Offroad-Express

waza4x4toy

Hi looking for a spare to match 32x10x15 hankook dynapro 50%to100% tread depth would be great.
Auckland area preferably but will arrange freight pick where possible.

waza4x4toy

Hi i have used NZ post youshop and buy on amazon for freight free in US usually 22 bucks postage or see this guy http://www.trademe.co.nz/motors/car-parts-accessories/parts-other-makes/diffs-axles/auction-767177345.htm Or try this guy http://www.offroadspecialties.co.nz/node/319 cheers waza

waza4x4toy

Check out Off Road Secialites pricing their basic lifts are 1100 new so would give you some comparison, I sold similar for about 450 on a zero reserve auction so trade me might be your answer

waza4x4toy

Check out 4wdbits I just bought 15x8 I went with -19 offset but wish I had of done -10 so I did not have to chop guards as much as really changes lock width back into guards.
see
http://www.4wdbits.co.nz/ProductsList.aspx?CategoryID=17

waza4x4toy

Charge both separately on a good three or 7 stage charger set to calcium if they are calcium, you cant charge a calcium battery enough if its flat or they have become unequal as a pair using vehicle alternator they need to be charge equalized to get them both up a personal rule of thumb is don't mix...

waza4x4toy

Found this link to USA Jeep Forum.com that gives info on stock upgrade parts from other models. Made for an interesting read for you XJ Jeep builders. http://www.jeepforum.com/forum/f11/budget-builds-what-junkyard-parts-will-fit-xj-847303/ sorry can get these links to paste in properly try this belo...

waza4x4toy

Hi should try welding a jeep the panel steel is not like the cans your jappa is made of Caleb may be that's the problem :D :D :D check out this nz you tuber he has about a dozen great panel and welding clips See this one on welding panel [url]http://m.youtube.com/watch?v=zdsOGDzuIps&desktop_uri=...

waza4x4toy

Im assuming CB has power and the display is tuning. if so then aerial might have a short, check the aerail has no shorts, meaning when the aerial cable is removed from the CB, the centre wire to the antenna is not shorted to the outer, need to check with mulitmeter on ohms test. should be 0 ohms/ no...

waza4x4toy

Bringing in a kit is an option, rare to find one on trade me, Off road specialities in whangarei have good options and fair pricing http://www.offroadspecialties.co.nz I have a 3.5 inch and run 32s however you will need to replace wheels with better offset also or have issues with 8in rubber catchin...

waza4x4toy

giving it a bump to remind everyone its on this weekend

waza4x4toy

Hi cant disagree with any of the points listed here Info i can add is while googling other front diff stuff on USA forums for my XJ last night read several posts saying main hub Ball joint wear causes the "jeep death wobble" I just happened to pull my track bar out last week and found the ...

waza4x4toy

There is a guy based in Hahei coromandel who has been mentioned here on ORE (cant find his details ) who has these or can import them like ORS. Or ask this guy on trade me he has bits for jeeps http://www.trademe.co.nz/Browse/Listing.aspx?id=638664271 http://www.trademe.co.nz/Browse/Listing.aspx?id=...

waza4x4toy

Hi wanting some bits from Off Road Specialties in Northland but there site has been off line for a week or so does anyone have a phone number please? cheers waza

waza4x4toy

I appreciate you got all the falcon bits but i have seen lots of links on the Grand Cherokee conversions to XJ so would be similar to a TJ i assume and these mod in well from the looks of the forums with some tight clearances but not that tight. I think info suggests that after market rims with bigg...

waza4x4toy

still looking if anyone knows of some out there

waza4x4toy

yep ta Yeti understand the joining skins issue and will be careful to avoid cutting open the rear in the process!

waza4x4toy

Great thanks for link this looks to be one of the better how to links I have seen so appreciate the reply Jeep been parked up for a while as have other jobs on so have started back on this and will see how it turns out, did like the TJ flare fitments I have seen driving around here in Auckland and o...

waza4x4toy

This is titled "the most spectacular river crossing" not sure that explains it!

http://www.youtube.com/watch?v=LC5ld79joIA

waza4x4toy

Looking for a set of cheap flares off a TJ front, rears also if available. Just the standard width black ABS plastic style not colour matched ones.

Want to fit to an XJ like this example http://www.cherokeeforum.com/f67/tj-flares-xj-110465/

waza4x4toy

Hi still looking for some second hand aftermarket Jeep rims for my XJ Cherokee with some offset for wider tyres if anyone has got some sitting around

Steel type 15x8 with 3.75 to 4in or 0 to -19 offset

114.5x 5 stud pattern

cheers waza

waza4x4toy

Hi would anyone have any suggestions of a friendly north shore/Auckland steel fabricator who could repair/strengthen front control arm mounts on jeep diff. Need some slight repair and protection made.

waza4x4toy

Thanks probably to shiny for me, looking at new steels at moment trying some offsets and trying to minimise the guard chop

waza4x4toy

Hi still looking for some aftermarket Jeep rims for my XJ Cherokee with some offset for wider tyres (32x11.5x15)

15x8 114.5x 5 stud pattern

Thinking i need 4in offset. so 4in from inside rim down into rim mounting centre which is -12 to -19 offset.

waza4x4toy

still looking!

waza4x4toy

Thanks for info so far and considering all options if anyone has a XJ in auckland that has chopped guards would be great to see it for further advice.

waza4x4toy

Ok still looking for rims if anything out there

waza4x4toy

Ok need advise im going to 32x12.5x15s on an 95 XJ, no going back now just going to do it and make it work. My regret, could have been a lots easier going to 31s but after having to be dragged on my diffs so many times of late with my current 30x9.5x15, i wanted to go bigger....seems to be common st...

waza4x4toy

Thanks will have a look Was hoping to get some second hand in good condtion. Bought a set at good price on Trademe recenlty and i think the guy did the dirty on me and sold them to someone who phone him direclty prior as he suddenly didnt have them when i arranged to collect them. just missed out on...

waza4x4toy

Hi looking for some aftermarket Jeep rims for my XJ Cherokee with some offset for wider tyres (32x11.5x15)
15x8 Thinking i need 4in offset. so 4in from inside rim down into rim centre

114.5x 5 stud pattern

Any help or suggestions would be appreciated

waza4x4toy

Same, looking forward to somewhere to play again. Hopefully we (NWOHV) can get the cancelled night run up and running again soon also.

Search found 69 matches

WTB 32x10x15 or 32x11x15 spare

Re: Overseas jeep parts

Re: Lifted Jeep Cherokee, whats this gear worth?

Re: WTD: 15x8 Black Steel Rims 5x114.3 & 35 MT/s

Re: safari dual battery help needed

Great Link for Jeep XJ common parts upgrades

Re: Help Needed Apply Within...

Re: newby cb install issues

Re: lifting jeep

Re: Night Run November

Re: Death Wobble

Re: Track Bar for XJ

Ph # for Off Road specialties?

Re: Rear Disk Brakes on a TJ Wrangler

Re: Wanted to Buy Jeep TJ flares standard black plastic

Re: XJ Guard Cut / flares on a tightish budget

Re: XJ Guard Cut / flares on a tightish budget

Re: fail videos on youtube

Wanted to Buy Jeep TJ flares standard black plastic

WTB Jeep Rims 15x 8 aftermarket

Suggestions for steel/diff fabricaters Nth auckland

Re: WTB Jeep Rims, aftermarket, 15x8 with offset

Re: WTB Jeep Rims, aftermarket, 15x8 with offset

Re: WTB Jeep Rims, aftermarket, 15x8 with offset

Re: XJ Guard Cut / flares on a tightish budget

Re: WTB Jeep Rims, aftermarket, 15x8 with offset

XJ Guard Cut / flares on a tightish budget

Re: WTB Jeep Rims, aftermarket, 15x8 with offset

WTB Jeep Rims, aftermarket, 15x8 with offset

Re: Woodhill 4WD Park open again 6-7 April 2013