Offroad-Express

jade_l

2 3m boxes of flexy flares 100 each takes them

jade_l

Lol so it is I didn't notice that! I'm sure I've read on hear about using an extra cab chassis under a 130 but asked on here before and got the same answer. Then read above that extra cab fits on surf chassis but I guess that's different because the cab will stop short of the rear wheels

jade_l

So does this mean you can put 130 body onto extra cab chassis as well?

jade_l

Option 1 out of the question unfortunately. And I'm not sure a certifier would be keen on inspecting it for nothing if I didn't go ahead with it.
Also what's involved with putting a turbo on a 2.8 would it still go alright if I just removed it all or would there be a bit more to it?

jade_l

Hi guys I'm looking at buying a ln107 with a sas conversion. Looks to be done pretty well with extended shock towers and long shocks. Problem is it has no cert. Would this be a straight forward job my understanding is it can be done by a component welder not necessarily a ticketed welder so I should...

jade_l

Cheers guys. I thought i read somewhere that a extra cab chassis would work. May have misread it.

jade_l

Sure this has been covered but not having any luck finding the info.
What breed hilux chassis will fit my ln130 surf. I know there is one that requires body mounts to be moved but not too worried about that.
Cheers

jade_l

0800 REMAKE

jade_l

Cant remember who sorry they were white plates but issued with the same number.

jade_l

I had a old falcon that had been backed into damaging the front plate. I rang up and got replacement plates making sure to get the same numbers because i didnt want to end up with GAY123 type plates.
They sent me two plates out cost bugger all aswell.

jade_l

Cheers will have a look tomorrow. Mines the newer shape dash though.

jade_l

Im guessing its the yellow and black on the next plug

jade_l

Bugger it might be. Any idea on the colour of the alt charge light?

jade_l

Im currently rewireing the 3.8 in my surf anybody got a wiring diagram or can tell me what this wire is (yellow and green)
Cheers

jade_l

Got her sorted i think. Cas was first problem and i think i may have cracked a plug when i was testing for spark, its a series 2 vr engine i tried different dfi aswell. Done 300kms this weekend away hunting and its ran pretty well. Just has a slight miss every now and then at very light throttle, li...

jade_l

I will swap back to my old leads and see how it goes. The ones on it at the moment where near new when old motor blew up.

jade_l

I got it to run (very poorly) before i put the new cas in also.

jade_l

Any more bright ideas? Put a new cas in today still not running 100% has a miss when i put my foot down not too bad at light throttle I also tried the tps of my old motor and it seemed to make buggar all difference. Changed dfi coils and leads of my old motor which was running fine until it decided ...

jade_l

Yeah i understand i have fuel and spark. My understanding of wasted spark was that one cylinder is ignited while compressed and another "empty" cylinder is also ignited simultaneously. I was thinking that since it wasnt sparking on time the "empty" cylinder may not be empty becau...

jade_l

Will disconnect tps tommorow and see what it does, at the moment it just turns over for a while then kicks back and backfires.
So im guessing the wasted spark set up would cause it to backfire?

jade_l

Be great if it was that easy ashoman.
Thanks crash i thought cas would throw a fault code so it had me stumped. Also thought they gave a bit of warning lol.
Looks like i need a cas then lol

jade_l

Jumped in the surf this morning to go to work and it doesnt want to go. Has been sitting since friday.
It just winds over but no fire.
After a couple of attempts it backfired a couple of times.
Any ideas where i should start?
Cheers
Jade

jade_l

Diff is back in surf now havent tested it though. Cheers for the link but doing it the way they show would of damaged the bearing. In this case it cant of been driven home properly and was stopping the head coming out of the housing.

jade_l

Sweet will try that after work. Wasnt sure if it is supposed to go in, or come out.
Cheers

jade_l

Need to get this bearing out.

jade_l

Yep removed both axles. Will post a pic

jade_l

Hi there been having a crack at putting my lokka in over the weekend and have come to a bit of a halt. I cant seem to get the diff head out of the housing. Ive removed the axle tube. Both axles and bearing caps. But the diff head wont come out. The 2 roller bearings on either side sit too proud and ...

jade_l

It was running fine so the ecu problably isnt the problem. There is no power at the ignition switch wire on the computer.

jade_l

Hi there anybody know which wire on the ignition barrel plug supplys the ecu?
We have had a barrel apart and put back together but now there is no glow light.
Engine cranks fine but fails to glow or fire.
Cheers

jade_l

Everything except antenna. But may even have the correct one here for it.
Cheers

Search found 75 matches

2x Boxes of Flexy flares $100 each

Re: E/C Hilux body onto 130 chassis

Re: E/C Hilux body onto 130 chassis

Re: Hilux SAS cert

Hilux SAS cert

Re: Another SAS question.

Another SAS question.

Re: no front nimber plate?

Re: no front nimber plate?

Re: no front nimber plate?

Re: Ln130 surf dash wiring

Re: Ln130 surf dash wiring

Re: Ln130 surf dash wiring

Ln130 surf dash wiring

Re: Comy V6 surf wont start

Re: Comy V6 surf wont start

Re: Comy V6 surf wont start

Re: Comy V6 surf wont start

Re: Comy V6 surf wont start

Re: Comy V6 surf wont start

Re: Comy V6 surf wont start

Comy V6 surf wont start

Re: IFS surf diff head lokka install

Re: IFS surf diff head lokka install

Re: IFS surf diff head lokka install

Re: IFS surf diff head lokka install

IFS surf diff head lokka install

Re: Kzn130 ignition wiring

Kzn130 ignition wiring

Re: Fs: bearcat 980ssb cb radio