Search found 198 matches

by Sausager
Thu Feb 01, 2018 6:56 am
Forum: Toyota
Topic: what chassis can go under a ln106?
Replies: 6
Views: 491

Re: what chassis can go under a ln106?

kbushnz wrote:I have seen a hilux cab under a swb Prado chassis...


Had someone rolled it? :lol:
by Sausager
Tue Oct 03, 2017 12:43 pm
Forum: Projects / Mod's
Topic: new 1uz gen1 project
Replies: 23
Views: 2157

Re: new 1uz gen1 project

Cool build mate, love it!
by Sausager
Tue Sep 19, 2017 9:39 am
Forum: Projects / Mod's
Topic: X5 Project.
Replies: 95
Views: 5304

Re: X5 Project.

I tell you, you're going to be in the most comfort of anyone out on the tracks haha :D

Cool build man. Go get it muddy!
by Sausager
Wed Sep 13, 2017 9:54 pm
Forum: Drivetrain / Suspension
Topic: prado/surf SAS 4" lift custom radius arms
Replies: 19
Views: 1224

Re: prado/surf SAS 4" lift custom radius arms

I don't see why these would be hard at all. Do they have to be one piece, or can they be fabricated?
by Sausager
Sat Sep 02, 2017 11:29 pm
Forum: Nissan
Topic: advice on buying a nissan mistral 2.7 diesel
Replies: 10
Views: 594

Re: advice on buying a nissan mistral 2.7 diesel

philip121 wrote:I don't want a digital speedo


Why not?
by Sausager
Tue Aug 22, 2017 7:08 am
Forum: Suzuki
Topic: SJ413 diff swap to Vitara
Replies: 3
Views: 424

Re: SJ413 diff swap to Vitara

Some of the vitara diffs are 26 spline and so are a direct fit. But you'll just end up breaking the aluminium housing, so swapping the ring and pinion over is the go.

Have a read here: http://suzukiclubuk.co.uk/diy/16-transm ... conversion
by Sausager
Thu Aug 17, 2017 9:27 pm
Forum: Suzuki
Topic: Rusty the SJ413
Replies: 51
Views: 5175

Re: Rusty the SJ413

One is the temp sender the other should be a temp switch for the AC fan One should short to ground at a certain temp the other should change impedance ( decrease ohms ) as the temperature rises. From memory the vitae's uses a different impedance range to the SJ and most use the SJ sender to get ful...
by Sausager
Wed Aug 16, 2017 4:14 pm
Forum: Suzuki
Topic: Rusty the SJ413
Replies: 51
Views: 5175

Re: Rusty the SJ413

This is what I have done with my temp sender https://farm5.staticflickr.com/4357/36553987546_c2114274c4_c.jpg The gauge sender is on the RH side of the pic. There was a really crappy connector thing stuck on the end of that little 'stick' that just hung there limply. Not a good connection. So I trie...
by Sausager
Tue Aug 15, 2017 8:29 pm
Forum: Suzuki
Topic: Rusty the SJ413
Replies: 51
Views: 5175

Re: Rusty the SJ413

I've got a bit more done. First, I added some gussets to strengthen the rear tube with the tow hook on it. https://farm5.staticflickr.com/4415/36318084451_4fb632551e_c.jpg I've got the rear bar and tray done! https://farm5.staticflickr.com/4263/34958727623_cbfe04da4b_c.jpg https://farm5.staticflickr...
by Sausager
Mon Aug 07, 2017 10:27 am
Forum: Land Access / DOC legislation / Regulations
Topic: Farm land usage for 4wd events
Replies: 13
Views: 1172

Re: Farm land usage for 4wd events

I can't believe that in the world we live in you can't simply invite your mates around for a hack in the mud without thinking about this sort of thing!
by Sausager
Mon Jul 24, 2017 9:10 pm
Forum: Projects / Mod's
Topic: Suzuki Build
Replies: 24
Views: 1088

Re: Suzuki Build

Well I'm glad you didn't :)

What's your plan for here on in? What's left to be finished?
by Sausager
Mon Jul 24, 2017 8:20 am
Forum: Projects / Mod's
Topic: Suzuki Build
Replies: 24
Views: 1088

Re: Suzuki Build

This looks awesome dude, well done. Keep it up!

Don't part it out now... :(
by Sausager
Tue Jul 11, 2017 7:26 am
Forum: Feedback
Topic: Photo bucket plus 500
Replies: 9
Views: 1006

Re: Photo bucket plus 500

Flickr is awesome. And the app on your phone can/will automatically upload all pictures online. Then link form there. Easy
by Sausager
Thu Jul 06, 2017 4:00 pm
Forum: Suzuki
Topic: Rusty the SJ413
Replies: 51
Views: 5175

Re: Rusty the SJ413

The plan is to weld some decent gussets from the tube to the chassis rails to stop that from happening.

It sounds like you know from experience?!
by Sausager
Thu Jul 06, 2017 9:04 am
Forum: Suzuki
Topic: Rusty the SJ413
Replies: 51
Views: 5175

Re: Rusty the SJ413

Phew, this hasn't been updated in a while... It wasn't running right, and I got that sorted. Turns out it was the throttle body after all that. Swapped it out for a good one and away I went. Then I found this crack, just to the left of the frost plug: https://farm1.staticflickr.com/701/32639840444_a...
by Sausager
Tue May 23, 2017 11:54 am
Forum: Trip Reports, Trail Reviews, Reports and Information
Topic: The Odlins Road thread
Replies: 17
Views: 2188

Re: The Odlins Road thread

Does anyone know anything about the track shown here heading west (left) from the summit of the Akatarawa Road (can see Odlin's heading out east/right)? It looks like it's a marked track on Google, and you can also make out a physical track too. https://c1.staticflickr.com/5/4186/34669294622_fdc08e2...
by Sausager
Sun Apr 02, 2017 1:05 pm
Forum: Projects / Mod's
Topic: Good photoshopper wanted
Replies: 9
Views: 1026

Re: Good photoshopper wanted

Talk to Josh here. He's absolutely incredible.

http://www.accidentaldesign.co.nz/
by Sausager
Fri Feb 24, 2017 7:39 pm
Forum: Suzuki
Topic: g16a running poorly, erratic idle, conversion issues
Replies: 3
Views: 392

Re: g16a running poorly, erratic idle, conversion issues

Cheers for the replies guys. I have checked the connection to the coolant temp ECU sender and that seems ok. No idea how to actually test it though? I have a CEL, and I get a code 12 which means no faults. I don't think I have an intake air temp sensor. Normally its on the airbox, but I didn't have ...
by Sausager
Fri Feb 24, 2017 12:55 pm
Forum: Suzuki
Topic: g16a running poorly, erratic idle, conversion issues
Replies: 3
Views: 392

g16a running poorly, erratic idle, conversion issues

Hey guys. I've recently put a 16v mpi g16a into my SJ413. Did everything myself, incl all wiring. I drove the car the motor came out of before pulling the motor out and the motor was fine. She started the first time I tried it after the conversion, no dramas there. On the first start, it idled high,...
by Sausager
Mon Feb 06, 2017 8:47 pm
Forum: Suzuki
Topic: Rusty the SJ413
Replies: 51
Views: 5175

Re: Rusty the SJ413

It's a good feeling when ya get them going, you say about your clutch what kind is it? just got mine going too (your diagram worked very well) and the clutch is slipping bad thought it could be the more power and need a heavy duty one. Apparently HD clutches are more hassle than they're worth break...
by Sausager
Thu Feb 02, 2017 1:26 pm
Forum: Suzuki
Topic: Rusty the SJ413
Replies: 51
Views: 5175

Re: Rusty the SJ413

Update time She runs and drives! So I got through the wiring and integrated it all without too much drama thanks to wiring diagrams, a few tips and hints from friends of mine (and also Facebook. Yes, I stooped that low :( ). Some of the wiring is still hanging down in the passenger footwell too. I’m...
by Sausager
Thu Feb 02, 2017 10:37 am
Forum: Suzuki
Topic: Rusty the SJ413
Replies: 51
Views: 5175

Re: Rusty the SJ413

Tumor wrote:Looks awesome, very well done on the work.
Have you got an update?


Cheers mate!

Yes, I do have an update. I just need a chance to get it typed out... I'll try for this avo :)
by Sausager
Mon Jan 02, 2017 7:16 am
Forum: 4WD Parts
Topic: WTB Vitara rear diff
Replies: 1
Views: 186

Re: WTB Vitara rear diff

I have one in Wellington if you get stuck
by Sausager
Thu Dec 01, 2016 1:24 pm
Forum: Suzuki
Topic: Rusty the SJ413
Replies: 51
Views: 5175

Re: Rusty the SJ413

I’ve started integrating my cut down loom into the SJ. Bleugh! https://c7.staticflickr.com/6/5441/31182361302_3d427b5d02_c.jpg I am learning things as I go: First is that while I was cutting the loom down I should have better planned what was going where Second is that I should have taped together s...
by Sausager
Wed Nov 30, 2016 8:02 am
Forum: Projects / Mod's
Topic: Suzuki SJ413 (whats left of one anyway)
Replies: 25
Views: 2188

Re: Suzuki SJ413 (whats left of one anyway)

Any updates on this? :D
by Sausager
Sun Nov 27, 2016 10:21 pm
Forum: Tool Shed
Topic: Turbo timer wiring
Replies: 5
Views: 480

Re: Turbo timer wiring

Cheers for the replies guys What's my solution? All wiring diagrams for installing TTs that I see online all seem to be a basic 3 or 4 wire install. I guess some TTs would have all of that sort of thing built in? Out of curiosity, what would happen in an auto if the motor switched off while travelli...
by Sausager
Sun Nov 27, 2016 1:52 pm
Forum: Tool Shed
Topic: Turbo timer wiring
Replies: 5
Views: 480

Re: Turbo timer wiring

Image

Blue, red, yellow and black wires coming out of the back of it.
by Sausager
Sun Nov 27, 2016 1:47 pm
Forum: Tool Shed
Topic: Turbo timer wiring
Replies: 5
Views: 480

Turbo timer wiring

Hey guys. I have recently bought a KZJ95w prado with the 1kz. It has a turbo timer installed, but doesn't seem to be working correctly. It has an "on/off" button on it which I figure is to choose whether or not to use to TT. If I turn it OFF while the car is running, then the motor will im...
by Sausager
Sun Nov 27, 2016 1:32 pm
Forum: Suzuki
Topic: (Slow) '87 SJ413 Build
Replies: 80
Views: 4082

Re: (Slow) '87 SJ413 Build

100% agree on narrower rims. 15x8 is too wide, especially for a 30x9.5.... I just bought some 15x5.5s of zukmeista with the centers flipped for $400 shipped to my door. For the $400 odd you're looking at for those steelies from 4WDBits, you could buy some stock 15x5.5s and have the centers flipped ...
by Sausager
Sat Nov 26, 2016 7:47 am
Forum: Suzuki
Topic: Rusty the SJ413
Replies: 51
Views: 5175

Re: Rusty the SJ413

I'm torn between deleting the charcoal canister from the system. If I do that, how will the fuel tank breathe? my old 413 didn't have a charcoal canister , the tank just vented to atmosphere through a small filter My SJ system didn't, but the Vitara did. I have it all there, it just seems a little ...

Go to advanced search