Cheap Exhaust bends?

[Dirtydog]

Hey guys on the look out for some cheap 3" exhaust bends

so far ive been finding $50 bucks, and im sure ive seen some cheaper.

i will need 6x 45 degree bends,

and 2x 90 degree bends.

even if someone is keen to make some up for me. mandrel or crushed, aslong as they are not too restrictive.

price difference between 3" and 2.5" is bugger all, so going to go 3 inch.

also after a cheap 3 inch muffler.

cheers for any help guys

[muddyhilux]

chase distributors is who i use,sure they're cheaper than others.or have you considered buying a donut and just just out what you need,cheaper again,or they do a multi bend thing with strait 90s 45s etc all in one

http://www.chase.co.nz/acatalog/Accessories.html

[rangimotors]

Hey guys on the look out for some cheap 3" exhaust bends

so far ive been finding $50 bucks, and im sure ive seen some cheaper.

i will need 6x 45 degree bends,

and 2x 90 degree bends.

even if someone is keen to make some up for me. mandrel or crushed, aslong as they are not too restrictive.

price difference between 3" and 2.5" is bugger all, so going to go 3 inch.

also after a cheap 3 inch muffler.

cheers for any help guys

Give atlas steel a call they should be less than half that cost for a 90

[nismo26]

I got a 3inch 90 from Chase for $22 inc Gst the other day.

[kbushnz]

If you were in Auckland I would say STA Parts, http://www.staparts.co.nz/contact.php
Cheaper than Chase.....
Not sure if they will ship... But that could kill the deal...
About $16.00 all up for a 90 Deg 3 in...
http://www.staparts.co.nz/product_13_HEADER.php

[Dirtydog]

cheers for all the info guys,

managed to find an old tractor muffler for 40 bucks, gunna fit the bill good.

looks like sta parts are the way to go, freights only 20 bucks to here. so good as.

looks like it will be cheaper to buy 5 90's than 6 45's and 2 90's, so thats the way to go.

[Heath]

IS this progress on the rod?

[Dirtydog]

nope this is for my truck, rods after this lol.

have decided on engine though, which will be followed by 3 inch exhausts and stacks, or lake pipes havn't decided.