Offroad-Express

J_Dub

Yep good with standard 3y no mods to motor

J_Dub

I have seen on other trucks they do respond well to a weber carb and some fine tuning Surely though with all you mentioned that would cost $1500? Exhaust alone would be $700? They go good on 33s, I've had 1, the only time I needed more power was hill climbs when I needed control over the pedal, ie: ...

J_Dub

Looking to sell my Pajero I believe its worth more than asking price Its pretty much faultless. Smooth strong runner Bone dry engine bay, underbody. 3ltr v6 auto Hard/soft suspension works 50mm push button lift works WOF reg due end of next month Still got 60,000 left on cambelt Starts effortlessly ...

J_Dub

In short, if its a good conversion, you can't go wrong

If you plan to wheel it you would want to get a custom rear pick up sump made as these starv of oil when on crazy angles for lengths of time.

J_Dub

What engine box combo is currently in it?

J_Dub

Alright so you know everything about Nissan's aaaannnndddd hummers..... Move on

J_Dub

Good to see actual progress with something that initially was a big task and a bit outside the box.. All to often projects start off big and then slowly fade away ( mine included) Your motivation should be huge now its running. Shame tho about max boost at high revs, not ideal for wheeling, hopefull...

J_Dub

I have 31s on mine with no lift and there's heaps a room, rekon ide do a 1" body lift and some trimming and fit 33s

J_Dub

If your adamant you want to try Sim road then go have a look. Talk to the farmer first, there's a few houses right there, but don't be pushy if you think he's getting iffy about it, the road isn't worth it, most that would go there would only be going to do skids.. Its not scenic to justify the driv...

J_Dub

Thing is with Sim road its a dead end road that ends at an old bridge that you can't cross as its rotted out, so it leads to no where. Its in the middle of farm land. Technically you could enter, its only a wire fence. It's basically just a 1km cattle race

J_Dub

No sorry, most would be either gravel or through farm land, bit limited in Auckland

J_Dub

Sim road is a short but gnarly little road, haven't been there for a few years but the farmer does fence it off and have his cows in there often. Definitely not worth a trip if your after something scenic, its just a rough clay track covered with gorse n cow shit but for what it is its pretty rough ...

J_Dub

Its a paj with a locked diff, if it doesn't get thru first go. Reverse up n do it again faster. It won't break easy.

My opinions with what you got especially with the diff lock, is all you need is a good set of muds and a winch and you couldn't ask for more realy.

J_Dub

OK, let me know what you wana do, maybe some Auckland's are heading to trials down the line where they can pass it on to welly fellas

J_Dub

Text me 0274827609

J_Dub

that's all normal maintenance shit for an old vehicle mate and that's why you never buy shit sight unseen unless your prepared to take a risk :D He is right. Considering the price you got it for its still cheap as, try building the truck from a factory to where it is now, you would be looking in ex...

J_Dub

Shit, suck
Hope it works out for ya.

J_Dub

Bump $60

J_Dub

Probably too big but I've a 265/75/16 bfg a/t its in mint cond.

Having trouble selling it
Yours for $60
I'm in pukekohe though

J_Dub

my 2 cents worth the nissan, is the better call limited slip in the rear stronger engine, challenger, ali head ,no slippery , narrow track, bad rear suspension design , that's a start :D How do you know the Nissan is LSD rear? And these terranos have no chassis and all the suspension bushes wear qu...

J_Dub

Was never not running properly.
Just pushing a bit of oil into catch can.
Otherwise started effortlessly, no smoke, hummed all day long

Edit: initially it was sluggish but intake clean and fuel tweak fixed that

J_Dub

What ide do is use ur existing bonnet as a plug, shape that as you want, get it right then from that produce a mould then from that you can produce your new bonnet. Time consuming and probably more than $225 tho

J_Dub

What exactly are u after?

J_Dub

Sold bighorn
Bought a pajero
So now I've owned

Surfs x6
Terrano x2
Cherokee
Bighorn
Pajero
L300 4x4

J_Dub

Long shot cause there ain't too many with a 1st gen but I've made a custom rear bull bar with tow bar, nice and tight, close to the body, mounts for tow hooks, sold truck so now have no use for it.

Let me know if anyone wants it.

0274827609

Jared

J_Dub

Since your doing that. Weld in a bulkhead behind the rear seats, with a window, so its then like a ute with a canopy. U could even properly seal the side pockets then you could hose it out. Get rid of both rear side windows for air flow etc

J_Dub

First and foremost. Get a radiator from redline off trademe. Thicker core alloy, 40% more cooling, and service the viscous fan n be sure its humming. Then there's the other small bits you do that others will chime in on but I believe those first 2 are the most important and will give biggest gains. ...

J_Dub

Nice work, it has so many extras, I believe that was too cheap.

J_Dub

Long shot here but I know there's a few keen fishos. I have an as new shimano tld25 reel spooled with 80lb rainbow braid on a 24 kg rod. Setup for kingfish, never even caught a fish, only had 2 livies on it in its life time. I just never was in a situation to properly use it, as I'm more so doing la...

J_Dub

For that price you can not go wrong.
Ide be all over that if I had the cash, that's cheap for the money spent. You pay $6k for a tidy standard challenger.

That would be extremely capable.
You can not go wrong.

Dooo iiitttt

Search found 1621 matches

Re: Rough estimation of hp after mods...

Re: Rough estimation of hp after mods...

swb pajero petrol $3k

Re: Advice on 3.8 v6 hilux

Re: Advice on 3.8 v6 hilux

Re: im in love, AMG 6X6

Re: 1994 Pathfinder Build

Re: Pajero ideas.

Re: Auckland Region tracks of Andy Cockroft's book

Re: Auckland Region tracks of Andy Cockroft's book

Re: Auckland Region tracks of Andy Cockroft's book

Re: Auckland Region tracks of Andy Cockroft's book

Re: Pajero ideas.

Re: 265/75/16 bfg a/t for sale

Re: 1st gen bighorn rear bull bar for sale

Re: Got the new challenger. :(

Re: Got the new challenger. :(

Re: 265/75/16 bfg a/t for sale

Re: single 235/70r16 wanted

Re: Terrano or challenger

Re: 6-8 feb

Re: first surf build.

Re: first surf build.

Re: 6-8 feb

1st gen bighorn rear bull bar for sale

Re: 1994 Pathfinder Build

Re: How to prevent 1KZ-TE head cracking?

Re: Challenger question

rod reel swap

Re: Challenger question