Offroad-Express

jj1959

Just seen this post. Having the same problem. Just swapped on a KZJ71 body. The link no longer works to jaycar. What was the part called & would you still have a part #

jj1959

Still looking. Turns out I was put crook about what they come off. Apparently I want the ones that come off a SW20 Gen3 turbo. Anyone know where I can get some from?

jj1959

I have the LJ78 rear rotor & that is why I really would like to use the 22v caliper as they match the disc diameter better & I need the truck to stop on 35's for cert & have a half by decent hand brake. My preference would be to put a complete KZJ78 rear in the truck but unfortunately ca...

jj1959

The turbo ones have a bigger piston area apparently & they fit the Prado ventilated disc. They are marked 22v

jj1959

Hi. I'm after some rear calipers off of an old MR2 AW11 turbo to do rear brakes on my Bundera

jj1959

Just a reminder

jj1959

Round 4 of the 4x4 Nationals is in Hawkes Bay on 15th Feb 2015

jj1959

Use proper compressor oil rather than engine oil or CRC. Mixes better in air and will also lub your air tools better. Cheap as from Supercreep. I used a Hiace master cylinder as an oil resevoir & a 1mm oil line into the suc side of pump. Works sweet as. don't worry about collecting the oil again...

jj1959

Swaps easy. You just need a bellhousing, flywheel & clutch. Throw away the ECU & go manual pump, that way you can get rid of all that emmision control rubbish. Modify the engine mounts & cert

jj1959

If that's all I can get. 4.8 high pinions are like rocking horse do do now. What brand. And does the Bundera flange fit the pinion or is it an 80 series one

jj1959

Anyone have a 4.8 high pinion to fit LJ/ KZJ70 series. Mine looks a bit second hand

jj1959

Hi Reece. I don't know where you get the idea that your not welcome at the local clubs. I have said to you before to come along and have a go we have all sorts in our club.

John Jones
President
Hawkes Bay 4WD Club
ph 0274447734

jj1959

Few weeks ago I replaced the LSPV with a Willwood brake proportioning valve, seems the truck passed wofs and cert(twice) with next to no rear brakes. All sorted now, a bit of a concoction of fittings but works.

Where did you get it & what was the part no.?

jj1959

The genuine part number for the 76-90 degree thermostat is 90916-03119. I've fitted a few to vehicles that do a fair bit of towing. There are only the 2 options available here, the 76-90 degree and the 82-95 degree (the standard type). I bought a new 71- 90 from HB Toyota the other day. Now unfortu...

jj1959

Nissans are real bad for the glow timer not matching the light. Let it glow and wait for the click of the glow circuit turng off rather than the light and see how it starts. If it still starts bad check the glow plugs.

jj1959

My bad. Rules have changed obviously

jj1959

Why did you have to do a drive shaft loop? Your trucks not a scratch build. All you've done is a motor transplant. Your cert guy knows squat.

jj1959

Only tends to break on those steep uphill deep mud climbs where you get pulled in to bank dont want to take your post out of context or anything but when a winch cable breaks can sometimes be predictable (usually when you know your overloading it) but the rest of the time it can be very unpredictab...

jj1959

Most of the time 10mm is ok. Only tends to break on those steep uphill deep mud climbs where you get pulled in to bank. Winch usually complains a bit before that happens. Then you stop and change to double purchase. If your on such a steep bank that your going to come plunging backwards if the rope ...

jj1959

Have put a 5mm high tensile cap screw in mine so it won't break there and then put a shear flange with a 8mm mild steel shear bolt in it further along the shaft so that you can get at it when your balls deep in do do. I break my 10mm plasma before the shear bolt. Plasma is easier to fix.

jj1959

Why bother balancing them. The first time you go off road the balance will be screwed anyway. Just get a good steering damper & stronger arms.

jj1959

The spots are 12V 50w halogens from house down lights mounted in a bit of PVC tube. $3.50 each from Mitre 10. I repowered with a 1kz with manual pump last year. 2LT motor really lacked a bit in power even with the boost wound up to 15psi and lots of extra fuel thrown at it. Also 2.5" exhaust wi...

jj1959

I've had one for years. Had the old 2lt until last year. would power 33's just but tended to run out of horses when you really needed them. Repowered with 1kz. what a difference.

jj1959

SORTED is this YOU JOHN

Cheers for all that Jim. We had a great time hope to see you guys again sometime.

jj1959

Hi Jim. Got any vids of Napier team
Cheers John

jj1959

I know where you can get a trans in HB

jj1959

All your wheels the same size????

jj1959

hi saddam can you remember the size and wall thickness of the pipes as in inadequate is ....... adequate is.......... how strong to make such things but not throwing too much weight in is always a hard call so most of us tend to make things overkill and the downside is extra weight. mine are not so...

jj1959

Totally agree. The A/Ts don't last very long & go out of round as well. We have them on our fleet vehicles. 25k & they are out of round. 30 k and they won't pass a warrant.

jj1959

Have an ln60 chassis for sale.

Search found 70 matches

Re: 2lt tacho pulse

Re: MR2 AW11 Calipers wanted

Re: MR2 AW11 Calipers wanted

Re: MR2 AW11 Calipers wanted

MR2 AW11 Calipers wanted

Re: NATIONAL 4x4 TRIALS 15TH FEB- HAWKES BAY

NATIONAL 4x4 TRIALS 15TH FEB- HAWKES BAY

Re: ac as air compressor?

Re: Toyota surf 2lte to 1kzte conversion

Re: 4.8 High pinion wanted

4.8 High pinion wanted

Re: Its not a project.... honest lol

Re: LJ71 Ute Chop and Repower

Re: Hilux Surf 1KZ-TE Engine Running Temp?

Re: Nissam Mystral TD27 hard to cold start in the mornings

Re: LJ71 Ute Chop and Repower

Re: LJ71 Ute Chop and Repower

Re: Pto winch strength

Re: Pto winch strength

Re: Pto winch strength

Re: Plastic BB'S in tyres

Re: LJ70 Info required

Re: LJ70 Info required

Re: Westport Challenge

Re: Westport Challenge

Re: prado auto

Re: 4wd binding virbration

Re: Help With rock sliders...

Re: Good year all terrains??

Re: WTD: yn60 surf