Can you guys sort this ASAP as someone will likely fall for it.
Search found 383 matches
- Wed Mar 09, 2016 1:24 pm
- Forum: Feedback
- Topic: Malicious private messages from Offroad Express member
- Replies: 1
- Views: 2957
- Wed Mar 02, 2016 2:21 pm
- Forum: Suzuki
- Topic: Will these wheels/tyrs fit my Escudo!?
- Replies: 4
- Views: 1250
Will these wheels/tyrs fit my Escudo!?
Hey!
Simple question, hoping there's a simple positive answer
1991 Suzuki Escudo Nomade (1600cc SOHC 16valve injected 4-door 5-spped manual LWB).
Will 30x9.5" mud tyres on 15x8 -18et wheels fit with NO lift?
Thanks
Simple question, hoping there's a simple positive answer
1991 Suzuki Escudo Nomade (1600cc SOHC 16valve injected 4-door 5-spped manual LWB).
Will 30x9.5" mud tyres on 15x8 -18et wheels fit with NO lift?
Thanks
- Wed Mar 02, 2016 1:13 pm
- Forum: Suzuki
- Topic: WTD: 1991 Suzuki Vitara/Escudo lift!
- Replies: 0
- Views: 832
WTD: 1991 Suzuki Vitara/Escudo lift!
Does anyone have a new or second hand lift for sale for a 1991 Escudo Nomade? 4-door IFS 1600cc SOHC 16-valve injected model.
Don't really mind if it's body, spring or spring spacers - depends on price and condition.
Not looking for anything over a 3" lift, prefer 2".
Cheers.
Don't really mind if it's body, spring or spring spacers - depends on price and condition.
Not looking for anything over a 3" lift, prefer 2".
Cheers.
- Wed Mar 02, 2016 12:12 pm
- Forum: Suzuki
- Topic: Will these spring spacers fit my Escudo?
- Replies: 4
- Views: 955
Re: Will these spring spacers fit my Escudo?
If your springs aren't tapered it shouldn't matter where you measure them. Pretty certain the suspension is the same By eye they don't appear to be tapered, but looking from the angles I need to it is hard to tell. That's why I wanted to measure to be sure, which I can't do without taking the sprin...
- Wed Mar 02, 2016 11:58 am
- Forum: Suzuki
- Topic: Will these spring spacers fit my Escudo?
- Replies: 4
- Views: 955
Re: Will these spring spacers fit my Escudo?
Should do. I think I bought the same for my Vitara. Should be plenty of room to get a tape in there and measure your springs Na man my phone barely fits in there :twisted: I can measure the diameter about half way up fine, but top is impossible due to bump stop (with a tape measure, all I have hand...
- Wed Mar 02, 2016 11:43 am
- Forum: Suzuki
- Topic: Will these spring spacers fit my Escudo?
- Replies: 4
- Views: 955
Will these spring spacers fit my Escudo?
Hey guys :) I have just picked up a little 1991 Suzuki Escudo Nomade as a wee beach/bush hack! Have owned plenty of 4x4's in the past so not a newbie to that, but definitely a newbie to anything Suzuki! The engine is a 1600cc SOHC 16 valve injected engine and a 5 speed manual gearbox. It is a 4-door...
- Tue Jun 23, 2015 7:51 am
- Forum: 4WD Parts
- Topic: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
- Replies: 27
- Views: 6558
Re: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?
Have had offroad trucks before so the lift is obvious, it's the wheel stud pattern issues I'm wanting information on I'm getting a 3" suspension lift in the Navara Correct the 10" wheels will have a -44 offset, same as on my Surf at the moment Might wait for the Navara to arrive then go fi...
- Mon Jun 22, 2015 5:16 pm
- Forum: 4WD Parts
- Topic: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
- Replies: 27
- Views: 6558
Re: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?
http://www.trademe.co.nz/motors/car-parts-accessories/nissan/accessories/auction-903881506.htm Cheers bud have emailed the steel surgeon will await his response Checked out the tardme listing - can source way cheaper by importing them but with the smaller center bore does that matter if the wheel I...
- Mon Jun 22, 2015 4:35 pm
- Forum: 4WD Parts
- Topic: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
- Replies: 27
- Views: 6558
Re: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?
Where are you located, have you thought about trying a wheel repair place that does steelies? they might be able to come up with something as they flip centers as a normal thing, in Christchurch we have royce clive and elite wheels that i know of Hey, located in Auckland. Oh ok hadn't thought of th...
- Mon Jun 22, 2015 3:00 pm
- Forum: 4WD Parts
- Topic: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
- Replies: 27
- Views: 6558
Re: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?
churchill wrote:Chinese but they have them by the looks of it.
http://www.china4x4offroad.com/product_largerimage.asp?id=7447
Hah they do too! Only 8" wide though, and shipping would be crazy. Hmm
- Mon Jun 22, 2015 9:19 am
- Forum: Nissan
- Topic: 16x10" steel 4x4 wheels for a 2014 Nissan Navara (6x114.3)
- Replies: 1
- Views: 571
Re: 16x10" steel 4x4 wheels for a 2014 Nissan Navara (6x114.
Can be deleted
- Mon Jun 22, 2015 9:18 am
- Forum: 4WD Parts
- Topic: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
- Replies: 27
- Views: 6558
Re: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?
that's a yank pattern, Ford/hennessey Raptor, Dodge viper/durango/Dakota,Toyota tundra/tacoma all run that pattern, Pretty much all japanese car makers that sell trucks in the continental north america ........something to do with US saftey standards for vehicle's that fall into certain parameters ...
- Thu Jun 18, 2015 1:03 pm
- Forum: 4WD Parts
- Topic: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
- Replies: 27
- Views: 6558
Re: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?
jeffw wrote:Maybe they've changed them then, I know of a guy that had an st and an stx that couldn't swap rims between due to stud pattern
The first I heard of it was since 2005 all Navara's went to an odd-ball stud pattern of 6x114.3
The guy you know, what years are his ST and STX?
- Thu Jun 18, 2015 10:17 am
- Forum: 4WD Parts
- Topic: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
- Replies: 27
- Views: 6558
Re: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?
Oh - that'd be sweet then if the ST-X has 6x114.3 and the ST has 6x137.9 Is anyone able to confirm this? Cheers Only the stx had that stud pattern, the non stx navaras are normal I've just called Nissan and although they couldn't tell me what the stud pattern(s) is/are, they said that the ST and ST...
- Thu Jun 18, 2015 9:44 am
- Forum: 4WD Parts
- Topic: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
- Replies: 27
- Views: 6558
Re: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?
jeffw wrote:Only the stx had that stud pattern, the non stx navaras are normal, hubs might be interchangeable?? Otherwise importing wheels my be the way to go
Oh - that'd be sweet then if the ST-X has 6x114.3 and the ST has 6x137.9
Is anyone able to confirm this?
Cheers
- Thu Jun 18, 2015 9:38 am
- Forum: 4WD Parts
- Topic: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
- Replies: 27
- Views: 6558
Re: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?
jeffw wrote:Only the Stx navara had them, might have to look at aussy
Hey jeff, not sure what you're meaning?? The ST-X Navara had what?
I'm after somewhere that sells 16x10 black steel 4x4 wheels but in the 6x114.3 stud pattern
Cheers
- Thu Jun 18, 2015 8:22 am
- Forum: Nissan
- Topic: 16x10" steel 4x4 wheels for a 2014 Nissan Navara (6x114.3)
- Replies: 1
- Views: 571
16x10" steel 4x4 wheels for a 2014 Nissan Navara (6x114.3)
As the title says does anyone know if these are out there and where to find them?
Don't want to go the route of re-drilling or spacer adapters to change the pattern if I don't have to
Any help much appreciated
Cheers
Don't want to go the route of re-drilling or spacer adapters to change the pattern if I don't have to
Any help much appreciated
Cheers
- Thu Jun 18, 2015 8:00 am
- Forum: 4WD Parts
- Topic: 16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
- Replies: 27
- Views: 6558
16x10" 6x114.3 4x4 steel wheels - WHERE DO I FIND THESE?!?
Hey guys So, have a new Navara on the way (2014, 4wd ST). Wanting to chuck some big muddies on it like my current Surf (15x10" 33x12.5") but I've just found out since 2005 the Navara's do an odd-ball stud pattern (typical) of 6x114.3 not the usual 6x137.9 (or 139.7? Can't remember now!) Th...
- Mon Jun 09, 2014 5:25 pm
- Forum: Toyota
- Topic: Spungy brakes after turning right?
- Replies: 10
- Views: 1167
Re: Spungy brakes after turning right?
slidenyo wrote:does it have abs?
did you follow factory bleeding procedure?
if the line was kinked take it back for them to replace they always end up splitting after that treatment
No ABS
Yea normal bleeding
Haven't had time to check the back and forth play yet been flat out
- Fri Jun 06, 2014 4:27 pm
- Forum: Toyota
- Topic: Spungy brakes after turning right?
- Replies: 10
- Views: 1167
Re: Spungy brakes after turning right?
Oh ok same as checking for a shitted wheel bearing. Will have a look this weekend. Cheers.
PS it also brakes to the right now, really noticeable when rolling slowly and braking.
PS it also brakes to the right now, really noticeable when rolling slowly and braking.
- Thu Jun 05, 2014 6:16 pm
- Forum: Toyota
- Topic: Spungy brakes after turning right?
- Replies: 10
- Views: 1167
Re: Spungy brakes after turning right?
The metal part of the brake line was twisted and not routed correctly when I got the truck back, I had to take the caliper off and attempt to bend and re-route it correctly (with not complete success, although it's a lot better and closely resembles the other side now). Also bled the brakes via that...
- Wed Jun 04, 2014 6:34 pm
- Forum: Toyota
- Topic: Spungy brakes after turning right?
- Replies: 10
- Views: 1167
Spungy brakes after turning right?
1995 KZN130 Surf Recently had wheel bearing replaced Brakes were bled off front right when re-assembled Now, after turning right, the brake peddle depresses a lot further than before, enough to give you a bit of a fright sometimes when needing to stop suddenly. Some occasions worse than others. Afte...
- Wed May 07, 2014 6:04 pm
- Forum: Toyota
- Topic: Can you limp a Surf home with front drivers side axle out?
- Replies: 12
- Views: 1447
Re: Can you limp a Surf home with front drivers side axle ou
After all that it's thrown a wheel bearing, real bad, so it'll be staying put tonight
Good to know the axle can just come out and truck still be driven though
Cheers
Good to know the axle can just come out and truck still be driven though
Cheers
- Wed May 07, 2014 2:03 pm
- Forum: Toyota
- Topic: Can you limp a Surf home with front drivers side axle out?
- Replies: 12
- Views: 1447
Re: Can you limp a Surf home with front drivers side axle ou
Mehrts wrote:The CV assembly is attached to the diff flanges by 6 threaded studs and nuts, so you don't have to deal with the diff at all when removing these on an IFS (non solid front) Surf or Hilux.
Yep does this flange on the diff need to be removed though or can the axle just be pulled out?
- Wed May 07, 2014 1:30 pm
- Forum: Toyota
- Topic: Can you limp a Surf home with front drivers side axle out?
- Replies: 12
- Views: 1447
Re: Can you limp a Surf home with front drivers side axle ou
zukmeista wrote:Not sure, depends if C.V. bolts to flange on diff or end of axle slides in.
Yea not too sure - it's a KZN130, '95 or '94 can't remember but one of the two, does anyone else know what needs to be taken out and drained or what the story is to limp it home without the front right axle?
- Wed May 07, 2014 12:30 pm
- Forum: Toyota
- Topic: Can you limp a Surf home with front drivers side axle out?
- Replies: 12
- Views: 1447
Re: Can you limp a Surf home with front drivers side axle ou
I think he's got the same issue I had a few weeks back, from the sounds of it his CV has shat itself. He said it's making narly noises front right side and the axle can slide back and forth about 10-15mm (estimate). Has a "binding metallic loose metal noise" he said. Sounds like the bearin...
- Wed May 07, 2014 11:22 am
- Forum: Toyota
- Topic: Can you limp a Surf home with front drivers side axle out?
- Replies: 12
- Views: 1447
Can you limp a Surf home with front drivers side axle out?
Can you (slowly) drive a KZN130 Surf with the drivers side front axle removed completely? Mate needs to limp his Surf home - I'm under the impression you should be able to drive it with it removed but can anyone here give a definitive answer?
Thank you
Thank you
- Tue May 06, 2014 10:29 am
- Forum: Toyota
- Topic: surf kzn130 rim offset
- Replies: 25
- Views: 7238
- Tue May 06, 2014 8:56 am
- Forum: Toyota
- Topic: 1KZ-TE starting like a pig
- Replies: 11
- Views: 4578
Re: 1KZ-TE starting like a pig
Thanks evolution02 and Jay!
slide, care to elaborate?
slide, care to elaborate?
- Mon May 05, 2014 8:33 pm
- Forum: Toyota
- Topic: surf kzn130 rim offset
- Replies: 25
- Views: 7238