Offroad-Express

nizute

Ok that's interesting,its running standard boost and fuel pump was set to factory setting when rebuilt.
Any idea why it would be that hot?

nizute

Where the probe sits.

nizute

Sorry should have put that the pyro probe is in the manifold before the turbo , its just before the outlet port to the turbo.

nizute

Well i am very impressed, drove it to work this morning (spent most of the drive watching the gauges) and it goes like stink!!! It would be on par with my bosses 2003 holden rodeo now, what are peoples egt temps? mine cruising at 100 @3000rpm is around 400deg and giving it shit about 6-700deg is tha...

nizute

Yea its a Hitachi(sp) so more expensive to rebuild but apparently got a thicker shaft and fixed thrust bearing not floating,not sure if the garrets do but am going to get one as a spare.

nizute

this is my first diesal project its going to be used for light offroading to get to hunting areas and used around the farm, this is the first stage, rebuilt fuel pump and injectors,turbo manifolds and made a dump pipe and bought a k&n apollo to try,it looks a lil to flash for the ute but took it...

nizute

Looking good !!! Have you used the rancho's shock before ? how good are they?

nizute

All of the above options can go top or bottom of the spring as long as its not a tapered spring.

nizute

I desided to turbo my n/a navara ute, rebuilt and fitted the diesel pump and injectors and made dump pipe,just waiting on egt gauge and need to do a service.

nizute

Pull the drums off check that there is no leaks from wheel cylinders or axle seals, if all good then check operation by using two large screwdrivers on either side of the shoes and someone pushing slowly down on the pedal(make sure you do this one side at a time or you will pop the cylinders ) If ev...

nizute

i would check your driveshaft hanger bearing if it has one.

nizute

Have you pulled the gear selector out of the top of the box?
It sounds like its stuck in gear and the selector fork may have come off the shaft?

nizute

callum007 wrote:how complete is the motor?

engine is gone just got running gear and body parts left

nizute

hey guys if anyone needs any more parts let me know i have a scrap bin for the week and the scrap metal man is coming early next week.
Cheers

nizute

If you can paint from a gun i would recommend a good etch primer and 2pack enamel.

nizute

done mine and taken it into the local hunting shops and they hadn't heard anything about it.
the disapointing thing looking at some of the hunting and shooting forums is that some of the people who dont have a semi with a pistol grip dont care, i think everyone should send a submission in!!!!

nizute

If you can't read any of it just ask.

nizute

yea not a problem i will put up a drawing tonight,i used 25mm barstock and the thread is 10x1.5 factory it is 8x1.25.

nizute

Finished making the pin, made it a lil stronger that standard.

nizute

If you know any panelbeaters,get them to do the job so you have a paper record if you ever get pinged on it for a wof, or tack the box section in and get a certified welded to finish it.

nizute

Yea if you can? Will it fit straight on?

[/quote]

yea i will spin up a copy of mine.[/quote]

F%#@^&@^ LEGEND

Let me know how much I owe ya[/quote]

I will add it to your tab

nizute

BogBoy wrote:
nizute wrote:do you want me to spin you up one? i can send it down with your other parts.

Yea if you can? Will it fit straight on?

yea i will spin up a copy of mine.

nizute

a gps navigation system that also shows speed is not allowed but a dedicated speedo that is hard wired and unable to be removed is allowed!!!!!!! if you dont believe me you are more than welcome to ring VTNZ!

nizute

as a wof inspector it is legal (we use them for the hot rods)but if you get pulled over by the police not having a odometer connected for RUC will get you in trouble. but just put any speedo drive in so it logs some km and use the gps unit for your road speed.

nizute

are you running factory MAP sensor or air flow meter ?and factory O2 sensors?

nizute

1st one but make a hard top for the tray so you can keep stuff dry and secure.

nizute

put a aftermarket gps speedo in then if you put big tyres on it you dont have to worry about recalibration.

nizute

do you want me to spin you up one? i can send it down with your other parts.

nizute

you could buy my bare chassis and have a play

nizute

RJT wrote:All standard for now. Not doing the tough stuff but would like to carry spares just in case. It's a '92.

pm sent

Search found 171 matches

Re: My hunting/farm ute

Re: My hunting/farm ute

Re: My hunting/farm ute

Re: My hunting/farm ute

Re: My hunting/farm ute

My hunting/farm ute

Re: Tomsoffroad & Customs

Re: GQ coil spring pads/cushions

Re: 21st & 22nd September

Re: Failed Warrant - rear brakes

Re: Deep noise during initial acceleration (5spd Terrano)

Re: Gear problem with '93 2.7TD Terrano

Re: terrano parts

Re: terrano parts

Re: 'Tuff Lux's LN106 4 link

Re: Your Last Chance to Save Our Pistol Grips

Re: D21 Steering Damper Pin..................AGAIN

Re: D21 Steering Damper Pin..................AGAIN

Re: D21 Steering Damper Pin..................AGAIN

Re: Bit Of Advice.....

Re: D21 Steering Damper Pin..................AGAIN

Re: D21 Steering Damper Pin..................AGAIN

Re: Gearbox swap electric to manual speedo?

Re: Gearbox swap electric to manual speedo?

Re: Holden v6 - overfuelling after conversion

Re: Disco ute chop advice

Re: Gearbox swap electric to manual speedo?

Re: D21 Steering Damper Pin..................AGAIN

Re: has anyone a chassis drawing for a 91 terreno 2.7d

Re: terrano parts