Search found 1561 matches
- Thu May 18, 2017 11:04 am
- Forum: Events
- Topic: KIWI 4x4 Teams Challenge
- Replies: 22
- Views: 19280
Re: KIWI 4x4 Teams Challenge
Tried to ring , no answer, not sure if numer is correct, Cheers
- Thu May 18, 2017 7:30 am
- Forum: Events
- Topic: KIWI 4x4 Teams Challenge
- Replies: 22
- Views: 19280
Re: KIWI 4x4 Teams Challenge
Hi, have emailed kiwi4x4nz to see if there are still places and to see what the vehicle rules are and the event requirements / format are but haven't had a reply. Is it correct that each team is meant to provide a marshall. will they be stuck in one place or get to move around a bit. Thank you Cheer...
- Wed May 17, 2017 1:20 pm
- Forum: Events
- Topic: KIWI 4x4 Teams Challenge
- Replies: 22
- Views: 19280
Re: KIWI 4x4 Teams Challenge
Hi,
Is there anyone with a reasonably setup truck with a good winch interested in joining team, 2 trucks so far from Hamilton, V8 Zuk with hydro winch, Lexus D/Cab Hilux Runva 2-UP winch, let me know PM if interested and go from there.
Cheers
Tim
Is there anyone with a reasonably setup truck with a good winch interested in joining team, 2 trucks so far from Hamilton, V8 Zuk with hydro winch, Lexus D/Cab Hilux Runva 2-UP winch, let me know PM if interested and go from there.
Cheers
Tim
- Tue May 16, 2017 9:38 pm
- Forum: Events
- Topic: KIWI 4x4 Teams Challenge
- Replies: 22
- Views: 19280
Re: KIWI 4x4 Teams Challenge
Hi Mike,
What the event programme, is it Sat and Sun or Sun and Monday.
Cheers
Tim
What the event programme, is it Sat and Sun or Sun and Monday.
Cheers
Tim
- Fri Jan 20, 2017 6:49 am
- Forum: Tool Shed
- Topic: 2017 Mainland Winch Challenge
- Replies: 28
- Views: 5802
Re: 2017 Mainland Winch Challenge
clubman A is 33 and clubman B is 35
Is that measured size or sidewall size or manufacturers stated size ?? as all 3 will generally be different.
Cheers
Tim
- Fri Dec 16, 2016 6:32 am
- Forum: Tool Shed
- Topic: Name the broken bit
- Replies: 12
- Views: 3892
Re: Name the broken bit
Did that have a part time mod, was it welded ?
- Thu Dec 15, 2016 4:38 pm
- Forum: Planning a trip?
- Topic: thompsons
- Replies: 8
- Views: 4703
Re: thompsons
Hi Crash
Are you still doing this ??
Is that TeAroha to KatiKati on 28th and then KatiKati to TeAroha on 29th ??
Cheers
Tim
Are you still doing this ??
Few of us doing Te aroha to kati kati and back 28/29th December.
Is that TeAroha to KatiKati on 28th and then KatiKati to TeAroha on 29th ??
Cheers
Tim
- Fri Dec 02, 2016 2:08 pm
- Forum: Events
- Topic: Manukau Winch Challenge 2016
- Replies: 6
- Views: 7611
Re: Manukau Winch Challenge 2016
Here are some vids taken by someone else if you have access to facebook
https://www.facebook.com/zverstegen
Still yet to sort ours out, NZ Offroader was there too
Cheers
Tim
https://www.facebook.com/zverstegen
Still yet to sort ours out, NZ Offroader was there too
Cheers
Tim
- Sat Oct 29, 2016 10:42 am
- Forum: Events
- Topic: Manukau Winch Challenge 2016
- Replies: 6
- Views: 7611
Re: Manukau Winch Challenge 2016
Entry sent , fee paid, looking forward to some challenging stages.
Cheers
Tim
Cheers
Tim
- Tue Oct 04, 2016 11:56 am
- Forum: Tool Shed
- Topic: Best place to buy synthetic winch rope?
- Replies: 18
- Views: 4769
Re: Best place to buy synthetic winch rope?
I know nylon rope works well in tow/snatching applications, but might bind up on a winch drum under load? This is not why you would not use nylon rope for a winch rope. Winch rope needs to have minimal stretch before it breaks, otherwise it can be very dangerous, which is one of the advantages of p...
- Sun Sep 04, 2016 8:59 am
- Forum: Toyota
- Topic: 80 Series Hi 4WD noise
- Replies: 10
- Views: 2370
Re: 80 Series Hi 4WD noise
Yes later model one came with roller bearing and earlier ones with brass bush. Don't know if the bearing change coincided with the slightly longer CV and thicker drive flange and change from 12 valve to 24 valve On road bearing is probably better particularly if you are still full time 4WD. Off road...
- Tue Aug 30, 2016 3:09 pm
- Forum: 4WD Parts
- Topic: pto hydro pump
- Replies: 38
- Views: 11789
Re: pto hydro pump
Need to check what the max design pressure is for the pump, generally the pressure capability of a vane or gear pump does not change with rpm, just the flow. What pumps are you looking at.
Cheers
Tim
Cheers
Tim
- Tue Aug 30, 2016 2:34 pm
- Forum: 4WD Parts
- Topic: pto hydro pump
- Replies: 38
- Views: 11789
Re: pto hydro pump
What pressure will they do, as that is the other very important factor, often the higher the flow the lower the pressure.
Cheers
Tim
Cheers
Tim
- Mon Aug 29, 2016 1:41 pm
- Forum: Petrol Engines and Modifications
- Topic: Wtd to borrow Holden 5.0 EFI V8 Ign Module
- Replies: 0
- Views: 3528
Wtd to borrow Holden 5.0 EFI V8 Ign Module
Hi, Anyone in Hamilton got a Holden 5.0 EFI V8 Ign Module that I could borrow to see if mine is the problem. Looks like this http://www.sparkshop.co.nz/Catalogue/Product/Product/40-329 Or even further away if you can do without it for a few days, I would pay for post. Thank you Cheers Tim
- Sun Aug 28, 2016 9:34 am
- Forum: Petrol Engines and Modifications
- Topic: Holden V8 5.0 VP EFI Won't Go No Spark ????
- Replies: 7
- Views: 7093
Re: Holden V8 5.0 VP EFI Won't Go No Spark ????
Cheers, yes had a bit a look on just just commodores and aussieV8.
Anyone in Hamilton area that would have an ign module I could borrow to see if it works.
Cheers
Tim
Anyone in Hamilton area that would have an ign module I could borrow to see if it works.
Cheers
Tim
- Sat Aug 27, 2016 10:18 pm
- Forum: Petrol Engines and Modifications
- Topic: Holden V8 5.0 VP EFI Won't Go No Spark ????
- Replies: 7
- Views: 7093
Re: Holden V8 5.0 VP EFI Won't Go No Spark ????
Thank for the comments, I am using an LED probe, with the ign on both sides of the coil are +ve, read on the net that with test light accross the the coil it should flash when cranking, it did flash one time when I was testing but now nothing. No spark from coil output in the dark. Looks like the ig...
- Sat Aug 27, 2016 4:34 pm
- Forum: Petrol Engines and Modifications
- Topic: Holden V8 5.0 VP EFI Won't Go No Spark ????
- Replies: 7
- Views: 7093
Holden V8 5.0 VP EFI Won't Go No Spark ????
Hi, Was running fine. Went to start it in the morning, fired up then stopped, as cold. started again and fired up then stopped, tried again, no go, no spark. Looking for some advice where to look first. With the ign on there is power to both sides of the coil ? When I crank it both sides of the coil...
- Mon Aug 22, 2016 2:36 pm
- Forum: 4WD Parts
- Topic: pto hydro pump
- Replies: 38
- Views: 11789
Re: pto hydro pump
Don't think line size has a major effect on cooling requirement, unless silly small causing alot of pressure drop, more about reservoir size (amount of oil to heat up) , how hard winch is working and amount of time spent winching versus cooling off time.
Cheers
Tim
Cheers
Tim
- Mon Aug 22, 2016 10:48 am
- Forum: 4WD Parts
- Topic: pto hydro pump
- Replies: 38
- Views: 11789
Re: pto hydro pump
Couple of additional comments. For my cooler I just used an intercooler on the return line which has a large flow area and is robust and cheap. For the control I am just using a log splitter valve which has the relief built in, much cheaper. For hoses, no need to spend that much if you are using JIC...
- Wed Aug 10, 2016 5:36 pm
- Forum: Drivetrain / Suspension
- Topic: rubber bushes replacement
- Replies: 3
- Views: 3400
Re: rubber bushes replacement
Don't think they will work if it is still the standard 4 link with panhard, it relies on the flexibility of the rubber to allow it to flex. Whereas 3 link with panhard would be fine with sphericals.
Cheers
Tim
Cheers
Tim
- Thu Jul 07, 2016 10:39 am
- Forum: Tool Shed
- Topic: Suspension links
- Replies: 36
- Views: 8497
Re: Suspension links
Bad news is you are going to have to put another normal arm back on the left side Or as you started off, go to some form of link arrangement. You say that it is difficult to fit a 4 link in , presume this is due to it being difficult to get enough angle between the top links for sideways restraint,...
- Thu Jun 23, 2016 5:30 pm
- Forum: Drivetrain / Suspension
- Topic: Fox Shocks / Coilovers
- Replies: 15
- Views: 8173
Re: Fox Shocks / Coilovers
Hi, I know this thread is a little bit old but I noticed that you seem to be running your Bilstiens upside down, usually the body is at the top and the shaft at the bottom
Cheers
Tim
Cheers
Tim
- Tue Apr 26, 2016 10:26 am
- Forum: Planning a trip?
- Topic: Maratoto wires loop. Sunday 3rd april
- Replies: 16
- Views: 6477
Re: Maratoto wires loop. Sunday 3rd april
Just got a price from BNT, $102 incl GST, just a bare unit.
Might get a few of the LowRange ones in my shipment, including the fitting adapters, getting some manual ones as well so don't require power to keep them on.
Cheers
Tim
Might get a few of the LowRange ones in my shipment, including the fitting adapters, getting some manual ones as well so don't require power to keep them on.
Cheers
Tim
- Mon Apr 25, 2016 10:10 pm
- Forum: Projects / Mod's
- Topic: Yellow V8 Zuk Evolution
- Replies: 0
- Views: 1242
Yellow V8 Zuk Evolution
First a bit of History and then will update as I go. Want to try and keep the thread reasonably clean, proper discussion is fine, just rather not have a bunch of general chit chat. So here we go. Decided I need a truck I could use off road trips and for some Winch challenges without to much work, ie...
- Mon Apr 25, 2016 9:37 am
- Forum: Planning a trip?
- Topic: Maratoto wires loop. Sunday 3rd april
- Replies: 16
- Views: 6477
Re: Maratoto wires loop. Sunday 3rd april
Hi, do they stay locked even with the power off after they have been activated, do they then release when you put your foot on the brake like the manual ones do.
Cheers
Tim
Cheers
Tim
- Mon Apr 11, 2016 1:12 pm
- Forum: Petrol Engines and Modifications
- Topic: Exhaust Manifold Replacement VP Commie V8
- Replies: 2
- Views: 3681
Exhaust Manifold Replacement VP Commie V8
Hi, After some advice / info Need to replace the manifolds on the VP Commie V8 that are in my Zuk, both are currently cast ones and cracked hence the replacement. Firstly, is there any performance requirement to have both sides connected either by being 2 into 1 or by having some sort of cross over ...
- Sun Apr 10, 2016 11:39 pm
- Forum: Events
- Topic: 2016 KIWI MARSHALLS
- Replies: 11
- Views: 9437
Re: 2016 KIWI MARSHALLS
How do we enter as keen to do so.
Cheers
Tim
Cheers
Tim
- Tue Apr 05, 2016 8:15 am
- Forum: Nissan
- Topic: Saf sprite steerng box
- Replies: 31
- Views: 7998
Re: Saf sprite steerng box
Have a look at
http://www.lowrangeoffroad.com/hydro-assist-ram-kit-by-trail-gear.html
and, note this is for a toyota box
http://board.marlincrawler.com/index.php?topic=10579.0
note that I have got a couple of kits
Cheers
Tim
http://www.lowrangeoffroad.com/hydro-assist-ram-kit-by-trail-gear.html
and, note this is for a toyota box
http://board.marlincrawler.com/index.php?topic=10579.0
note that I have got a couple of kits
Cheers
Tim
- Tue Apr 05, 2016 7:54 am
- Forum: Nissan
- Topic: Saf sprite steerng box
- Replies: 31
- Views: 7998
Re: Saf sprite steerng box
Hydraulic puller, some quick heat and a hammer to shock it.
If not going to hydro steer, possibly fit hydro assist, how much travel does your tie rod and drag link have.
Cheers
Tim
If not going to hydro steer, possibly fit hydro assist, how much travel does your tie rod and drag link have.
Cheers
Tim
- Fri Mar 11, 2016 1:09 pm
- Forum: Events
- Topic: Winch Challenges Coming up in the N I ??
- Replies: 29
- Views: 20455
Re: Winch Challenges Coming up in the N I ?? for 2016
Hi,
Is anyone able to fill in the dates or even if you know if they are likely to happen or not.
Thanks
Cheers
Tim
Is anyone able to fill in the dates or even if you know if they are likely to happen or not.
Thanks
Cheers
Tim