Offroad-Express

Mazuki

Hi all I have a 5spd kjz95 prado with a sinking clutch pedal issue. I recently had to replace the standard prado master clyinder with the funny diaphragm thinng on the bottom for a standard landcruiser unit.just had to swap over the resivior as the prado one was shorter to fit under the heater pipe ...

Mazuki

Thanks for the input. from the vids it looks like a pretty easy track.
Think I'll throw some tow hooks on it any way just incase as they are cheap and easy addition.
Cheers

Mazuki

Hi all Not sure where to post this but this seems like to best place. My boss is considering taking his very standard 90 series Prado on the macetown track so I said I'd investigate for him as he knows I'm into 4wding. Just wanted people's opinions on the capability of a standard prado on this parti...

Mazuki

Here's my hack.
93 Goldwin edition
Custom front bar with 9500lbs winch
AVM front hubs
Lockrite rear locker
2inch Dobisin front n efs rear springs with commadore rear shocks
On board air
Auxiliary battery
15x8 rims with 31s

Crane not included

Mazuki

Hi drewz1

After doing a bit of research it seems the head does have to come off for the 8valve. Sorry to put you wrong , my experience is only with 16 valve motors and I mistakenly thought they both would be the same.

Mazuki

Yup Easy pessy. I think the cam may even have to come out first anyway as it is positioned over the head bolts ? Either way head removal is not required.

Mazuki

all cam specs and pricing is listed on their web site

http://www.aucklandcams.co.nz/cam_listi ... ?title=all

$165 is pretty good I recon bang for buck wise.

Mazuki

I'd be interested to know the price of a cam grind. The scudo lacks a bit of power running 31s

Mazuki

If your unsure if it has a locker. Simply jack both wheels off the ground and spin one wheel. Both wheels will go in the same direction (an open diff will spin wheels in opposite direction to each other)or you might hear the locker clacking very distinctively ( like horse shoe noise).

Mazuki

Sorry I did mean 2 speed not 2stage in my original post. But high locked and low locked mAkes sense. So does the "2 speed" transfer case refere to the hi and low speeds? dont most common 4x4s have a two speed transfer case ?

Mazuki

Hello all.
My boss has gifted me his 99' prado to use as a work vehicle.( lucky me)
I noticed that the gear stick for engaging low ratio has high, high low and low low. Did a little bit if research on Wikipedia and found the prada has a two stage transfer box.
What is the purpose of having this?

Mazuki

I'd get one of these if I had the cash http://www.trademe.co.nz/1023476470

Mazuki

Any idea where to source aisin hubs? Couldn't find a Supplier on the net. Just spotted super which, warn and mile marker brands off lowrange for similar prices to what's on trade-me. Anyone tried any of these ?

Mazuki

Hi all I'm in the market for a pair of manual hubs for my 94 escudo. There a few different brands on trademe (avm , force brand) and at varying prices. Would be good to hear people's expericnece with either brand or suggest other brands available. My truck is fitted with 31s and still has an open fr...

Mazuki

I'll be home or close to home for most of tomorrow. 1st in, first serve Give me a bell after 9am
021 253 87 92
Cheers. Paul

Mazuki

I have no idea what else it would fit other than a Ramsey socket. I can take a pick of the plug if you like and you can decided.

Mazuki

4 pin controller . Im in Upper Hutt Wellington .

Mazuki

As per title. Free to good home. Unknowen condition. Having a shed clean out. Would prefer a pick up but I can post at your cost.

Mazuki

I have a lockrite auto locker in my 1.6 escudo which I instaled myself. Up until today it's been fine but it has suddenly started making some weird noises and clunks. I am still yet to remove and investigate further but if worst comes to worst, who is the best person to get to rebuild in Wellington?...

Mazuki

Found the throttle position sensor to be the issue. Just required adjusting.

Mazuki

I have a g16a powered escudo. Since installing a snorkel, the idle has been more than excessive, sometimes reaching 2100rpm. At first I thought it may be a vacuum leek but after reaching normal operating temp it drops down to around 1000rpm.any help would be appreciated

Mazuki

Have only removed old manifold/turbo and tidied up a few bits so far. New exhaust manifold has arrived but waiting for the turbo unit to show up. This truck also has a second air con pump for inboard air to contend with, getting in the way of the intake. We have decided to continue using what we thi...

Mazuki

The YZF radiator was a brilliant idea. I would have suggested a Subaru rs turbo legacy water to air inter cooler and water pump, simply coz they are cheap and readily available. My neighbour and I are doing a very similar setup on his safari. Did you you the factory oil supply and drain lines for th...

Mazuki

x3 for the lockright auto locker. You do have to learn how to drive round abouts and sharp turning but any sacrifice made for on road driving is more than made up for when off road. I have only had to use my winch a couple of times since installing the locker. And there's one on trade me for $350 at...

Mazuki

Type in "tow hook mounts escudo" in to the google images. Plenty of pics

Mazuki

I have mounted my rear tow hooks, 1 on either side using a piece of 50x50x6 angle about 100mm long then bolted to the two 12mm holes at the rear of the chassis rails, usually were a tow bar would be mounted to. You will have to remove the rear bumper for this option though. The front is difficult if...

Mazuki

I have a whole engineering work shop at my disposal. Can help out after 4.30 on Wednesday. Have to be home in time for big bang theory though

I'm out in upper hutt. Cheers Paul

Mazuki

Hi all , my g16a 16 valve powered escudos cold start idle is around 2000 rpm and takes around 10-15 minutes of round town driving before the the gauge will register and then one the temp reaches 1/4 the idle might drop down to normal idle speed. Temp generally never go's over 1/4 with on road drivin...

Mazuki

G16a powered swb escudo. Running on 31's. Daily driver with recovery gear, hi lift jack etc on board. Getting about 70 - 80 kms per 10 litres, nana'ering it.... Luckily for me i only have to drive 3-4 mins to get to work.

Mazuki

A body lift will also help clear 30'' tyres. And half the price of springs.

Search found 48 matches

Sinking clutch pedal

Re: Mace town track vs std 90 series prado

Mace town track vs std 90 series prado

Re: Show us your SuZUKi

Re: G16a camshaft grind

Re: G16a camshaft grind

Re: G16a camshaft grind

Re: G16a camshaft grind

Re: 1990 suzuki escudo all over road

Re: Prado j90 2 speed transfer box

Prado j90 2 speed transfer box

Re: bullbar wanted

Re: Manual/free wheel hub options

Manual/free wheel hub options

Re: Ramsey winch controller and solenoids- free to good home

Re: Ramsey winch controller and solenoids- free to good home

Re: Ramsey winch controller and solenoids- free to good home

Ramsey winch controller and solenoids- free to good home

Auto locker setup/rebuild

Re: Fast/high idle

Fast/high idle

Re: Hello from Palmerston North

Re: Hello from Palmerston North

Re: looking for a cheap locker

Re: tow hook heeeeeelllllllppppppppp!!!!!!!!!!!!!!!!!!!

Re: tow hook heeeeeelllllllppppppppp!!!!!!!!!!!!!!!!!!!

Re: welly crew, can any one help out this week

high idle/low running temp

Re: Fuel use... What's your numbers .

Re: new to this game