Well, doing the final clearout of the shed and I have the following trucks in various states of repair that need to go, and need to go fairly quickly.... so if anyone here want's some or all of them, let me know.
http://www.4wdstuff.co.nz/shed4sale <--- Details and more pics here...
Firstly, LN61 Surf. White, rusty body, blown and partially disassembled engine, 4 alloys with 31x10.5 tyres (2 good tread, 2 probably just warrantable), windscreen intact, 5 speed W56 box and transfer, axles in place but no rear diff (4.3 ratio front). Good for wide axle conversion for a Hilux? Hubs in front and wide rear axle are mostly all you need. Rear door and glass is there, but no front doors or guards. No plates, dead reg and good for parts or offroad build only. Offers via PM, pickup chch only
Second, RN46 double-cab ute shell. This was going to be my rockcrawler project base but I just don't have the time or inclination (or space) for it any more. These are getting hard to find now, and with the exception of a missing rear left hand door and all the seats (I have Isuzu seats I was going to use as they are comfy as hell) the cab is mostly complete. No windscreen, no bonnet... no lots of things... Offers via PM, pickup Chch only
Third, the MU! Solid axle converted, but Its a shell - no engine, box, axles etc... but the loom and fuel system etc is all there... dead reg. 1996 model, so later 'wizard' style interior (which could be retro-fitted to an earlier model). I have a petrol dash for it as well if someone wanted to fit a V6 (I had planned to put a 3.8 Commodore V6 into it) or its factory set up for a 3.1 turbo diesel at the moment. If someone out of Chch wanted it then we could negotiate some axles so it was mobile and then you could have Jeffs come and collect it.
Fourth, the drivetrain from the Hilux - 6M-GE engine complete, with spare block. Dual transfers and 5-speed. $600 for the 6M with bellhousing, flywheel etc and $900 for the gearbox and duals all set up ready to go.
Everything else in the shed is probably for sale as well... shelving, parts, lots of stuff. I'll have some pics up on my site shortly and I'll link 'em back here when they are up. PM me an offer if you want any of it.
Steve
4WD Stuff Final Cleanout - 3 trucks... and other bits.
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
The link doesnt work
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
tallsam66 wrote:The link doesnt work
x2
92 swb Pajero ute. 3 litre V6 manual. 33" Mud wranglers, Diff breathers, Snorkle, 9500lbs electric winch, Rear diff lock, CB & PRS radio's.
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
Thanks Smurf, I typed it and never checked it... something to be said for copy / paste
Steve
Steve
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
ive asked ya once before, but ill double check, and chance you got rear extended shackles for yn60 amoungst that shed?
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
One set of plates sitting on the shelf at the moment... you could use them to make your own (bit of fiddling about pulling the pins from your shackles and pressing them into the new plates - making a spacer/brace etc)
PM me for details...
Oh - and I found a set of spacers for Nissan front radius arms (12mm). I manufactured a few sets a while back then put them somewhere safe... I'm now starting to find all those things I put in safe places over the last few years
Steve
PM me for details...
Oh - and I found a set of spacers for Nissan front radius arms (12mm). I manufactured a few sets a while back then put them somewhere safe... I'm now starting to find all those things I put in safe places over the last few years
Steve
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
PM sent steve
Its NOT a whale !!!!!!!!!!!!!!!! more like a large seal
(021) 02388443
(021) 02388443
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
PR replied PM (or vice versa )
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
Update - White surf gone, parts washer gone, gearboxes gone... still have the RN46 d-cab shell, a set of Isuzu Bighorn (later model, not recaro) seats (can be seen in the RN46 pic), a 2LT flywheel, a 5M flywheel and clutch/pressure plate, the 6M and 5speed/dual transfers and a few other random bits around the place...
Oh, and can I just add... its first in, first served - I have a week to get cleared out and out of the shed (I'm paying rent for a lot of storage at the moment) so if you miss out on something then I apologise, but thats just how it is... I need it all gone.
Steve
Oh, and can I just add... its first in, first served - I have a week to get cleared out and out of the shed (I'm paying rent for a lot of storage at the moment) so if you miss out on something then I apologise, but thats just how it is... I need it all gone.
Steve
- muddyhilux
- Hard Yaka
- Posts: 1307
- Joined: Wed Oct 04, 2006 12:00 pm
- Location: auckland
- Contact:
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
hi mate,if still available what ya asking for the 4.88?cheers
1990 surf 350 chevy jacked up and currently under construction again
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
Dont Suppose you have a low profile cross member for a KZN-130 Surf lying about in thier.
LR110 ..... LJ50 project
Chris.
Chris.
Re: 4WD Stuff Final Cleanout - 3 trucks... and other bits.
dammit if you werent so far away i would buy that 6m
Who is online
Users browsing this forum: No registered users and 30 guests