40in tahs

User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

40in tahs

Postby haynzy » Thu Aug 12, 2010 7:40 pm

quick probe on how much work is involved in puttin 40's on a vitara?
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.

User avatar
Beer_Cruiser
Hard Yaka
Posts: 857
Joined: Tue Jun 05, 2007 12:00 pm
Location: now in B O P

Re: 40in tahs

Postby Beer_Cruiser » Thu Aug 12, 2010 7:45 pm

Lots....

User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: 40in tahs

Postby haynzy » Thu Aug 12, 2010 7:51 pm

Beer_Cruiser wrote:Lots....

well thats helpful :roll: :mrgreen:
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.

chevrolux
Hard Yaka
Posts: 294
Joined: Tue May 12, 2009 10:42 pm
Location: Palmy north

Re: 40in tahs

Postby chevrolux » Thu Aug 12, 2010 7:58 pm

i was thinking about suzuki's the other day and found some cool stuff on trademe. After only owning toyotas i looked at a couple of samurai's (sj80 i think?). all coil sprung and solid axles (i didnt know this). Im quite keen to find one of them and just rip the body and bolt a roll cage to it then chuck some ridiculous tyres on it and get the crawler gears in the transfer case and you have a super light, kind of amazing 4x4. so to answer your question, i would say its easy! Just pull the body off.

User avatar
skid
Tyre Man
Posts: 6309
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: 40in tahs

Postby skid » Thu Aug 12, 2010 8:06 pm

reckon if ya gonna put wide diffs under it like 80 series or nissan GU, then the tahs wont be a problem, co they will stick out that far they wont touch a thing :lol: :lol:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*

User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: 40in tahs

Postby haynzy » Thu Aug 12, 2010 8:11 pm

skid wrote:reckon if ya gonna put wide diffs under it like 80 series or nissan GU, then the tahs wont be a problem, co they will stick out that far they wont touch a thing :lol: :lol:

yep or I could get some 300mm spacers made up, think the biggest you can buy is 50mm anyone know a goo engineer?
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.

User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Re: 40in tahs

Postby turoa » Thu Aug 12, 2010 8:11 pm

skid wrote:reckon if ya gonna put wide diffs under it like 80 series or nissan GU, then the tahs wont be a problem, co they will stick out that far they wont touch a thing :lol: :lol:


Stock vitaras are wider than stock hiluxes so they wont stick out that much

User avatar
NJV6
Hard Yaka
Posts: 2749
Joined: Mon Nov 15, 2004 12:00 pm
Location: Southland
Contact:

Re: 40in tahs

Postby NJV6 » Thu Aug 12, 2010 8:23 pm

SWB V6 Paj with one or two mods ;)

User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: 40in tahs

Postby haynzy » Thu Aug 12, 2010 8:31 pm

NJV6 wrote:Just use paper clips. As per http://www.offroadexpress.co.nz/Forums/ ... 49&t=8999&

would do mate but dont wanna add that much weight, would that thin fuse wire suffice?
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.

User avatar
LOLYF
Hard Yaka
Posts: 712
Joined: Fri Feb 03, 2006 12:00 pm
Location: west auckland

Re: 40in tahs

Postby LOLYF » Thu Aug 12, 2010 9:28 pm

turoa wrote:
Stock vitaras are wider than stock hiluxes so they wont stick out that much


Wrong.

Vitara front 1395mm
Hilux front 1420

Vitara rear 1400
Hilux rear 1400
:D :D

User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Re: 40in tahs

Postby turoa » Thu Aug 12, 2010 9:34 pm

LOLYF wrote:
turoa wrote:
Stock vitaras are wider than stock hiluxes so they wont stick out that much


Wrong.

Vitara front 1395mm
Hilux front 1420

Vitara rear 1400
Hilux rear 1400
:D :D


close enough :wink:

User avatar
lilpigzuk
Tiger Balm
Posts: 2312
Joined: Mon Dec 09, 2002 12:00 pm
Location: Counties

Re: 40in tahs

Postby lilpigzuk » Thu Aug 12, 2010 9:47 pm

chevrolux wrote:i was thinking about suzuki's the other day and found some cool stuff on trademe. After only owning toyotas i looked at a couple of samurai's (sj80 i think?). all coil sprung and solid axles (i didnt know this). Im quite keen to find one of them and just rip the body and bolt a roll cage to it then chuck some ridiculous tyres on it and get the crawler gears in the transfer case and you have a super light, kind of amazing 4x4. so to answer your question, i would say its easy! Just pull the body off.


SJ80 were the shitist of them all (mudslut will disaprove :lol: ) dont flex - for a coil sprung vehicle and had weaker running gear.
Last edited by lilpigzuk on Fri Aug 13, 2010 6:41 am, edited 1 time in total.

User avatar
lilpigzuk
Tiger Balm
Posts: 2312
Joined: Mon Dec 09, 2002 12:00 pm
Location: Counties

Re: 40in tahs

Postby lilpigzuk » Thu Aug 12, 2010 9:50 pm

a build Ive been watching on pirate might give you an insight. Piece of piss if you work for a specialist and handy with the welder - his welds are 8)

http://www.pirate4x4.com/forum/showthread.php?t=851529

User avatar
UBZ
Hard Yaka
Posts: 1633
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Re: 40in tahs

Postby UBZ » Fri Aug 13, 2010 12:54 am

haynzy wrote:quick probe on how much work is involved in puttin 40's on a vitara?


Just cut the guards and your sweet :mrgreen:

Image
LR110 ..... LJ50 project :roll:
Chris.

User avatar
badnuz
Hard Yaka
Posts: 2367
Joined: Sat Aug 11, 2007 12:00 pm
Location: Melbourne
Contact:

Re: 40in tahs

Postby badnuz » Fri Aug 13, 2010 9:11 am

:shock: fawk cool!
i used to Cruise, now i PATROL

User avatar
Landy Rover
Hard Yaka
Posts: 263
Joined: Fri Dec 12, 2008 12:11 pm
Location: Feilding

Re: 40in tahs

Postby Landy Rover » Fri Aug 13, 2010 9:49 am

Must have a good chainsaw motor to turn those :wink:
S3 Rover truck cab, injected 186, Sals rear,Toyota P/steer, Safari disc brakes front, R/Rover D/brakes rear, 9500 winch,twin optima batts, roll bar, Disco seats, 33" JTs, scene lamps, onboard air, Front ARB locker.

User avatar
Heath
Hard Yaka
Posts: 3297
Joined: Thu Dec 12, 2002 12:00 pm
Location: Rolleston, Chch

Re: 40in tahs

Postby Heath » Fri Aug 13, 2010 5:49 pm

lilpigzuk wrote:a build Ive been watching on pirate might give you an insight. Piece of piss if you work for a specialist and handy with the welder - his welds are 8)

http://www.pirate4x4.com/forum/showthread.php?t=851529


That's cool!!! 8)

User avatar
DMcCready
Hard Yaka
Posts: 279
Joined: Thu Feb 18, 2010 2:40 pm
Location: Wellington

Re: 40in tahs

Postby DMcCready » Fri Aug 13, 2010 9:34 pm

Awsome idea!

With a gas axe and a BFH you can make anything fit :mrgreen:

Ive seen a vitara at rallywoods with iroks ( photos from when Jafa took his hilux there). If anyone knows it? 40's or only 37's?
There's gotta be some rocks round here SOMEWHERE!

User avatar
skid
Tyre Man
Posts: 6309
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: 40in tahs

Postby skid » Fri Aug 13, 2010 10:35 pm

DMcCready wrote:Ive seen a vitara at rallywoods with iroks ( photos from when Jafa took his hilux there). If anyone knows it? 40's or only 37's?



lol, baby 36s
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*

User avatar
mroffroader
Hard Yaka
Posts: 2330
Joined: Sat Mar 25, 2006 12:00 pm
Location: Lower Hutt WELLINGTON :D
Contact:

Re: 40in tahs

Postby mroffroader » Sat Aug 14, 2010 1:38 am

skid wrote:
DMcCready wrote:Ive seen a vitara at rallywoods with iroks ( photos from when Jafa took his hilux there). If anyone knows it? 40's or only 37's?



lol, baby 36s


AH HEM they were MASSIVE 36's thank you very much skiddy! :lol:

I was running prado diffs front and rear and yea, with alot of guard chopping you could run 40s....
80 series tow bus towing a redneck ass vitara :D

User avatar
mudslut
Hard Yaka
Posts: 221
Joined: Tue Mar 17, 2009 9:09 pm
Location: Hamilton

Re: 40in tahs

Postby mudslut » Sat Aug 14, 2010 5:59 pm

SJ80 were the shitist of them all (mudslut will disaprove :lol: ) dont flex - for a coil sprung vehicle and had weaker running gear.[/quote]

I will treat that with the ignorance it deserves Rex :lol: :lol: :lol:

User avatar
DMcCready
Hard Yaka
Posts: 279
Joined: Thu Feb 18, 2010 2:40 pm
Location: Wellington

Re: 40in tahs

Postby DMcCready » Sat Aug 14, 2010 7:17 pm

mroffroader wrote:
skid wrote:
DMcCready wrote:Ive seen a vitara at rallywoods with iroks ( photos from when Jafa took his hilux there). If anyone knows it? 40's or only 37's?



lol, baby 36s


AH HEM they were MASSIVE 36's thank you very much skiddy! :lol:

I was running prado diffs front and rear and yea, with alot of guard chopping you could run 40s....



haha jeez they looked massive in the photos. Sweet looking truck though
There's gotta be some rocks round here SOMEWHERE!

User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Re: 40in tahs

Postby turoa » Sat Aug 14, 2010 7:51 pm

DMcCready wrote:
mroffroader wrote:
skid wrote:

lol, baby 36s


AH HEM they were MASSIVE 36's thank you very much skiddy! :lol:

I was running prado diffs front and rear and yea, with alot of guard chopping you could run 40s....


until you saw it up close :lol:
haha jeez they looked massive in the photos. Sweet looking truck though

Return to “Projects / Mod's”

Who is online

Users browsing this forum: No registered users and 14 guests