 diesel (no ZD30's).

prefer a double cab but would consider a single or king cab if it was the right ute.

anyone got one they are looking to get rid of?

JONO250

hey guys.

what are the suzuki j20a engines like for reliabilty e.t.c.? any common issues with them? will they take a bit of a thrashing??

thanks

JONO250

Hey guys, have two suzuki sj413's for sale, would prefer to sell both as a package. Located west auckland. Open to all offers. First one is a 1988 sj413. Has current wof (1 month old), rego on hold. Runs and drives. Has got small of rust coming through in various places in the body, needs a bit of T...

JONO250

Anyone on here running these setups on thier trailers? I am looking into building a trailer and am thinking about running this type of suspension. Just after a bit of feedback on it.

Any good places to purchase from??

Thanks

JONO250

Up to $500. Not looking for anything flash as it is only going to get cut up and modified.

JONO250

Anyone on here got any old trailers lying around that they want to sell? Im after something to mount a engine driven welder on. Anything considered.

JONO250

taz01 wrote:can do a pair of 7" pencil beam 55W HID spotlights for $200 been tested at woodhill and kiwi teams challenge

any pics??

JONO250

myne pumps out a fair bit. did not get any worse after I fitted a turbo. I would be more concerned about checking condition of bigend bearings before fitting a turbo

JONO250

going from memory, pretty sure it is just a standard flat flywheel

JONO250

hi just wondering how much you are after for the engine only?

JONO250

Shark wrote:Facepalm... dammit..

Thought 60 series patrol

where abouts are you based?

JONO250

they all rust out 1st gen 2nd gen e.t.c. have been quoted as low as 400 to replace with solid glass and rubbers so shop around

JONO250

dont touch them, speaking from personal experience. gutless underpowered pos.

JONO250

hi mate i have one. pm me

JONO250

still got the rear bar?

JONO250

have fitted one to myne (bought from offroader / scarles on trademe). direct copy of a safari snorkel. awesome products, cannot fault it.

JONO250

After an intake manifold off a 4.2 diesel patrol. not to concerned about condtion as it is going to get chopped up and modified. if anyone has anything ,flick me a pm. cheers

JONO250

is it fine to run a uhf aerial base/ wiring kit on a am cb radio? i just bought a kit and it sais its for uhf but my radio is am. the plug still fits into the back of my radio.
thanks

JONO250

scored a brand new scarles turbo for cheap, same type that is thier kit. going fit it to my safari in the next couple of weeks, so will let you know how it goes. just by looking at it i get the feeling they are the same as any other chinese turbo, which have a reputation of grenading.

JONO250

have been running 8.8 bolts in a nissan pto, and stripped the gear in my winch before the shear pin broke, would reccomend putting a proper shear pin in.

JONO250

hey, i have four new gearbox spacers to suit a gq. pm me.

JONO250

hi i had one in a safari running over 20 pounds boost and never gave me any issues, however this was a factory turbo

Search found 171 matches

Re: 4m40 more power, egt

Pajero 3.5 GDI engine.

Re: 2x Suzuki SJ413's

Re: FS: Pajero 3.5

Re: Welder

Re: Welder

Re: Wtb Nissan navara 3.2 diesel

Re: Wtb Nissan navara 3.2 diesel

Wtb Nissan navara 3.2 diesel

suzuki escudo j20a

2x Suzuki SJ413's

Duratorque trailer suspension.

Re: WTD: Trailer, Auckland area.

WTD: Trailer, Auckland area.

Re: Wanting to buy some Spotlights!

Re: TD42 blow by

Re: TD42 Flywheel. Flat or Recessed?

Re: F/S TD42 + Auto trans

Re: 60 series PTO winch

Re: WTD: Good Cond. SWB Safari Rear Windows

Re: Are the 90's 2.8 Turbo Diesels OK?

Re: Any one got a blown TD42??

Re: hilux ute chopd surf and chassis f.s

Re: Cheap Snorkels On Trademe

Wanted :TD4.2 Nissan Intake manifold.

Re: Clearing up the confusion on radios....

Re: "Offroader" Turbo kit

Re: PTO Shear Pins

Re: GQ parts wanted..

Re: Turbocharging the nissan RD28.