Offroad-Express

Kampfer

Wow, looking good. That is going to be a lot of fun when its up and running

Kampfer

Had a similar issues with my mates cars. It might sound stupid but is the Clutch Plate in the right way around? And the other one would be check it compared to the old one. The new clutch plate we installed was 15mm short on the flywheel side I believe which didn't help much. Unfortunately It means ...

Kampfer

Damn that would of been useful a couple of months ago. was Trying to get a wind sreen out of a fj45 wreak for my project but ended up cracking it. I was using my usual trick for getting glass out of running 2 screwdrivers around the edge to flip the rubber around. Works great on the side windows but...

Kampfer

Yeah agree with putting it as high as possible. I've got mine in my glovebox and I've made sure all the panel joins around it are fill with silicone. I've seen guys that have the ECU in the engine bay putting them in the snap lid box and putting as much silicone as possible around the holes for the ...

Kampfer

Yeah its not in any of my manuals either. It's an 1984. They go in behind the inner oils seal. They have to be installed through the hole for the diff. the short sides easy enough to get back in the long sides a bit more interesting.

Kampfer

We be figured out it's a bush/spacer. Any clue which way it goes up. I've found the other one flooring in the botten of the diff housing as well.

Kampfer

http://www.trademe.co.nz/motors/used-ca ... 133067.htm

Ex police FJ45 troppy

Kampfer

I've got a late fj40 Passenger seat with no rails if anyones really keen.

Kampfer

Don't do what my mate did and crash into the wall wiping out his car in The Jalopy races before he got to the demo derby.
First race out of 3, on the second lap.

Kampfer

Beautiful truck, I hope mine turns out half as nice.

Just don't scratch the paint taking it offroad

Kampfer

Looked like an Awesome adventure, and for a good cause.

Loved teh last little bit at the end about the government.

Kampfer

I've got a passengers seat out of a 84 FJ40. Mostly in One piece just no seat rail. Not sure the rails would work with 68 any way.

Also we need to see pics of the Truck

Kampfer

Na its an Early FJ45. Its got the same Gearbox mount as your but no engine mounts. And the body mounts are all different. Fortunately they are the only good parts on my original Chassis, it shouldn't be to much of a hassle to swap them over.

Kampfer

Interesting, It must of been about 78 when they changed the Chassis design. My 84 has completely different mounts for everything. Not much help in IDing mine though lol. My original Chassis has cut short and and is pealing apart with Rust, And my new one I've imported from Aussie has the wrong mount...

Kampfer

Looking good. A lot better than my new chassis. What year is your truck? I'm trying to figure out a rough idea of how old my replacement chassis is.

Kampfer

Nice I defintly a better base for a Rebuild than what I got. Should be a nice truck when it done.

Kampfer

Thoughs guard look good. Might have to borrow that design if I ever redo mine.

Kampfer

http://www.trademe.co.nz/motors/car-parts-accessories/toyota/exterior/auction-886532903.htm

Kampfer

Damn that's a lot nicer than my P.O.S.

Dad (coxsy) posted a pick up of mine in "Show us your Toyota" thread.

Kampfer

I've Just got an 84 45 really jealous your has the factory wellside, would really love one of them but there so hard to find over here. For a tail gate try these guys http://coolfj40.stores.yahoo.net/tafjpi.html I'm pretty sure I've seen hinges on there site. Lots of other good parts there. Shipping...

Kampfer

Should of posted these up a long time ago,

Affordable Fuel Injection
http://www.affordable-fuel-injection.com/ixxocart/catalog/Toyota-34-1.html

And Davis United Ignition Distributors
http://www.affordable-fuel-injection.com/ixxocart/catalog/Toyota-34-1.html

Kampfer

I've got a late modal Fj40 wiper sitting around. Is there much difference between them?

Kampfer

Had something similar in my Truck when I got it. Ended up scraping it and putting in the full cage I got from my first truck. I could make on up, but I would find certified welder to weld it up properly. My welds are a bit inconsistent for that sort of thing.

Kampfer

I don't believe they came with a standard roll cage. I know the Soft top trucks had a simple tube frame to support the soft top. I've got the 2 pieces that go over the doors some stored away somewhere.

Kampfer

My Cruiser has a 10mm spacer on each side in the front, but I can't remember what the wheel studs are off.

Kampfer

From what I know the Toyota diesels are pretty built proof provided they have been regularly Serviced. Even so they are getting to the stage where seals and bearing are getting past there used by date. As with any old vehicle you just need to fix any problems when the come up. Parts are easy to get ...

Kampfer

Looks like a fun toy.

Tail light looks like the standard factory one. Not sure on the legality of the doors but I have heard of people removing them completely for a wof then putting them back on afterwards. Can't really help with anything else.

Kampfer

I've got a Holley 2 barrel Rebuild kit sitting around here. Got it for my first FJ40 but never got around to using it.

Let me know if your intreasted.

Kampfer

My dad and I where thinking of heading up there on the 3rd. Should be there around 9.30 if you want to meet us there.

Kampfer

Looking good, I'm a qualified engineer and my rust repairs weren't that pretty. Gets really dis-heartening doing rust repairs you start off there's a little bit to do, and by the end half your trucks on the floor as scrap. Next time I do mine the whole body tubs coming off. If you need a hand or any...

Search found 54 matches

Re: Suzuki Build

Re: 2000 TJ clutch problems..... loosing my mind over this

Re: Removing a windscreen SJ

Re: Waterproofing an ECU

Re: September 24th 25th

Re: September 24th 25th

Re: Trademe auctions (interesting TM auctions)

Re: fj40 seats

Re: Demo derby advice?

Re: HJ45 flatdeck restoration

Re: Malaysian 2014/5 Flood relief work

Re: 1968 FJ40 parts needed. SEATS

Re: HJ45 flatdeck restoration

Re: HJ45 flatdeck restoration

Re: HJ45 flatdeck restoration

Re: HJ45 flatdeck restoration

Re: FJ40 "just for bashing"

Re: Fj40

Re: WTD FJ45 parts

Re: WTD FJ45 parts

Re: FJ40 "just for bashing"

Re: FJ40 Wiper motor wanted

Re: WTB:Fj40 stock internal cage

Re: WTB:Fj40 stock internal cage

Re: Disk brake upgrade on fj40

Re: First 4wd

Re: new toy

Re: 2bbl Holley

Re: thompsons track

Re: Some Very Amateur Panelwork