Only real place they can come from is CV joints.
Have you checked CV's
Cheers Daniel
Search found 592 matches
- Mon Mar 26, 2012 8:32 pm
- Forum: Toyota
- Topic: ln61 axles and rear diff universal help??
- Replies: 8
- Views: 985
- Mon Mar 26, 2012 6:14 pm
- Forum: Toyota
- Topic: ln61 axles and rear diff universal help??
- Replies: 8
- Views: 985
Re: ln61 axles and rear diff universal help??
the other day i went 4a stalk down the river when i got back on the hard i unlocked my hubs jumped in my truck took it out of 4wd then i hurd a tinging sound i hopped out and n oticed two ball bearings rolling around. . i had a look to see were they were from and seen it was from my axle? has it co...
- Sun Mar 18, 2012 4:46 pm
- Forum: Toyota
- Topic: tyre wear help!!!
- Replies: 4
- Views: 496
Re: tyre wear help!!!
Get a wheel alignment, compare it to factory specs and work backwards from there.
Cheers Daniel
Cheers Daniel
- Wed Mar 07, 2012 5:47 pm
- Forum: Planning a trip?
- Topic: Godley Glacier 3rd-5th-7th Aug 2012
- Replies: 415
- Views: 42177
Re: Godley Glacier 3rd-5th-7th Aug 2012
Could be a go, if my trucks going...
- Fri Mar 02, 2012 7:08 pm
- Forum: Tool Shed
- Topic: long travel spline wanted
- Replies: 9
- Views: 997
Re: long travel spline wanted
jakwoo39 wrote:im a machinist so open to any ideas
Make one bro
- Mon Feb 13, 2012 8:17 pm
- Forum: Suzuki
- Topic: V6 springs + VL Commadore shocks
- Replies: 75
- Views: 11864
Re: V6 springs + VL Commadore shocks
Longer bump stops will stop your springs coming loose at full artic, but will limit articulation, and i assume you would still fail a wof, as on the hoist it will be at full droop, therefore only shorter shocks, or longer springs will sort your issue. Or theres some sort for spring retainers you cou...
- Mon Feb 13, 2012 7:36 pm
- Forum: Toyota
- Topic: 1kz swap for a 2.4
- Replies: 31
- Views: 5789
Re: 1kz swap for a 2.4
4.8:1 are allgood, 2900rpm at 100km/h on 33's
Cheers Daniel
Cheers Daniel
- Mon Feb 13, 2012 7:30 pm
- Forum: Toyota
- Topic: Hilux drum brake parts
- Replies: 2
- Views: 464
Re: Hilux drum brake parts
Circlip with a washer behind will be fine.
Cheers Daniel
Cheers Daniel
- Mon Feb 13, 2012 7:29 pm
- Forum: Toyota
- Topic: 33's under a KNZ130
- Replies: 25
- Views: 3503
Re: 33's under a KNZ130
Any suspension lift theoretically needs a wheel alignment.
Cheers Daniel
Cheers Daniel
- Wed Feb 08, 2012 10:01 pm
- Forum: 4WD's Forsale / Wanted
- Topic: For sale: Sased Mu
- Replies: 2
- Views: 834
- Sun Jan 15, 2012 9:25 am
- Forum: 4WD Parts
- Topic: Donaldson Pre-Cleaners in NZ
- Replies: 8
- Views: 1485
Re: Donaldson Pre-Cleaners in NZ
http://www.twlnz.co.nz/home
Can get anything donaldson from them, they would have to order it tho.
Cheers Daniel
Can get anything donaldson from them, they would have to order it tho.
Cheers Daniel
- Sun Jan 15, 2012 9:20 am
- Forum: Tool Shed
- Topic: Workshop Wisdom
- Replies: 67
- Views: 6329
Re: Workshop Wisdom
If you have time to polish and put away tools your not doing enough work. Theres Nothing a welder cant fix Screwdrivers make great prybars aswell, until the snap, causing great injury. Bench mounted wire wheels and small objects generally result in fingers being sucked it, resulting in blood. Using ...
- Sun Jan 08, 2012 7:34 pm
- Forum: New Members and Beginners
- Topic: Hi All , newbie to off road
- Replies: 5
- Views: 934
Re: Hi All , newbie to off road
Yeah pics are a must, and just pop into your private messages and update your profile with your location, makes its abit eaiser.
Cheers Daniel
Cheers Daniel
- Sun Jan 01, 2012 11:54 pm
- Forum: New Members and Beginners
- Topic: Hi :)
- Replies: 5
- Views: 814
Re: Hi :)
Hey welcome along, the chch boys are a semi-allright bunch Post up some pics dude.
Cheers Daniel
Cheers Daniel
- Fri Dec 30, 2011 8:02 pm
- Forum: Projects / Mod's
- Topic: 1981 HILUX REBUILD
- Replies: 126
- Views: 29135
Re: 1981 3RZ HILUX BUILD
I reckon youd be right without an oil cooler, assuming your meaning engine oil, as for trans oil, your can get a decent, cheap kit from repco, and supprisinly they are pretty good.
Cheers Daniel
Cheers Daniel
- Fri Dec 30, 2011 7:42 pm
- Forum: Drivetrain / Suspension
- Topic: pro's and con's of raising a surf.
- Replies: 7
- Views: 1207
Re: pro's and con's of raising a surf.
A solid axle would solve alot of problems, but its not a cheap exercise. You can lift an ifs truck 2 inchs without any major dramas, allthough the front diffs are made off glass, and auto locker fixes this problem. But creates another. Its all depends on what type of driving you want to do, and how ...
- Fri Dec 30, 2011 1:56 pm
- Forum: Drivetrain / Suspension
- Topic: pro's and con's of raising a surf.
- Replies: 7
- Views: 1207
Re: pro's and con's of raising a surf.
goosebayhunter wrote:
i realise that this has most likely already been posted but im to lazy to search round here all day.
To be honest, with an attitude like that, your not going to get very far around here. It has be covered alot, and shouldnt take much searching to find, atleast not all day.
Cheers Daniel
- Thu Dec 29, 2011 9:36 pm
- Forum: 4WD Parts
- Topic: Wanted REAR surf diff
- Replies: 25
- Views: 2283
Re: Wanted REAR surf diff
samewan wrote:you can add rear dive shaft to that now driving down the motorway then boom sparks for miles bloody truck more hastle then its worth
Umm wtf, elaborate please, did it snap the pinion or somthing?
- Thu Dec 29, 2011 9:33 pm
- Forum: Diesel Engines and Modifications
- Topic: EGT what is anormal temp
- Replies: 6
- Views: 1391
Re: EGT what is anormal temp
You gauge is post turbo and you hitting 600, somthing doesnt seem right, have you got any other engine mods??
Cheers Daniel
Cheers Daniel
- Tue Dec 27, 2011 12:16 pm
- Forum: Tool Shed
- Topic: half a body lift?
- Replies: 31
- Views: 3472
Re: half a body lift?
mfrsr wrote:while i'm at it, can someone tell the the usual lift heights you need for a 93 Surf to fit 33x12.5's? i'd assume it's about 4inches total + a bit of a trim around the front arches?
cheers
2 Inch suspension lift, and a little trim is all thats needed.
- Mon Dec 26, 2011 6:30 pm
- Forum: Tool Shed
- Topic: half a body lift?
- Replies: 31
- Views: 3472
Re: half a body lift?
Just out of curiousty do you need 6 inches of lift at the back, could you just bring that down to 3 inchs so it levels out abit?
- Sat Dec 24, 2011 12:16 pm
- Forum: Diesel Engines and Modifications
- Topic: EGT what is anormal temp
- Replies: 6
- Views: 1391
Re: EGT what is anormal temp
Weld the probe in the exhaust manifold, before the turbo, and as mid stream as you can be.
Cheers Daniel
Cheers Daniel
Re: LN106 SAG
If i remember correctly, surfs do that, somthing about when theres a driver in it, it sits flat.
Cheers Daniel
Cheers Daniel
- Mon Nov 07, 2011 10:09 pm
- Forum: Tool Shed
- Topic: CASTOR ANGLE URGENT PROBLEM
- Replies: 5
- Views: 603
Re: CASTOR ANGLE URGENT PROBLEM
Coils, or leafs? Coils are good at about 2.5 -3 deg.
Cheers Daniel
Cheers Daniel
- Sun Nov 06, 2011 9:45 pm
- Forum: New Members and Beginners
- Topic: surf vs terrano vs challenger vs wizard
- Replies: 35
- Views: 6615
Re: surf vs terrano vs challenger vs wizard
Dude, for that amount of money you can get a Landcruiser with all lockable diffs and some big AS tyres for that deep sand out the end of Red Rocks. The sand and salt can't be good for them though For rust, my crazy science teacher back in the day tried to tell me this! "bare some chassis, and ...
- Sun Nov 06, 2011 9:42 pm
- Forum: This weekends achievements
- Topic: 5th 6th november
- Replies: 30
- Views: 4858
Re: 5th 6th november
Cut and glued steel, resulting in a big bit of steel.
Re: help!!!
Driveshaft
Re: help!!!
Id be checking the mounts man, pretty hard to tell from here aye. Theres no puddles of oil or anything under it yeah?
- Sun Nov 06, 2011 8:59 pm
- Forum: New Members and Beginners
- Topic: surf vs terrano vs challenger vs wizard
- Replies: 35
- Views: 6615
Re: surf vs terrano vs challenger vs wizard
Dude, for that amount of money you can get a Landcruiser with all lockable diffs and some big AS tyres for that deep sand out the end of Red Rocks. The sand and salt can't be good for them though For rust, my crazy science teacher back in the day tried to tell me this! "bare some chassis, and ...
Re: help!!!
Umm what crossmember?