Does anyone know how to tell the difference between a front locking diff housing and non locking housing?
Cheers
Search found 37 matches
- Wed Apr 14, 2021 12:45 pm
- Forum: Drivetrain / Suspension
- Topic: Hdj81 vx diff housings
- Replies: 1
- Views: 1910
80 series
I have a 95 24valve vx triple locked and am on the hunt for a whole front end hub to hub preferred, if anyone can help?
- Thu Jan 21, 2021 6:38 pm
- Forum: Having problems?
- Topic: Hdj81 both wheels leaning drivers side at the top
- Replies: 8
- Views: 5018
Re: Hdj81 both wheels leaning drivers side at the top
Yeah man, using a straifght edge and good eyesight the drivers side is just as bad, could anyone help me in the way of finding a new housing?
- Thu Jan 21, 2021 8:26 am
- Forum: Having problems?
- Topic: Hdj81 both wheels leaning drivers side at the top
- Replies: 8
- Views: 5018
Re: Hdj81 both wheels leaning drivers side at the top
No movement in kingpins, iv checked them also, and their bearings are ok too.. might just havto bite the bullet and take it to the shop
- Wed Jan 20, 2021 11:46 am
- Forum: Having problems?
- Topic: Hdj81 both wheels leaning drivers side at the top
- Replies: 8
- Views: 5018
Re: Hdj81 both wheels leaning drivers side at the top
Yeah hard to find one in wanaka though
- Tue Jan 19, 2021 7:36 am
- Forum: Having problems?
- Topic: Hdj81 both wheels leaning drivers side at the top
- Replies: 8
- Views: 5018
Re: Hdj81 both wheels leaning drivers side at the top
Its about the same both sides, i have checked king pins and bearings.
I suspect iv bent something serious?
I suspect iv bent something serious?
- Tue Dec 29, 2020 9:32 am
- Forum: Having problems?
- Topic: Hdj81 both wheels leaning drivers side at the top
- Replies: 8
- Views: 5018
Hdj81 both wheels leaning drivers side at the top
What have i bent?
Both front wheels leaning to the drivers side at the top \ \ king pins and everything else seem fine that i can see.. would axle and housing bent cause this?
Thanks
Both front wheels leaning to the drivers side at the top \ \ king pins and everything else seem fine that i can see.. would axle and housing bent cause this?
Thanks
- Fri Nov 20, 2020 5:46 am
- Forum: Toyota
- Topic: A442f trans temp
- Replies: 2
- Views: 2772
A442f trans temp
Anyone got any info/pics or direction into where to put the auberins temp sensor in their gbox?
Cheers
Cheers
- Tue Jun 30, 2020 6:05 pm
- Forum: Tool Shed
- Topic: Lighting rules
- Replies: 2
- Views: 2126
Lighting rules
I failed a wof for having 4 fog lights today in my 80 series with factory yellow foggys and two new ones on my bullbar. Didnt know you could only have 2. Kinda makes sense but anywaysss is it possible to change my yellow foggys to two normal headlights also as theyr in the same housing etc. Or a no ...
Re: 80 series
Oh i do like that idea! Looks good!!
80 series
has anyone got any photos of how they have mounted more switches in the cab of their 80??
- Thu Aug 29, 2019 6:34 pm
- Forum: Toyota
- Topic: 95 80 series winch
- Replies: 0
- Views: 9945
95 80 series winch
interested if anyone has installed an after market winch inbehind the front bumper with a front mount intercooler?
wondering if theres enough room for clearances etc... would perfer the factory bumper look at this stage anyway. any help or advice be good
churr
wondering if theres enough room for clearances etc... would perfer the factory bumper look at this stage anyway. any help or advice be good
churr
- Wed May 01, 2019 7:41 pm
- Forum: Toyota
- Topic: auto electrics
- Replies: 0
- Views: 3703
auto electrics
this may be a silly question but here goes anyways.. i have a 95 24 valve vx... weapon it has an 80w solar pannel on the roof and from my understanding it keeps the battery charged enough to run my 60l fridge and if the fridge drains too much power itl shut that off so theres enough charge to start ...
- Fri Apr 26, 2019 8:34 pm
- Forum: Toyota
- Topic: 95 80 series ABS
- Replies: 3
- Views: 3397
Re: 95 80 series ABS
Its got it mate, cheers will do i think iv got it sussed after a mission, good to have the old girl on the rd again
- Thu Apr 25, 2019 8:04 am
- Forum: Toyota
- Topic: 95 80 series ABS
- Replies: 3
- Views: 3397
Re: 95 80 series ABS
Even the parts numbers would be a good help
- Wed Apr 24, 2019 6:05 pm
- Forum: Toyota
- Topic: 95 80 series ABS
- Replies: 3
- Views: 3397
95 80 series ABS
right so i am in dire need of a new left front abs sensor that plugs into the swivel hub housing and also an abs ring that goes on the outer axle/cv if anyone would know where to source? have searched far and wide but not much luck sofar, can i just undo the abs fuse or something to still drive it? ...
Re: Springs
So how much longer shockies would i need to go with?
- Wed Oct 10, 2018 3:08 pm
- Forum: Toyota
- Topic: 95 24 valve vx
- Replies: 3
- Views: 3377
95 24 valve vx
What diff oils to use and how many litres per diff roughly? And what is the easiest way to refill trans oil? Cant seem to find a bung.. also which oil and how much for this?
- Wed Oct 10, 2018 3:04 pm
- Forum: Toyota
- Topic: Standard 80 series
- Replies: 13
- Views: 9493
Re: Standard 80 series
305 70 r16s mate still waiting on invoice will let you know
Springs
Whats the advantages and disadvantages of coil spacers?
- Thu Sep 13, 2018 12:30 pm
- Forum: Toyota
- Topic: Standard 80 series
- Replies: 13
- Views: 9493
Re: Standard 80 series
Yeah nah sorry team went with 16x8 305 75s just waiting on them to arrive
- Fri Aug 31, 2018 10:21 am
- Forum: Toyota
- Topic: Standard 80 series
- Replies: 13
- Views: 9493
Re: Standard 80 series
Yeah mate thats all good, does anyone know how much wider those bolt on flares are?
- Thu Aug 30, 2018 6:57 am
- Forum: Toyota
- Topic: Standard 80 series
- Replies: 13
- Views: 9493
Re: Standard 80 series
Im going with some 15x10s with 33 x 13.5s on them, ill let ya know how i go
- Tue Aug 28, 2018 9:49 pm
- Forum: Toyota
- Topic: Standard 80 series
- Replies: 13
- Views: 9493
Standard 80 series
So i need some advice on wheel sizing, i am pretty keen on some 33 12.5 size tyres but unsure what best offset for standard height? I have a 95 vx unsure what size rims also.. any help be much appreciated.. or can i go bigger than 33? :lol: :lol: i would rather not have to change and adjust too much...
- Tue Aug 28, 2018 7:34 am
- Forum: Toyota
- Topic: 80 series stndard height
- Replies: 2
- Views: 3530
Re: 80 series stndard height
Thanks mate
- Mon Aug 27, 2018 6:19 pm
- Forum: Toyota
- Topic: 80 series stndard height
- Replies: 2
- Views: 3530
80 series stndard height
Could anyone help me out with standard height of a 95 80 series vx??
- Mon May 02, 2016 7:26 pm
- Forum: New Members and Beginners
- Topic: rear tow/snatch/recovery 80 series
- Replies: 6
- Views: 5829
Re: rear tow/snatch/recovery 80 series
yeah been talkin to me cobber and think thats what we'r going to do.. haha farout musta been stuck nice good, just the way we like it
- Mon May 02, 2016 6:45 pm
- Forum: New Members and Beginners
- Topic: rear tow/snatch/recovery 80 series
- Replies: 6
- Views: 5829
Re: rear tow/snatch/recovery 80 series
ok, i was thinking of getting it modified with my tow bar.... how do people get on with those bolt on pintle hooks then??
- Mon May 02, 2016 5:53 pm
- Forum: New Members and Beginners
- Topic: rear tow/snatch/recovery 80 series
- Replies: 6
- Views: 5829
rear tow/snatch/recovery 80 series
hey all just wondering what people use on their 80 series as rear recovery and towing??
i have just had a hitch receiver made up and bolted into the four holes on the back with 8.8 high tensile bolts, is this sufficient enough?
i have just had a hitch receiver made up and bolted into the four holes on the back with 8.8 high tensile bolts, is this sufficient enough?
- Thu Apr 07, 2016 6:28 pm
- Forum: New Members and Beginners
- Topic: 80 series 12 or 24 v
- Replies: 11
- Views: 11539
Re: 80 series 12 or 24 v
Right too easy thanks team!!