Offroad-Express

dvk-kp

i'll get up there to drop your transfer case and hubs etc off one day. Haha all good. I forgot about that. Just when ever. its bypass valve and MUST see vac and boost so best to place on manifold somewhere the hose as it closes under boost and opens under vac..otherwise the setup will either bypass...

dvk-kp

I always thought it just went to a vacuum port after the throttle body but before the supercharger so it opened the butterfly at idle when there's vacuum there. That's what I was going to try on mine but using a modified BOV instead. I could be totally wrong and I'm sure someone will point us in the...

dvk-kp

I'd say the butterfly thing is to recirculate air when it's idling. Same setup as what the supercharged v6 commys have. Stops it loading up on a closed throttle I think. Could be wrong tho.

No idea what the other doofer is tho.

dvk-kp

Looking good mate, guna look better buried in a mud hole at full noise!

dvk-kp

New update is great. Loving the made for mobile style :D My only dislike is that people's signatures and posts are exactly the same size, font, and colour and makes its a bit harder to read and flick thru a post to the last bit I was up to... Reading a post and then a signature and wonder where the ...

dvk-kp

Yeah, the smaller the engine, the better it will be. Yes mine is intercooled, and it manages to keep the inlet charge around 50 deg at full noise on the dyno. Mine ran on standard computer at 6lb for a few years with just a rising rate reg and was thrashed pretty hard with no issues, the only reaso...

dvk-kp

I'm also guessing the M90 will be a bit more efficient for a wider range on a 3.5 as opposed to a 4 litre being a smaller engine? Or is my logic wrong there?

dvk-kp

M90s do seem to fluctuate in boost pressures depending if your model runs coated rotors or not, also later model thunderbird ones have bigger and better inlet ports, then if you use a commodore or buick one they are different again, also different inlet manifolds and intercooling tend to give vastl...

dvk-kp

I haven't looked for info on the commy set up but found a site about m90 on a Lexus using 5 inch crank pulley. If the calculator is right I need about a 95 mm pulley to make 6-7psi. But I Was talking with my brother today and decided 2.8psi is probly not a bad place... My idea is to suck thru the st...

dvk-kp

Gidday guys, I'm starting work on supercharging my 3.5 pajero and was looking around the shed for some pulleys that could be suitable... Found a couple and used a calculator online and need to know if I've used it right... Drive pulley is 160mm OD Driven pulley is 110mm OD. Which makes a pulley rati...

dvk-kp

Me and a few mates all have pajeros and had heaps of those motors without cracking blocks, sometimes they are well in the red on the temp gauge and then straight into the river to cool them down and they are mint. Great motor in my opinion, maybe not the most powerful but go hard and love to rev and...

dvk-kp

Cool sounds good. Like saving money.

Do you just buy off eBay?

dvk-kp

Cool thanks Njv6, do you mean oem Mitsi stuff?

Thanks

dvk-kp

Is this on ya paj? If so, what sort of bushes did you go with? And did you do diff end and chassis end?

I need to do mine also, Superpro ones off trademe are fairly pricey tho.

Thanks

dvk-kp

derk wrote:I see all the internet trolls have found another victim

Hahaha they are all wound up. I didnt for opinions on how I 4wd... Just some wheels. Cheers for your useful input derk, its appreciated.

dvk-kp

I don't have a Facebook.

Sorry I don't conform to your guys "ideal 4wder"... Not

dvk-kp

Yea I don't want a D window, I did but decided to stick with matching then I'll have 11 wheels and tyres and it won't matter what tyres come and go...

dvk-kp

Twodiffs wrote:Gotcha....young and stupid.

Your opinion, I can't hear it over my rev limiter

Haha Cheers derk, I thought that might be the case. But I did see these on trademe...

http://www.trademe.co.nz/Browse/Listing ... 1068995505

Australia made they reckon... Any one had these?

dvk-kp

Doesn't make it wrong either. We only go to private places and the owner knows full well we want to make a mess. I'm not scared of a loss of traction, in fact I prefer it, it's great fun. You 4wd your way and I'll continue to do it my way. I can be sensible at 7500 rpm. All I asked for was some info...

dvk-kp

:roll: I know all that, like I said, I don't have on board air so not going to let them down. Also I didn't ask for anyone's opinion on my 4wding style, I have a huge amount of fun doing some revving and throwing mud round, I've been doing it that way for years. I actually asked about where people b...

dvk-kp

Cool thanks, I'll give them a ring after my tyres arrive and see how good they can make their price, any one used the hyper wheels before? Any feed back? Recommended rim size for the tyres is 15x10 so ill run thos, plus ya have to look cool 8) Plus I don't have on board air so don't get into lettin...

dvk-kp

I haven't popped a tyre off the bead yet. Road pressure off road helps with that, and me and the guys I go out with arnt extreme level winch challenge stuff... Just go for a hoon up rivers and find as much mud as possible etc. road trucks... The tyres are bigger then usual too. Swampers, much bigger...

dvk-kp

Cool thanks, I'll give them a ring after my tyres arrive and see how good they can make their price, any one used the hyper wheels before? Any feed back? Recommended rim size for the tyres is 15x10 so ill run thos, plus ya have to look cool 8) Plus I don't have on board air so don't get into letting...

dvk-kp

Think they are gloss black. Come up good with a clean. No stripes at all. Seem like a decent wheel but I don't know.

dvk-kp

Hi, just brought some more tyres for my Pajero, and will need to sus some rims soon. I will need 6x 15x10s in -44 offset. Where do you guys buy rims? How much? Reasonable quality? Who give good deals considering I'll be buying 6. I'd hate to spend good money and bend them. My current wheels are pict...

dvk-kp

haha my bad... Picture is quite small on a fone!

dvk-kp

Nice truck mate, this wheels in the 3rd picture are awesome. Any idea what they are or specs, offset etc?

dvk-kp

Sorry not a 4wd but someone may want a cheap double ute to hack around in

http://www.trademe.co.nz/Browse/Listing ... 25&ed=true

dvk-kp

Selling my old winch bar. Very strong.

http://www.trademe.co.nz/Browse/Listing ... 22&ed=true

dvk-kp

Awesome thanks mate, sounds easy enough. Will have a look tomorrow after work.

Search found 265 matches

Re: supercharger vacuum

Re: supercharger vacuum

Re: supercharger vacuum

Re: My Pajero build. The Whale mk2.

Re: View active topics button

Re: Supercharger Boost Calculations

Re: Supercharger Boost Calculations

Re: Supercharger Boost Calculations

Re: Supercharger Boost Calculations

Supercharger Boost Calculations

Re: Pajero v6 block cracking?

Re: 23rd April

Re: 23rd April

Re: 23rd April

Re: 15x10 Rims

Re: 15x10 Rims

Re: 15x10 Rims

Re: 15x10 Rims

Re: 15x10 Rims

Re: 15x10 Rims

Re: 15x10 Rims

Re: 15x10 Rims

Re: 15x10 Rims

Re: 15x10 Rims

15x10 Rims

Re: New heap in chch

Re: New heap in chch

Mitsi L200 for sale.

4wd Winch Bar

Re: Windows to work on ACC