Offroad-Express

Twodiffs

Will be selling complete when it happens.

Twodiffs

Cheers mudlva.

Twodiffs

Looking for indications of what a Safari front diff would be worth pls. Will come with 3.9 ratio from donor diff (diff centre removed), 3 spare drivers side cv's and axles. 2 spare Passenger side cv's and axles. complete with auto/manual hubs. twin pot brakes from a TB42 efi..will take 15" rims...

Twodiffs

bolts over load the PTO box, simple, or do monster overload, blow the casing to bits ask 4WDbits First Nissan for 4 yrs, same HT bolt and shear pin setup - no issues! 2nd Nissan now for 7 years...HT bolt and shear pin setup - no issues! I'll ask 4wdbits what he's doing wrong. I've done trips with n...

Twodiffs

nope , just saving him from laying under his truck to change the pins You don't have to lie under the truck to change the pins...you redrill the first shear pin (gearbox end) out by 1.5mm and put in a high tensile bolt..preferably a hex bolt (allen key style). You leave the shear pin closest to the...

Twodiffs

Oh yeah true, coz your nuts weren't tight enough? It's only happened since new ones gone on. And never had the rear discs off. Tightened em up last night with rattle gun (prob too tight) but yeah still rattle Nope...wheel nuts were good. With the wheel done up tight I could wiggle the disk rotor an...

Twodiffs

Ok...and i'm assuming the wheel is still on tight when you do this test?

I had a similar rattle and the local brake outfit said slider pin, I changed the pin and still had the rattle.
My one was the rear disc wasn't being clamped tightly against the studs. Blimmin rattle annoyed me for months!

Twodiffs

Are you absolutely sure it's the slider pin causing the rattle?
They are cheap to buy on Tme.

Twodiffs

Check the shear pins out. Most people fit an 8mm cap screw for the one nearest the gearbox and a genuine shear pin up front because they are easier to punch out when you snap one And use a nyloc nut on the bolt - also make sure the bolt isn't too long cos it will connect with stuff when the shaft i...

Twodiffs

Mine has bent and been straightened more times than I can remember, Kaiapoi Repowers down here are doing heavy chrome moly rods with GU
ends on them for not too much coin...i'll probably go down that road.

Twodiffs

Not trying to be funny but can someone explain 'triple lockers' for me pls?
A front diff has 1 locker, the rear diff another locker so a vehicle can only be twin locked

.
Nissan driver obviously so don't get it when the yota guys say their 4wd is triple locked??

Cheers

Twodiffs

We are not going in July

.
Plus he's talking about the Godley hut...not the Macaulay.

Twodiffs

Really wish I was up there, i'm pretty sure I've been on a trip with you guys and driven from Pouto and the lighthouse north along the beach and dunes and would love to do it again. I wouldn't hesitate to leave a pet at home for the day either. It was 2006 when I was living in Whangarei and I was s...

Twodiffs

Really wish I was up there, i'm pretty sure I've been on a trip with you guys and driven from Pouto and the lighthouse north along the beach and dunes and would love to do it again. I wouldn't hesitate to leave a pet at home for the day either. It was 2006 when I was living in Whangarei and I was sp...

Twodiffs

Currently have 4" spring lift with long shocks. Should i go 2 or 3" body lift, and where in welly area guys? Mark Atleast 3" is a minimum. Just have to ensure to use h/t bolts and locknuts Be awere of radiator mounts and fan relationships All the rest will be good 8) That's a joke ri...

Twodiffs

Hi guys

Anyone in the Christchurch or North Canterbury area know of a good auto sparky who does house calls?
Have a bit of an issue with the electrics and don't really want to drive it to town.

Cheers.

Twodiffs

Pm coxsy on here or search for his thread...think he put up a complete strip down and rebuild.

Twodiffs

GEEZUS that cruiser is nice!!!

Twodiffs

Good to hear, thanks for the update....were they genuine Nissan ones?

Twodiffs

Well said Flag!!

Twodiffs

Yes but do some homework before you spend more than is necessary, my mounts have been in since 1991 - new OEM mounts and I should get another 20yrs. Plus the heavy duty mounts that are being made (not just by Superior) are so solid that there have been issues reported with vibrations. If in doubt go...

Twodiffs

You will probably work it out but the OZ onlineautoparts gives prices in Aust $, on trademe it's in kiwi $.

Twodiffs

What monstr said, either through the parent website in Aust or trademe.
http://www.trademe.co.nz/stores/onlineautoparts
Their prices are pretty damn good...have been meaning to replace mine as well just for the sake of it.

Twodiffs

For sale AGAIN!! - Vince...what did you do to it brother???????

http://www.trademe.co.nz/motors/used-ca ... 667696.htm

Twodiffs

Too easy mate...you can use your std rotors, I did. Bear in mind those efi rotors and twin pots are on 15" rims

.

Twodiffs

Rotors are discs which are rotors...quality is basic, when mine are at their minimum thickness i might go for slotted rotors.
Still have standard rotors even though their thickness will be down from factory and with the twin pot efi calipers I can stamp on the pedal
and lock everything up.

Twodiffs

Twin piston GU will be suitable for 16" rims only, also the bolt pattern of the calipers will not match GQ diffs.

Twodiffs

Possibly well enough for a cert coxsy..maybe even go slotted front rotors, but nothing beats twin pot calipers even though the twin pot pistons from an efi42 are smaller than the oem GQ single jobbie. Keep your sliders lubed and make sure the proportional valve is adjusted accordingly. To do better ...

Twodiffs

Don't give up..they're hens teeth and hard to find but well worth it

.

Twodiffs

Took me 8 months to finally source twin pot calipers from an efi..that was hassling wreckers every 2 weeks.
Well worth the effort, straight bolt on to 15" rims etc and I can lock up 37's.

Search found 555 matches

Re: Safari front diff, spare cv's and twin pot stoppers

Re: Safari front diff, spare cv's and twin pot stoppers

Safari front diff, spare cv's and twin pot stoppers

Re: wanted:nissan safari pto winch or high mount

Re: wanted:nissan safari pto winch or high mount

Re: Rattly rear calipers GQ

Re: Rattly rear calipers GQ

Re: Rattly rear calipers GQ

Re: Y60 PTO Winch

Re: GQ tie rod upgrade?

Re: Oil coming out of top of diff breathers?! help

Re: anyone keen for a godley trip mid July

Re: Fundraiser trip to Pouto Feb 28th 2015

Re: Fundraiser trip to Pouto Feb 28th 2015

Re: Body lift gq swb

Auto sparky - mobile

Re: safari PTO Winch

Re: Trademe auctions (interesting TM auctions)

Re: TD42 engine mounts

Re: 1080 carcus cleanup

Re: TD42 engine mounts

Re: TD42 engine mounts

Re: TD42 engine mounts

Re: Trademe auctions (interesting TM auctions)

Re: Wtd: GQ 2 pot calipers and rotor

Re: Wtd: GQ 2 pot calipers and rotor

Re: Wtd: GQ 2 pot calipers and rotor

Re: Wtd: GQ 2 pot calipers and rotor

Re: Wtd: GQ 2 pot calipers and rotor

Re: Wtd: GQ 2 pot calipers and rotor