Offroad-Express

rayndeb

circle track engineering on parkhouse rd

rayndeb

I run 30 in both my cruiser and hilux. If you need to let them down a bit for offroad .Ive got 33 bucks on the hilux and it drives good

rayndeb

Fired up the welder today and made this http://i294.photobucket.com/albums/mm120/pulltits/4x4/Image0062.jpg And this for my damper , Since we put cross over steering in it didnt work. So i made up some new brackets .Bolt on tomorrow http://i294.photobucket.com/albums/mm120/pulltits/4x4/Image0064.jpg...

rayndeb

Im keen for a look if your keen

rayndeb

I had the same problem .So i bit the bullet and did crossover steering .Best mod so far

rayndeb

We welded the fish plates on after a trial fit . http://i294.photobucket.com/albums/mm120/pulltits/4x4/Image0048.jpg Did a tape measure wheel alignment. Bolted everything back together radiator etc .Filled the ps fluid bled system . http://i294.photobucket.com/albums/mm120/pulltits/4x4/Image0054-1.j...

rayndeb

We started by removing all the stock steering . Bolted the new arms on.I had done a hub rebuild kit 2 weeks before . I broke a brake line taking the old rods off. sat the tie rod on the arms then saw that not enough clearance under the sump.About 10mm. I bought the ute with the suspension already do...

rayndeb

Ive got a Ln 65 Hilux .We've just put a trail gear high steer kit in it.got it all hooked up off members of offroad express .

rayndeb

Finally got my mig welder sorted.Have to make something now to see how it goes.New front bar maybe

rayndeb

I got some tyres stripped at tonys blen road ,They told me the tear in the bead was already there .After looking properly I noticed that there was no lube on the beads.I worked in the tyre game for 3 years and know when a tear is new.Bit pissed off but too late once damage is done.I hate when you ri...

rayndeb

Should be like any other diff.have a look at some Niva forums.Should find answers there.

rayndeb

Me And Toms Off road Put a hi steer kit into Hilux.Set it up but needed more sump clearance so we made a new front spring hanger. Build thread to come.Picked up some rear springs for front.Looking for some new shocks to suit now a 4 inch lift instead of a two.Piss really cause front shocks aren't th...

rayndeb

I just did my front bushes .Put stands where you say just lifted back a bit worked fine.I wouldnt get under it though

rayndeb

My windows and wipers are the same.was told its because the rubbers are too hard.the handbrake is because it doesn't have a locker on the adjuster wheel.I have to adjust h brake every couple of months because i have manual so i need it .i still don't rely on it for hills just turn it off and leave i...

rayndeb

Pulled the standard steering set up off the Hilux.Test fit high steer .re assembled steering.get arms back from crack testing next week.Getting excited now.

rayndeb

I am doing a high steer conversion but need a ticketed welder to weld fish plates.I am in culverden so someone close would be good.Will have to a frame truck to you unless you can come to me.Cheers

rayndeb

No and its a nice trip too.

rayndeb

You could go to lake Tenneson up Hanmer way.

rayndeb

Whos got a hi steer hilux I can come and have a look at in CHCH.Ive got a kit coming and want to see one done in the flesh.

rayndeb

My 80 has 3 inch lift with bushes and it drives sweet as

rayndeb

I have ln65 dc with What i think is 2 inch lift and run 33 no prob.On full artic and turning it just touches front inner guard.I am on farm and it gets loaded without any problems.Much better ride with33 over 31.My2cs

rayndeb

finally got picon .Cheers Juz

rayndeb

Went for Sunday drive. With my new Hilux and my old Cruiser .At the top of Amuri Basin.

rayndeb

Saturday picked up new tyres and wheel spacers.Sunday fitted tyres and spacers to hilux Along with bull bar and spotlights .Got dark so spotlights for show at mo .Monday wired new stereo into wifes car.Must look after wife

rayndeb

To everyone who showed interest in these tyres a deal has been done and i have some33 Buckshots to fit tomorrow .Cheers Ray

rayndeb

Anyone got any wheel spacers to fit my hilux about 3/4 to 1 inch. Cheers Ray

rayndeb

we have freight trucks for that

rayndeb

4x 35 inch creepy crawlers to swap for 32s or 33s .About 1/2 2/3rds worn too big for my poor 2.4 hilux.CHCH

rayndeb

Diesel pumps is the man.Highly recomended

rayndeb

darryl poulsen by the waimak

Search found 274 matches

Re: drive shaft's too short???

Re: what psi should i run in my buckshots ?

Re: 14-15 Aug

Re: my wedding hahaha Waipara

Re: Excessive play in drag link

Re: Hilux Cross over steering

Re: Hilux Cross over steering

Hilux Cross over steering

Re: 6-8 Aug

Re: Tony's Tyre service...

Re: Lada Niva Diff Swap

Re: 24th - 25th July

Re: Where to put stands to work on front springs

Re: calling 80 series owners

Re: 10th & 11th July

Hilux Hi Steer

Re: shiny trip

Re: shiny trip

High Steer Hilux

Re: 80 series castor correction- what do you use?

Re: What is standard height for a Hilux?

Re: 12-13 June

Re: 12-13 June

Re: 29-30 May

Re: 35s swap for 32 or 33x15

WTD Wheel Spacers

Re: 35s swap for 32 or 33x15

35s swap for 32 or 33x15

Re: 1HDT 200k service - what to do, and where??

Re: Panel beater in Christchurch?