Offroad-Express

sibainmud

I have a few solutions guys :P Nath, get a V6 driveshaft (about 50mm **edit* 20mm** :oops: shorter) and with the smaller diameter, thicker walled tube. Josh, run a 4.6 speedo drive with 4.8 diffs on 33's the speedo reads about right (+/- 5% @ 100km) Got to love Nissan interchangeability 8) All of th...

sibainmud

Well all I can say is there one strong as 4 wheel drive my story would be to long to tell. only problem is the gearbox can go same with the outo its just time we all getting older but theres many around doing big miles.....I had a 1991 2.4 d surf I now have a 1991 terreno 2.7 d its got more power i...

sibainmud

Yeah.....bit of a mission :roll: When I did mine, the electronic sender wouldn't come out, so ended up smashing it to bits and removing what was left by taking the transfer housing off and punching it inwards. My tip would be, rotate it first to help break the seal of the O ring. You will need a mec...

sibainmud

A huge thanks to all who worked at making The Night Run a major success. Every paying driver had a huge smile on their faces at the end. Some of the stories would make great fishing stories. 35 or so trucks turned up and everyone had a ball. We got $85 from the sausage sizzle too. A big thanks to a...

sibainmud

LOLYF wrote:
sibainmud wrote:CHASSIS
AUTO
MANUAL

You forgot TERRANO

sibainmud

CHASSIS

AUTO

MANUAL

sibainmud

Intercooler is currently in the back of my truck up north, so it won't be until after the weekend.
Stand by.

Cheers,

sibainmud

The two hoses that you see are the standard ones off the mistral. They do have different manifolds and the later model garret turbo. I did mine this way apart from my tubes , everything else is standard factory. Makes for easy replacements as I seem to need from time to time

Cheers

sibainmud

Made the pipes. Drill and tap somewhere easy to get to and that is where the boost compensator and aftermarket gauge are plumbed in.
Here's a pic showing the mock up.

Cheers,

sibainmud

Spend most of the weekend eating dirt under my truck... Spent Sunday doing the same thing.....same flavour too :lol: :lol: Didn't get a chance to clean it after Possum Palace so had plenty of different flavors falling in my mouth :lol: Went to Possum Palace to replace blown turbo on T2. It was REAL...

sibainmud

Nice work! I can vouch for all the upgrades

Should be a good multi-use truck by the end. You won't regret the gearbox.
Will be fun to peel off boy racers....at least until 2nd gear

Keep it up.

Cheers,

sibainmud

Yeah...ha ha. TD, aka Steve said, why don't you spend more and get a custom built turbo? When asked how much, $1500-$2000 was the answer. At an average of $100 per standard unit, by my calc's, that pays for 20 turbos. As I'm only up to the fourth in as many years, i think i will stay with standard t...

sibainmud

Also had another awesome weekend at Possum Palace with datsunsafari, mudtroll, and the rest of the team....except sibainmud. Didn't have my truck there as its parked up for some repairs/maintenance/upgrades... Fixed it for ya :lol: :lol: :lol: You know you're going to have to spill the beans sooner...

sibainmud

Thanks for that Cambo. Have bid.
So far in the last couple of weeks, I have got one off a wrecker for $200 and one off TD Power for a measly sum and this one.....hopefully. One replacement and two spares

Cheers for all the eyes out.

sibainmud

Alltech, dude. Wairau Road. Bloody good at that sort of thing and they have their own workshop which is not that common for a fuel specialist.

Cheers,

sibainmud

Yeah shyt yeah. I normally adjust screw with truck running until idle about 1200rpm then have to work out a way of returning the throttle arm back to idle. I find that both cables limit the travel that far. I have adjusted the cable trunnions (nuts) to give as much slack as poss. Totally disconnecte...

sibainmud

Broken shaft so not rebuildable :( Can get a seized one if need be. Trying not to have to modify anything as the truck is up north and I have limited resources up there. Thanks Steve. Shipping will put it up near this one which is local. http://www.trademe.co.nz/motors/car-parts-accessories/nissan/e...

sibainmud

As title says. As cheap as poss. Anywhere considered. Early model one with 3 bolt flange on outlet.

Cheers,

sibainmud

Hand throttle cable travel preventing full return and/or the spring won't return enough.

Cheers,

sibainmud

Friday night, replaced broken spring, http://i896.photobucket.com/albums/ac167/sibainmud/Terrano%20V2/PossumPalacesprings004_zpsdb6f325f.jpg Drove up the back of possum palace, forgot diff lock, switched it on and speared off the track to rest drivers door on a tree :oops: :oops: Now it matchs the p...

sibainmud

Yip. Might be able to get away with 1 inch body lift if not using the fan set up.

Cheers,

sibainmud

Good score :D All bolt on. but you will need to make a tail from the 3 bolt turbo flange to IC. Like this one :wink: http://i896.photobucket.com/albums/ac167/sibainmud/Project%20Intercooler/Intercooler004.jpg http://i896.photobucket.com/albums/ac167/sibainmud/Terrano%20stuff/TerranoMods013small.jpg ...

sibainmud

As above post ,went up north to check out the tracks for the 24hr challenge ,drove,winched ,walked some bloody awsome tracks ,the guys from Norwest have set some top stages , :) if the rest of the stages they set are anything like these we are in for one hell of a comp ...big thanks for my co drive...

sibainmud

Answer is fairly obvious, if the pump goes with the same timing gear then it would make sense to keep the "matched" injectors with the same pump. http://www.offroadexpress.co.nz/Forums/viewtopic.php?f=6&t=36214 Pays to just bump your first thread, than start a new one :wink: Answers ma...

sibainmud

Probably best to keep the gears matched to the pumps. The eti pump may have a different TDC. BTW, have you sorted out the throttle pedal and cable to run the mechanical pump?

Cheers,

sibainmud

Kneadit works great Does it still work at the the bottom of the tank like will it dry with the fuel dripping? Sure will. 2 pack epoxy putty. Once mixed together well, nothing stops it curing. It takes a bit longer in colder climbs. Years ago i used it to fix a corrosion hole in the float bowl of a ...

sibainmud

Yip, that the big one alright. Same price I paid for mine too. Will bolt straight on a TD27 with same flywheel and clutch. For any northerners or people that aren't afraid of some freight, I have a D22 QD32 box here with a jambed up transfer that will be for sale, but only for the next week or so. $...

sibainmud

When I changed rear diff from drums to drum/disc combos the brakes worked great with the same master cylinder. I wound think a D21 Navara would be the same. Offer is there to find one here and send over to you.

Cheers,

sibainmud

Got a new ute today, looking forward to doing small mods on it to make it look tidy such as alloys, paint the front bumper, etc. it's the 2.7 petrol so i've heard they are pretty reliable No lift or bigger tyres? Sure? Was tempted to get a 4wd one... this one will do for a while as cheap to run and...

sibainmud

Sounds like diesel knock. As the others have said, water or contaminante in the fuel/filter or (wild stab in the dark) EGR if they have one. Had same symtoms with some Nissans and as they were manuals we disconnected the TPS to disable the EGR system. Worked a treat.

Cheers,

Search found 1828 matches

Re: Gearbox swap electric to manual speedo?

Re: Gearbox swap electric to manual speedo?

Re: Gearbox swap electric to manual speedo?

Re: Woodhill Night Run Saturday 17th August

Re: has anyone a chassis drawing for a 91 terreno 2.7d

Re: has anyone a chassis drawing for a 91 terreno 2.7d

Re: Intercooler options

Re: Intercooler options

Re: Intercooler options

Re: 20-21 July

Re: Toughening up Terrano WD21 Front End

Re: URGENT WTB Nissan td27 turbo

Re: 13-14 July

Re: URGENT WTB Nissan td27 turbo

Re: LD28T Specialist

Re: D21 Terrano, fast idle after turning fuel screw

Re: URGENT WTB Nissan td27 turbo

URGENT WTB Nissan td27 turbo

Re: D21 Terrano, fast idle after turning fuel screw

Re: 29th - 30th

Re: Good TM Score!

Re: Good TM Score!

Re: 14th - 16th June

Re: td27eti mechanical pump conversion which injectors do i

Re: td27eti convert to mechanical pump?

Re: whats the best petrol tank bush fix

Re: D21 Navara SAS with falcon rear leaves

Re: Terrano Brakes

Re: June 8-9 2013

Re: Turning corners, bumps etc causes a loud rattle from eng