Search found 574 matches

by ChurchurDan
Sun Aug 27, 2017 6:40 pm
Forum: Nissan
Topic: Advice on 3.2 Regulus
Replies: 3
Views: 1368

Re: Advice on 3.2 Regulus

The terrano tow bar should be the same. They do have 2 different tow bars one with wheel under and one with the tyre on the back.
by ChurchurDan
Fri May 05, 2017 7:45 pm
Forum: Toyota
Topic: HZJ105 from AU
Replies: 2
Views: 1109

Re: HZJ105 from AU

An MC class (4wd) vehicle imported into New Zealand on or after 1 March 2016 must be fitted with an electronic stability control (ESC) system unless: it is over 20 years old it is a special interest vehicle you’re bringing it with you when emigrating or returning to live in New Zealand. That is off ...
by ChurchurDan
Fri Apr 21, 2017 10:29 pm
Forum: Toyota
Topic: 80 Series Swivel housing rear seal - Greasing leaking onto ball
Replies: 9
Views: 1783

Re: 80 Series Swivel housing rear seal - Greasing leaking onto ball

Usually when they are leaking it is the inner axle oil seal leaking diff oil into the swivel ball diluting the grease. Personally I would strip and inspect it just to check.
by ChurchurDan
Thu Mar 09, 2017 8:07 pm
Forum: Nissan
Topic: D21 Navara td27 n/a Power Issues!
Replies: 5
Views: 1818

Re: D21 Navara td27 n/a Power Issues!

I drove a 2wd D21 N/a td27 for work and it wouldn't do 100k's into a strong headwind. Turbo conversion fixed that.
by ChurchurDan
Wed Jan 11, 2017 9:20 pm
Forum: Tool Shed
Topic: Hilux SAS cert
Replies: 3
Views: 1288

Re: Hilux SAS cert

The easiest option for you is to get the current owner to cert it on the agreement you will purchase it once the cert is done.
2nd option is to get it inspected by a certifier to find out what needs to be done to get cert before you agree on a price.
by ChurchurDan
Wed Nov 30, 2016 9:16 pm
Forum: Tool Shed
Topic: Brakes and fluid
Replies: 6
Views: 1732

Re: Brakes and fluid

What bits are getting rusty? If it is wheel cylinders or calipers get the resleeved in stainless.
I think you would find the boiling point of anti freeze to be to low and even moderate used would cause bad brake fade.
by ChurchurDan
Mon Sep 05, 2016 6:17 pm
Forum: Drivetrain / Suspension
Topic: 80 Series Lockers
Replies: 13
Views: 6488

Re: 80 Series Lockers

You wont get any power to the plug with it disconnected. It needs to be plugged in for the controller to get a circuit through the limit switches.
by ChurchurDan
Sun Jun 12, 2016 6:59 pm
Forum: Nissan
Topic: Vg30e computer
Replies: 2
Views: 946

Re: Vg30e computer

its for self diagnostics
by ChurchurDan
Wed Apr 13, 2016 7:21 pm
Forum: Nissan
Topic: QD32 into WD21 questions
Replies: 24
Views: 9223

Re: QD32 into WD21 questions

If you keep your auto get a factory turbo motor and just change your pump over. The ETi motors and later D22 Qd32 have the gear driven vac pump and this is a good thing as you have much more options with alternators. If you plan to go manual get a motor and box from a D22 and put your pump and turbo...
by ChurchurDan
Tue Apr 12, 2016 6:36 pm
Forum: Nissan
Topic: lower high range gears tx12
Replies: 8
Views: 2669

Re: lower high range gears tx12

Pete used the FS5R50 TD42 box, not the FS5R30 as used in petrol and rd28 powered patrols.
by ChurchurDan
Mon Apr 11, 2016 7:09 pm
Forum: Nissan
Topic: lower high range gears tx12
Replies: 8
Views: 2669

Re: lower high range gears tx12

Get in touch with Jeremy as Im sure he looked into a twin nissan transfer setup.
The safari box has nothing in common with a skyline box as it is truck based, you could possibly look into a gear set out of a Civillian or Atlas if you could find info on the ratios in them.
by ChurchurDan
Mon Mar 28, 2016 6:24 am
Forum: 4wd Safety
Topic: Side Airbags
Replies: 7
Views: 4599

Re: Side Airbags

When the curtain bags deploy they come down between the passengers head and the side window, so if you have cutouts that start at the top edge of the seat back and the outside edge of the headrest there should be no impairment to the bag deploying or anything to alter its course. If you put a net in...
by ChurchurDan
Sun Mar 27, 2016 1:41 pm
Forum: Nissan
Topic: Small noisy 12V horn inside the cabin???? 94 Nissan Homy
Replies: 9
Views: 3192

Re: Small noisy 12V horn inside the cabin???? 94 Nissan Homy

Only other option could be a low water level alarm but I have never seen one factory fitted to a nissan van. I still think vacuum is the most likely culprit. Some where around the engine will be a vacuum switch and the little hose going to it may be split of broken and have been disturbed while doin...
by ChurchurDan
Sat Mar 26, 2016 10:03 pm
Forum: Nissan
Topic: Terrano headlights have stopped working
Replies: 4
Views: 2246

Re: Terrano headlights have stopped working

Those short pieces of green orange and black wire are the fuse links.
by ChurchurDan
Sat Mar 26, 2016 10:01 pm
Forum: Nissan
Topic: Small noisy 12V horn inside the cabin???? 94 Nissan Homy
Replies: 9
Views: 3192

Re: Small noisy 12V horn inside the cabin???? 94 Nissan Homy

Could be a low vacuum warning. If so it will have the hand brake light on at the same time with the hand brake off.
by ChurchurDan
Sat Mar 26, 2016 11:22 am
Forum: 4wd Safety
Topic: Side Airbags
Replies: 7
Views: 4599

Re: Side Airbags

Could you use a net instead of a solid barrier? If done well it would prevent groceries in the back off the head and still be able to deform to allow side airbag deployment.
by ChurchurDan
Fri Mar 25, 2016 12:04 pm
Forum: Tool Shed
Topic: Strong "Sealant" for windscreen
Replies: 11
Views: 2466

Re: Strong "Sealant" for windscreen

We use urethane at work to glue solar panels on to camper vans, once cured you could pick the camper up by the panel.
We use the Wurth one as they do it in white, most glass places will only have black.
by ChurchurDan
Fri Mar 25, 2016 8:41 am
Forum: Nissan
Topic: Terrano headlights have stopped working
Replies: 4
Views: 2246

Re: Terrano headlights have stopped working

D21 Terranos don't have factory relays for the head lights, they are direct from the switch to the lights. Do you get power to the headlight fuses with the switch on, the 2 for low will get power with the switch on and in the low position and the same for the high fuses. If it has had relays added t...
by ChurchurDan
Wed Mar 16, 2016 7:03 pm
Forum: Nissan
Topic: D21 Terrano troubles. Is it dead?
Replies: 25
Views: 5623

Re: D21 Terrano troubles. Is it dead?

Often when they wear the shaft they suck engine oil through the pump and your diesel will get darker. You would notice when you change the filter.
by ChurchurDan
Wed Mar 16, 2016 6:59 pm
Forum: Nissan
Topic: TD27 Nissan Van overheating on hills, otherwise fine - HELP!
Replies: 18
Views: 8611

Re: TD27 Nissan Van overheating on hills, otherwise fine - H

My old D21 used to get well over half on the gauge when pointed up a long steep hill on a hot day and when the viscous hub locked up it nearly died, 2nd and 3rd where the norm for hill work. Sounds pretty much like what happened to me, Dan. What did you end up doing (other than not going up hills a...
by ChurchurDan
Tue Mar 15, 2016 7:03 pm
Forum: Nissan
Topic: TD27 Nissan Van overheating on hills, otherwise fine - HELP!
Replies: 18
Views: 8611

Re: TD27 Nissan Van overheating on hills, otherwise fine - H

My old D21 used to get well over half on the gauge when pointed up a long steep hill on a hot day and when the viscous hub locked up it nearly died, 2nd and 3rd where the norm for hill work.
by ChurchurDan
Tue Mar 15, 2016 6:55 pm
Forum: Tool Shed
Topic: scan tool power
Replies: 31
Views: 5302

Re: scan tool power

3 and 6 are the contacts of the relay, bridging those should make it wind over. If it doesn't check you have power to either 3 or 6 and then that the power is getting to the starter with it bridged. The other 2 are the winding, one should be an earth and the other should come live with the key in th...
by ChurchurDan
Tue Mar 15, 2016 11:43 am
Forum: Nissan
Topic: 24v Saf alternator options?protect from mud?
Replies: 12
Views: 3050

Re: 24v Saf alternator options?protect from mud?

The part number for the 60 amp unit is LR260-502 or LR260-504 and is found on NPR and NKR trucks with 4HF1, 4HG1 and 4HJ1 engines. There is also a listing for an 80 amp unit that is for the later 4HJ1 and 4HK1 engines.
by ChurchurDan
Tue Mar 15, 2016 11:33 am
Forum: Tool Shed
Topic: scan tool power
Replies: 31
Views: 5302

Re: scan tool power

Im sure it is in the under bonnet relay and fuse box and is labeled start.
by ChurchurDan
Mon Mar 14, 2016 8:33 pm
Forum: Tool Shed
Topic: scan tool power
Replies: 31
Views: 5302

Re: scan tool power

The injectors shouldn't change anything. I would check to see if you are getting power to the little wire on the starter when the key is turned to start. The start feed enters the engine harness from the connector close to the battery where the loom comes from the engine to the body and will be eith...
by ChurchurDan
Sat Mar 12, 2016 8:39 pm
Forum: Tool Shed
Topic: scan tool power
Replies: 31
Views: 5302

Re: scan tool power

Is the engine turning over?
by ChurchurDan
Sat Mar 12, 2016 12:16 pm
Forum: Toyota
Topic: LN106 hilux steering issue
Replies: 25
Views: 10146

Re: LN106 hilux steering issue

If you want to increase positive castor( this is needed for the steering to self center and go in a straight line) you want to roll the diff rearward so the wedges will have the thick end to the front.
by ChurchurDan
Sat Mar 12, 2016 12:11 pm
Forum: Tool Shed
Topic: scan tool power
Replies: 31
Views: 5302

Re: scan tool power

22 pin plug is not powered and is flash code plus some live data, our scan tool we use on these has an internal battery. You bridge terminals to flash the check light for the system you are working on.
What are you trying to get info out of?
by ChurchurDan
Sat Mar 12, 2016 6:29 am
Forum: Jeep
Topic: JEEP WRANGLER TRAILCAT
Replies: 3
Views: 3050

Re: JEEP WRANGLER TRAILCAT

Chrysler have a few concept 4wd's out right now and most of them look decent.
http://expeditionportal.com/mopars-newe ... s-to-come/
by ChurchurDan
Fri Mar 11, 2016 4:52 pm
Forum: Nissan
Topic: 24v Saf alternator options?protect from mud?
Replies: 12
Views: 3050

Re: 24v Saf alternator options?protect from mud?

Engine importers are a good place to start.
On monday I will dig one out I have at work and list up the part numbers and which engine they are off of.

Go to advanced search