hi,
I thought maybe someone could share his experience with a unichip in a KZJ78?
is there a difference to the Prado J95 with 1KZ TE?
thanks
Peter
Search found 95 matches
- Tue Jul 13, 2021 10:50 pm
- Forum: Toyota
- Topic: anyone running a unichip in a KZJ78 ?
- Replies: 0
- Views: 8221
- Tue Jul 13, 2021 10:47 pm
- Forum: Toyota
- Topic: 1996 KZJ78 starting issue
- Replies: 5
- Views: 3109
Re: 1996 KZJ78 starting issue
hi, after endless searching the ECU was found the culprit
capacitor leaked and that was it
fortunately I found someone to spot and fix it
runs strong again
what a desaster but luckyly not an expensive endeavour
capacitor leaked and that was it
fortunately I found someone to spot and fix it
runs strong again
what a desaster but luckyly not an expensive endeavour
- Fri Mar 05, 2021 6:31 pm
- Forum: Toyota
- Topic: 1996 KZJ78 starting issue
- Replies: 5
- Views: 3109
Re: 1996 KZJ78 starting issue
thanks Stu! diagram says 5L engine but logic might be very similar, I will compare with the japanese version i found on ih8mud.
how or where do I best share the japanese version if anyone else is interested?
how or where do I best share the japanese version if anyone else is interested?
- Wed Mar 03, 2021 5:02 am
- Forum: Toyota
- Topic: 1996 KZJ78 starting issue
- Replies: 5
- Views: 3109
Re: 1996 KZJ78 starting issue
hi all, I have continued the search for the impossible. what I did today: tested both main relays, oem no 85915-60030 does anyone know why there are two main relais? one is on a grey plug the other on a black plug. switched the relais and both are klicking with ignition on if connected to the grey p...
- Tue Mar 02, 2021 9:44 pm
- Forum: Mitsubishi
- Topic: Delica 2.8 noise issue intake side?
- Replies: 0
- Views: 8185
Delica 2.8 noise issue intake side?
hi all, my newest addition to car trouble is a 1994 L400 2.8 4m40 powered. what puzzles me: when in neutral you can rev up to 4000 (didn´t go beyond) without a thing. when under load driving, from 2500 revs there is a noisy blow by sound. found that there is the pressure relief valve on intake manif...
- Tue Mar 02, 2021 9:38 pm
- Forum: Toyota
- Topic: 1996 KZJ78 starting issue
- Replies: 5
- Views: 3109
1996 KZJ78 starting issue
hi all, can´t believe the bad luck I am having with the truck. just had everything welded up and repaired for inspection. saturday morning I got in the truck and it started spot on after sitting weeks in the cold driveway, temps here in central Europe around zero at the moment. just moved it out of ...
- Thu Oct 29, 2020 7:35 pm
- Forum: Mitsubishi
- Topic: Mitsubishi Delica 2.8td - data sheet for import
- Replies: 3
- Views: 2521
Re: Mitsubishi Delica 2.8td - data sheet for import
hey , many thanks.
I´ve visited both sites. the spritmonitor is a website where individuals post their actual consumption over whatever period they like.
the other one quite helpful, but prefarably looking for a document which has been accepted by an authority.
thx
peter
I´ve visited both sites. the spritmonitor is a website where individuals post their actual consumption over whatever period they like.
the other one quite helpful, but prefarably looking for a document which has been accepted by an authority.
thx
peter
- Wed Oct 28, 2020 12:36 am
- Forum: Mitsubishi
- Topic: Mitsubishi Delica 2.8td - data sheet for import
- Replies: 3
- Views: 2521
Re: Mitsubishi Delica 2.8td - data sheet for import
I believe for the import there needs to be a code on the deregistration sheet indicating emission class or so
- Tue Oct 27, 2020 11:14 pm
- Forum: Mitsubishi
- Topic: Mitsubishi Delica 2.8td - data sheet for import
- Replies: 3
- Views: 2521
Mitsubishi Delica 2.8td - data sheet for import
hi all, I am looking for some help with a data sheet for a Delica lwb, 2.8 td 4M40 engine. I am in the process of buying one but to get it registered in our country (Austria) I need a data sheet including CO2 emission or fuel consumption. how is that in NZ? do you need prove of that when importing/l...
- Fri Apr 05, 2019 2:46 am
- Forum: Toyota
- Topic: KZJ78 Intercooler and other Upgrades
- Replies: 20
- Views: 12616
Re: KZJ78 Intercooler and other Upgrades
finally the turbo is installed in combination with chip tuning box at medium level it fires up to 4900 revs/min which was 4500 before both at factory boost of 0,7bar. I don´t feel any delay in spooling up, bottom torque still good. before playing with boost and chip set I need to refresh the road te...
- Fri Apr 05, 2019 2:42 am
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
hi guys after a break of 1,5 years my KZJ78 is finally back to life. during installation of my upgrade turbo with bigger turbine wheel the guy at the garage damaged the wiring from ecu to fuelpump as suspected. that has been fixed now, the fuelpump was totally rebuilt which doesn´t hurt after 23 yea...
- Fri Sep 07, 2018 6:08 pm
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
short update here:
ECU was checked at electronics shop, capacitors are still fit for the job, no flaws detected.
this reduces the source of error to the cables between pump and ECU.
tired of it...
regarding conversion still no donor car found. will try to get it going first and then keep searching.
ECU was checked at electronics shop, capacitors are still fit for the job, no flaws detected.
this reduces the source of error to the cables between pump and ECU.
tired of it...
regarding conversion still no donor car found. will try to get it going first and then keep searching.
- Mon Jul 16, 2018 7:12 pm
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
now i tried to hook up the ECU from a Prado 95 but it would not work as well. starter motor turning strong but no firing up. probably as assumed the immobiliser. didn´t expect the starter motor turning at all.
no progress again. too little time.
start thinking about conversion to manual pump.
no progress again. too little time.
start thinking about conversion to manual pump.
- Fri Jul 13, 2018 10:39 pm
- Forum: Toyota
- Topic: Cracked head chinese or gen
- Replies: 13
- Views: 5560
Re: Cracked head chinese or gen
little update from my side. I still run a chinese replacement head without any problems for almost 50k now. that´s why two friends installed chinese heads as well very recently. what shall I say. both broke in no time doing less than 20k. the valve seat bushings came loose leading to one valve damag...
- Fri Jul 06, 2018 1:30 am
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
i would check ecu. really common to get capacitor failures on those old vehicles. that tends to cause a few weird problems. i suspect it screws with the voltage required for the sensors. you should not get low voltage cutout at 12v. typically i think its around 10 or 11v. however worth checking to ...
- Thu Jul 05, 2018 1:45 am
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
hi guys, long time no write up on my problem basically it was winter time and i was not too eager to work in sub zero conditions as car is parked outside. have removed all immobilizer wirings and some other unidentifiable cables here and there to get it back to original wiring. still no success. mea...
- Fri Nov 10, 2017 8:01 pm
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
thanks tweake for clarification. sounds logical. will follow your lead.
- Fri Nov 10, 2017 1:52 am
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
well, strange enough... today I spent some time to try the diagnosis routine of the WSM. no error code I checked some of the connectors which is not easy . the one connector on top of the pump, is it kind of a power supply for the pump? is it the speed sensor? actually I DON´T get any voltage there....
- Mon Nov 06, 2017 8:34 pm
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
makes sense, will look into it.
unfortunately will not get to it before the weekend, will keep you posted!
unfortunately will not get to it before the weekend, will keep you posted!
- Sun Nov 05, 2017 8:28 pm
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
i have checked all sensors, well there aren´t too many, for my understanding there are also air temp, boost and RPM which are all not crucial to fire up. it would fire up with petrol in the intake but stalling instantly. I wonder if it has anything to do with the immobiliser. I imported the car from...
- Sat Nov 04, 2017 7:20 pm
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
yes, I did that Calvin. Anyone ever heard of an injection pumps sudden death? some people tell me that happens. car was standing for less than a week, hard to believe. buddy will give me another pump to try but still not logical. anyone knows how to check pump without deinstalling? since I had a qui...
- Sat Nov 04, 2017 5:33 am
- Forum: Having problems?
- Topic: !997 Prado 1KZ-TE Starting Issues
- Replies: 21
- Views: 25471
Re: !997 Prado 1KZ-TE Starting Issues
hi guys, don´t want to open another thread. now it hit me. and it hit me hard.... KZJ78 1KZ-TE whilst undergoing a seriouus turbo upgrade we were trying to move the car for a few meters. no turbo attached. started after 20 seconds and died instantly. since then nothing. checked intake, sucks in alri...
- Wed Oct 25, 2017 6:43 pm
- Forum: Toyota
- Topic: Diesel tuner
- Replies: 14
- Views: 3269
Re: Diesel tuner
injectors usually send some signs when they want replacement. rough idle and run, some smoke maybe.
if there´s none of it why change. they cost some serious money if oem
if there´s none of it why change. they cost some serious money if oem
- Tue Oct 24, 2017 3:00 am
- Forum: Toyota
- Topic: Diesel tuner
- Replies: 14
- Views: 3269
Re: Diesel tuner
depends also on the general setup.
12 - 14 l/100km is quite normal for me.
I have 33" tyres and run 4.88 diff ratio. automatic gear box.
only on highways cruising 100km/h I come down to 11,5
on 31" with 4,33 diff ratio I did 10,5 - 12,0
it´s a big car, I wonder who get´s more out of it?
12 - 14 l/100km is quite normal for me.
I have 33" tyres and run 4.88 diff ratio. automatic gear box.
only on highways cruising 100km/h I come down to 11,5
on 31" with 4,33 diff ratio I did 10,5 - 12,0
it´s a big car, I wonder who get´s more out of it?
- Tue Oct 24, 2017 2:30 am
- Forum: Toyota
- Topic: 1KZ-TE chip tuning available
- Replies: 2
- Views: 3852
Re: 1KZ-TE chip tuning available
I received a small box which needs to be wired to the ECU, cut into the wiring there.
the instruction is german language but the pics speak for themselves I guess?
the instruction is german language but the pics speak for themselves I guess?
- Fri Oct 20, 2017 8:39 pm
- Forum: Toyota
- Topic: KZJ78 Intercooler and other Upgrades
- Replies: 20
- Views: 12616
Re: KZJ78 Intercooler and other Upgrades
refurbished turbo is here.
they threw in a bigger compressor wheel, the latter plus 5mm in diameter... altough i said please don´t go too far.
will have to try I guess.
I will install it on friday and report back
they threw in a bigger compressor wheel, the latter plus 5mm in diameter... altough i said please don´t go too far.
will have to try I guess.
I will install it on friday and report back
- Fri Oct 20, 2017 7:49 pm
- Forum: Toyota
- Topic: 1KZ-TE chip tuning available
- Replies: 2
- Views: 3852
1KZ-TE chip tuning available
hi All, I have recently installed this chip tuning to my KZJ78 alltough it is probably made for the J9 series 1KZ-TE. see for yourselves http://www.chip-tuning.at/en/pkw/land-cruiser-30-tde-lc-90-1kz-te I am quite happy with the result, it has 9 levels, I run it currently on level 5 which shall give...
- Sun Oct 15, 2017 10:45 pm
- Forum: Toyota
- Topic: KZJ78 Intercooler and other Upgrades
- Replies: 20
- Views: 12616
Re: KZJ78 Intercooler and other Upgrades
hi guys, since I only wired my turbo boost gauge recently I found the pressure not going beyond 0,6 bar (8,7psi) while I think 0,7 (10,15psi) would be stock. on my latest trip my travel buddies told me about the eventual blue smoke when under pressure. honestly it feels like if the turbo has had it´...
- Sat Sep 23, 2017 3:46 am
- Forum: Toyota
- Topic: Cracked head chinese or gen
- Replies: 13
- Views: 5560
Re: Cracked head chinese or gen
I was about to say that there´s something missing
- Fri Sep 15, 2017 1:11 am
- Forum: Toyota
- Topic: long range fuel tank KZJ78?
- Replies: 3
- Views: 1257
Re: long range fuel tank KZJ78?
thank you guys,
options 1) and 3) are for 78 HZJ which is much different from KZJ but there is one option 2) ARB for HZJ76 which comes closest to the KZJ78 design. will look into...
cheers
Peter
options 1) and 3) are for 78 HZJ which is much different from KZJ but there is one option 2) ARB for HZJ76 which comes closest to the KZJ78 design. will look into...
cheers
Peter