Offroad-Express

scruff123

Anyone keen to head out ahipara for a play tomorrow? Got afew guys that may be keen but otherwise will be on my own wich is a bit boring haha

scruff123

Anyone one heading out offroad in or around (dont mind travelling a hour or so) taranaki? Been living here afew years and getting back into 4wding. Need to get to now afew people to head out with. Thinking of joining club but just keen as to get out asap. Cheers mike

scruff123

ive got a set of 32s on the pajero, done 10k on them and wear is minimal, very happy with them offroad, clear very well in mud and clay. and not too bad in sand at low pressure. good bang for ya buck i reckon. i do find them quit noisy on tarmac compared to the higher quality brands and they do lack...

scruff123

Cheers guys

scruff123

hey tried the search and google but no luck

what do you usually do with the sensor after the catalytic converter when taking the cat converter out?
its a 96 3.5
guy that done the exhaust has just tucked it up by the trans. is this ok?
cheers

scruff123

whanga road is no go, big slips at both ends

scruff123

Heading out there tuesday goin in from aotuhia. Aparently slip is at whanga end. Will keep posted

scruff123

Anyone know the condition of whanga rd at the moment? Heard rumor of it having a slip blocking acces through. Anyone know how far in the slip is etc? Cheers

scruff123

Anyone around palmy heading out anywere tomorrow that i could tag along with?? Otherwise thinking of heading out foxton and up the coast to himatamgi

scruff123

Finally got my muddies on her..

1996 3.5 v6

scruff123

anyone keen to head out whanga road on monday? Headed out there on the bikes last weekend and track was in not to bad condition most of the way. Very wet tho. Just got some muddies on the pajero so keen to take that out if afew other trucks are able to come. Let me know if keen and can sort a time. ...

scruff123

looking good, getting some tires for mine soon, whats the fuel usage like running 33s?

scruff123

engines good, mate has one and thrashes the tits off it and still runs mint, lives on redline pritty much, fuel consumtion is average, but what would you expect out of a largish cc 4 cyl 4x4

scruff123

got home sweet after disconecting vacume hose on actuator on diff, will get manual hubs soon and new solenoids

scruff123

Cheers for ideas, staying in hamilton to brake trip up, traffics been hectic, will cruize back in 4 high and sort out at home. Cheers

scruff123

Hi, hopefully someone can help, im pritty shure i have a dud solenoid as when im slowing down i get a whine sort of grinding noise and a clunk just befor i stop. If i put into 4wd as soon as it starts the noise it will go away. Also having trouble getting out of 4wd- lights on dash keep flashing and...

scruff123

finally found myself a truck.
1996 3.5 v6. non gdi
170k

pritty stoked at how tidy it is

scruff123

scruff123

Hey guys after a swb v6 pajero. Looking to spend around 4-5k

Cheers

scruff123

If not sold in a couple of months im keen as mate

scruff123

would leaving the balancer shaft belt off cause this?

scruff123

It wouldnt be bearing clearances would it??? Hope not. Sounds like coming from top end not bottom

scruff123

Yup correct head gasket thickness used. It is a non turbo head on turbo block but shuldnt make a difference. And yes bores were given a de glaze. Nt shure if it was enough tho as bores were a bit scored and old pistons had dents in the top from something getting into the cylinders. Was just ment to ...

scruff123

any ideas on what this noise could be? has me stumped. have reset tappets, cracked injectors-slight decrease in noise but not shure if it just because the revs drop and it stutters wen only running on 3.
https://www.youtube.com/watch?v=Wizl0zQvaqs&list=UUiEufeFGBcIVor-sVIFp9fA

scruff123

FORGE1 wrote:Picked up a 1998 mitsi challenger v6 for $500 only needs a new exhaust flexi and she's going again. Give it to the mrs for a toy as she complains its boring in the passengers seat.

always sussing the deals aye ray haha

scruff123

Marco Polo wrote:
scruff123 wrote:does anyone know were i could get a flywheel machined in taranaki area?

Brake and clutch Gill street opposite Partmaster

cheers man

scruff123

does anyone know were i could get a flywheel machined in taranaki area?

scruff123

all sorted got engine etc all in today, runs mint!

scruff123

can anyone tell me how to remove the clutch fork?

scruff123

Parts sorted 1mm oversized pistons. Ans slight bigger bearings. Hopefully have it all done and back in ute by sat

Search found 101 matches

Northland 10/10/15

Taranaki

Re: comforser tyres

Re: cat converter

cat converter

Re: whanga road

Re: whanga road

Re: whanga road

Palmy

Re: show us your mitsi!!!!!

whanga road

Re: Finally got my Pajero

Re: 2.6 petrol MU

Re: URGENT super select 4wd

Re: URGENT super select 4wd

URGENT super select 4wd

Re: 6th-7th december

Re: wanted: swb v6 pajero

wanted: swb v6 pajero

Re: F/S Mitsi pajero 3.5v6 manual, SWB, Tauranga

Re: 4d56t knocking/tapping noise after new rings and bearing

Re: 4d56t knocking/tapping noise after new rings and bearing

Re: 4d56t knocking/tapping noise after new rings and bearing

4d56t knocking/tapping noise after new rings and bearings

Re: 2nd nov

Re: rings and bearings

Re: rings and bearings

Re: rings and bearings

Re: rings and bearings

Re: rings and bearings