Search found 326 matches

by DEATH_INC
Sun Nov 04, 2012 10:14 am
Forum: 4WD Parts
Topic: WTD Savero 33x12.5x15 MT
Replies: 14
Views: 515

Re: WTD Savero 33x12.5x15 MT

Dirtydog wrote:nangkang mudstars are practicly the same thing,

The GT's are bigger than the Nankangs by a fair bit.
by DEATH_INC
Sun Nov 04, 2012 10:11 am
Forum: Nissan
Topic: nissain 1991 2.7 outo diesel fuel use
Replies: 18
Views: 932

Re: nissain 1991 2.7 outo diesel fuel use

once you do a bit of work to the engine they go well though, like an intercooler, tuned pump, more boost etc, but then the fuel milage goes down quite a bit. Mine does over 160kph (was clocked at 180 by a mate once before the lights were put on the roof), can do the brenderwyn hills in 5th gear (fa...
by DEATH_INC
Sun Nov 04, 2012 9:48 am
Forum: The Bike Bar
Topic: Anyone have a supply of Mikuni carb Main jets?
Replies: 12
Views: 1318

Re: Anyone have a supply of Mikuni carb Main jets?

Do they still have the needle jets? It doesn't really look like it....
I have some jets from a fzr thou (I thought I had more...musta used 'em somewhere...) that have 2X110 and 2X107.5. Bit small but if ya want 'em....
by DEATH_INC
Sun Nov 04, 2012 9:22 am
Forum: Nissan
Topic: nissain 1991 2.7 outo diesel fuel use
Replies: 18
Views: 932

Re: nissain 1991 2.7 outo diesel fuel use

Don't worry about the temp thing, mine has always gone up heaps up hills, as long as it doesn't boil it's all good.
by DEATH_INC
Sun Nov 04, 2012 9:08 am
Forum: Nissan
Topic: Hi...and a couple of [Terrano] questions :-)
Replies: 6
Views: 983

Re: Hi...and a couple of [Terrano] questions :-)

If you're gonna leave everything attached, get a gasket from the intake manifold end, and make a sheetmetal 'plate' the same shape as the gasket, but with no hole. Then just insert it between the pipe and manifold so it blocks it off. That way the ecu will think it's all on there and working normall...
by DEATH_INC
Sat Nov 03, 2012 4:21 pm
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Good to see the "collective intellegence" of ORE getting stuck in too. He's talking about you oldyella.... :wink: It's a good thing he popped along...I've never used a megasquirt and trying to transfer knowledge from the Link, a couple of bike ecu's I've played with and what I could see o...
by DEATH_INC
Fri Nov 02, 2012 10:58 am
Forum: The Bike Bar
Topic: Anyone have a supply of Mikuni carb Main jets?
Replies: 12
Views: 1318

Re: Anyone have a supply of Mikuni carb Main jets?

I have a few jets somewhere...I'll have a look.
Do you ever come to Auckland?
by DEATH_INC
Fri Nov 02, 2012 9:30 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Yep, what I am thinking is: The MSII has an input for Coolant temp There is a separate input for Air temp - Pin 20. If you are not using the air temp input, what has been done with it? Care needs to be taken to ensure noise is not introduced on this input. Otherwise it could potentially screw up th...
by DEATH_INC
Thu Nov 01, 2012 3:21 pm
Forum: The Bike Bar
Topic: Anyone have a supply of Mikuni carb Main jets?
Replies: 12
Views: 1318

Re: Anyone have a supply of Mikuni carb Main jets?

What sizes? And I assume you know there are a few varieties....some long, some short etc...
by DEATH_INC
Thu Nov 01, 2012 9:54 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

His map is reading what looks correct, and is certainly getting varying vacuum measurements...I doubt it's a blocked hose. Air temp will be ok for what he's doing (no boost off load) and will probably be ok anyway, the Links didn't use air temp 'till the new series and ran fine without it. Map is st...
by DEATH_INC
Thu Nov 01, 2012 9:19 am
Forum: Nissan
Topic: 2wd steering mod for Terrano
Replies: 132
Views: 13947

Re: 2wd steering mod for Terrano

The parts you need are BnT/Autolign part # TR680 (centerlink) rrp $170+gst X1 and TE673r (tie rod ends) rrp $ 47+gst each X 2. Then you need to find a friendly local engineer to tap out the 2 adjuster sleeves and 2 locknuts to 18mm. And if you need it you can get an awesome black idler brace :mrgree...
by DEATH_INC
Wed Oct 31, 2012 2:29 pm
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Cool as, just wanted to see that the maps hadn't gone haywire, look pretty good to me.
Fwiw I don't agree with the local megasquirt guy, it may work with the earths like that, but I wouldn't do it that way. There is too much potential for electrical noise like that.
by DEATH_INC
Wed Oct 31, 2012 10:10 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

You can't see what the fuel mixture is doing can you? If the injectors are open and dumping to much fuel into in it would show that its super rich with the pump on. Switch pump off carrys on running cos it's got to much fuel and slowly leans out until the point of stalling? No, He doesn't have an o...
by DEATH_INC
Wed Oct 31, 2012 8:47 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

(edit; Ive edited heaps from my first attempt... :lol: ) I think I've got something...if the gauges on the top right are pulse width and duty cycle? They both go way to high. Off boost the injector (duty) cycle should only go to around 20% max. Yours is going full. So is the pulse width. I thought i...
by DEATH_INC
Wed Oct 31, 2012 8:35 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

I'm at an absolute loss as to how it can run that long and rev that much with 0 fuel pressure. It makes absolutely no sense at all. All I can think is the injectors are wide open and it's sucking a shitload of fuel whenever the throttle is closed and it creates a heap of vacuum. But even that doesn'...
by DEATH_INC
Wed Oct 31, 2012 8:03 am
Forum: Petrol Engines and Modifications
Topic: EFI conversion fuel supply opinions
Replies: 8
Views: 921

Re: EFI conversion fuel supply opinions

I like the #3 option, surge tank with pump up front. No worries about surging in the tank, and no high pressure lines running the length of the truck. Easy wiring (dunno if the carb loom is up to the higher amp draw?) too.
by DEATH_INC
Tue Oct 30, 2012 1:30 pm
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Although after reading that still do not understand why i only have 1 earth cable coming from ECU in the loom...This cable is not a heavy gauge cable either but i have soldered it to a 25amp cable to earth Mmmm, I'd try to take a peak at what is coming from the plug, see if they've joined 'em all t...
by DEATH_INC
Tue Oct 30, 2012 12:15 pm
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Paulballz wrote:* PIN 20/31/37 control relay negative

Why does 20 go there? (air temp sensor)
And what does 31 do on yours?
by DEATH_INC
Tue Oct 30, 2012 11:47 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Nope mine is v2.2 This diagram here http://www.megamanual.com/v22manual/mwire.htm Only difference is the drawing i have has * Pin 24 = CAS * Pin 25 = COIL 1/6 * Pin 27 = COIL 2/5 * PIN 29 = COIL 3/4 * PIN 31 = VCT * PIN 32/33 goes to INJECTOR 1-2-3 * PIN 34/35 goes to INJECTOR 4-5-6 * PIN 20/31/37 ...
by DEATH_INC
Tue Oct 30, 2012 11:27 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Paulballz wrote:
DEATH_INC wrote:
Paulballz wrote:Ok have tryed that before will do again though run straight to batt earth

Sorry, I may have to take that back...does the megasquirt have 1 or 2 earth wires? Most ecu's have a main earth and a sensor earth.


Just one earth...

I doubt that's right. It should have at least 2.
by DEATH_INC
Tue Oct 30, 2012 11:24 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Ok have tryed that before will do again though run straight to batt earth Sorry, I may have to take that back...does the megasquirt have 1 or 2 earth wires? Most ecu's have a main earth and a sensor earth. Just one earth... This is where i had so much drama doing wiring as the megasquirt diagram i ...
by DEATH_INC
Tue Oct 30, 2012 11:17 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Ok have tryed that before will do again though run straight to batt earth Sorry, I may have to take that back...does the megasquirt have 1 or 2 earth wires? Most ecu's have a main earth and a sensor earth. Do you have the V3? If you do the sensor earth should be pin 7, run that one to the block, on...
by DEATH_INC
Tue Oct 30, 2012 11:12 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

In fact, move anything that isn't a sensor earth from there (coilpacs etc), the sensors like a 'clean' signal.
by DEATH_INC
Tue Oct 30, 2012 11:06 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Hey meatc, the RB engine has a section by the thermostat that is used (standard) for all the earths. I have ran my grounds for the following going there through 6 heavy wires... CAS / Boost Solenoid / Idle up / ECU / Coilpacks / TPS / Coolant sensor / VCT (these are the only original components use...
by DEATH_INC
Mon Oct 29, 2012 2:26 pm
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

but if there was no pressure at the fuel rail it wouldnt run? Egg-sack-tlee, that's what's got me buggered too is the fuel pressure reading done via electrical means? if its the ecu thats reading no fuel pressure at the rail and theres an electrical problem couldnt it be reading wrong? I think (is ...
by DEATH_INC
Mon Oct 29, 2012 11:51 am
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

This is starting to sound like a wiring problem, maybe the pump is turned on when it says its off? have you checked the loom out yet? That's sorta what I was thinking, if it's wired wrong it may be backfeeding and running at odd times, but not properly....if you know what i mean.... :? Though he do...
by DEATH_INC
Mon Oct 29, 2012 8:51 am
Forum: Nissan
Topic: Torsion Bar's Sagging?
Replies: 12
Views: 594

Re: Torsion Bar's Sagging?

You'll get varying opinions on this...I prefer the adjustable Rancho rs9000xl shocks Myself. Last set of Rancho's I had lasted Me 12 years....I replaced 'em with the same.
by DEATH_INC
Sun Oct 28, 2012 9:44 pm
Forum: Nissan
Topic: Torsion Bar's Sagging?
Replies: 12
Views: 594

Re: Torsion Bar's Sagging?

BogBoy wrote:262,000 on the RUC but you never know with diesels

Lol...they'll be well shot then :lol: . Go with newies for sure.
by DEATH_INC
Sun Oct 28, 2012 9:40 pm
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Note this: to start the engine i turn fuel on and crank until it trys to fire sometimes it does fire but very cough cough, once fired then i switch pump off and it revs straight up to normal and idles. But it will not fire if i do not prime fuel pump before hand. Another note that may be completey ...
by DEATH_INC
Sun Oct 28, 2012 9:29 pm
Forum: Nissan
Topic: RB25Det Nissan Terrano
Replies: 257
Views: 26615

Re: RB25Det Nissan Terrano

Except mine won't run with the pump disconnected... :lol:

Go to advanced search