looking at grabbing stuff from http://www.china4x4offroad.co

User avatar
churchill
Hard Yaka
Posts: 1128
Joined: Thu Nov 11, 2010 7:28 pm
Location: Auckland

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby churchill » Fri Apr 08, 2011 7:47 pm

tgaguy1 wrote:I will take a front and rear locker for my patrol

RD 78A front
RD 24 Rear

Do they come with compressors or are they purchased separately. I couldn't find an answer to this on the site.

Cheers

Jase.


When I bought mine I paid $450USD for the locker and compressor. Supposedly they come as a kit so I would suspect you'll get 2 compressors with two lockers.

User avatar
muskie
Hard Yaka
Posts: 654
Joined: Mon Jul 10, 2006 12:00 pm
Location: Te Awamutu

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby muskie » Sun Apr 10, 2011 4:09 pm

williamhamilton wrote:I will see what I can pull together.

I have to work through freight and get some prices for that - any pointers for this welcome.

As for bits from China offroad there is a min purchase amount so will need to be good interest if winches/lockers etc are wanted - I am grabbing small bits at the moment so easy to get min orders sorted on those.

Winches and lockers I think are min of 10 - I will confirm tomorrow.

W


confirmed locker numbers and have emailed you, RD136 front and RD135 rear with 24VOLT compressor.

User avatar
muskie
Hard Yaka
Posts: 654
Joined: Mon Jul 10, 2006 12:00 pm
Location: Te Awamutu

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby muskie » Sun Apr 10, 2011 4:13 pm

tgaguy1 wrote:I will take a front and rear locker for my patrol

RD 78A front
RD 24 Rear

Do they come with compressors or are they purchased separately. I couldn't find an answer to this on the site.

Cheers

Jase.


these have aparently been superseeded by rd135 and 136..

User avatar
tgaguy1
Hard Yaka
Posts: 746
Joined: Sat Dec 24, 2005 12:00 pm
Location: Tauranga

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby tgaguy1 » Sun Apr 10, 2011 4:59 pm

muskie wrote:
tgaguy1 wrote:I will take a front and rear locker for my patrol

RD 78A front
RD 24 Rear

Do they come with compressors or are they purchased separately. I couldn't find an answer to this on the site.

Cheers

Jase.


these have aparently been superseeded by rd135 and 136..

Good to know. Thanks
William, I need 12 volt compressors. Thanks.

User avatar
williamhamilton
Hard Yaka
Posts: 763
Joined: Sun Jan 21, 2007 12:00 pm
Location: Wairarapa
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby williamhamilton » Sun Apr 10, 2011 8:04 pm

williamhamilton wrote:So far I have:
WJW
SZ803631-2M Length - Tree Saver
HD9920060001J1 - light rack

MNC
X8288 Winch - looks like different supplier
SZ-880088I - Synthetic rope 12mm

DACE
SZ-880088F x30metres - Synthetic rope 9.5mm

FLYINGBRICK
SZ-120 - double cylinder compressor - 2 of

ZUKMEISTER
5 16x6" rims in 5x139.7 stud pattern

TGAGUY
RD 136
RD 135
12V Compressor

MUSKIE
RD 136
RD 135
24V Compressor

T-BOON
TD45C4 Fridge
TD20C4 Fridge
Toyota Hilux wheel Arch Flares
RTT-009 - rooftop tent

WISARD2
RD46 locker


W
Last edited by williamhamilton on Mon Apr 11, 2011 9:54 am, edited 1 time in total.

wisard2
Hard Yaka
Posts: 523
Joined: Thu Feb 14, 2008 11:10 am
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby wisard2 » Mon Apr 11, 2011 1:24 am

Hi William, could you please price an RD46 air locker for a Pajero. Thanks,
Ryan.
92 swb Pajero ute. 3 litre V6 manual. 33" Mud wranglers, Diff breathers, Snorkle, 9500lbs electric winch, Rear diff lock, CB & PRS radio's.

User avatar
muskie
Hard Yaka
Posts: 654
Joined: Mon Jul 10, 2006 12:00 pm
Location: Te Awamutu

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby muskie » Sun Apr 24, 2011 7:33 pm

any news on this?? prices or availability?

User avatar
williamhamilton
Hard Yaka
Posts: 763
Joined: Sun Jan 21, 2007 12:00 pm
Location: Wairarapa
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby williamhamilton » Sun Apr 24, 2011 8:11 pm

muskie wrote:any news on this?? prices or availability?


Last three emails have gone unanswered by them - may have to see what response I get if I call.

Have a couple of other suppliers for the stuff I wanted but not lockers sorry. Steve at 4wdFibreglass brings these in and sells a good range - not sure on his prices through sorry.

W

User avatar
muskie
Hard Yaka
Posts: 654
Joined: Mon Jul 10, 2006 12:00 pm
Location: Te Awamutu

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby muskie » Mon Apr 25, 2011 8:17 pm

williamhamilton wrote:
muskie wrote:any news on this?? prices or availability?


Last three emails have gone unanswered by them - may have to see what response I get if I call.

Have a couple of other suppliers for the stuff I wanted but not lockers sorry. Steve at 4wdFibreglass brings these in and sells a good range - not sure on his prices through sorry.

W



ok mate no worries, thanks for trying, steves prices are silly money, almost $1500 bucks each, if i was going to pay that much i may aswell buy ARB lockers..

User avatar
Dace
Hard Yaka
Posts: 981
Joined: Fri May 04, 2007 12:00 pm
Location: Te Horo, Kapiti

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby Dace » Wed Jun 29, 2011 8:17 pm

Hey William, are you still pursuing this?

If so, I think I should upgrade my winch rope size to either
SZ-880088H 30m
or
SZ-880088I 30m

Cheers
Dace
Got a Daihatsu Something, hasn't got a Daihatsu engine.... or diffs.... and it doesn't have windows.... or doors.... but its got tyres.... :)

Return to “4WD Parts”

Who is online

Users browsing this forum: No registered users and 12 guests