safaripetes zook
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
safaripetes zook
after taking the 80 out on a few trips i figured its too big for most tracks and didnt want to bang it up too much sooo
went down to masterton today with an empty trailor and was followed home by this:
will be a very slow build
Last edited by safaripete on Sat May 07, 2011 1:32 pm, edited 1 time in total.
Re: safaripetes zook
safaripete wrote::shock:
went down to masterton today with an empty trailor and was followed home by this:
all i can see on the trailer is nothing, Oh i cant even see the trailer
need a pic
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
yea yea was waiting for that haha mrs had the camera
pics up now
pics up now
Re: safaripetes zook
Nice one
That should keep you busy
That should keep you busy
1988 Range Rover Classic
2010 Discovery 4 HSE 5.0 V8
[img]http://i251.photobucket.com/albums/gg303/eastw77/2_zpse514cc6c.gif[/img]
2010 Discovery 4 HSE 5.0 V8
[img]http://i251.photobucket.com/albums/gg303/eastw77/2_zpse514cc6c.gif[/img]
Re: safaripetes zook
when you put the commy v6 in i will have the 1600 please =D
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
chevrolux wrote:when you put the commy v6 in i will have the 1600 please =D
the 1600 is spoken for and dead as a door knob with a nice big hole in the block
sorry
Re: safaripetes zook
if you are after a commie v6 i have one that was going to be put into my hilux but have changed plans, has two looms,2 ecus 2 alternators all for $300
-
- Hard Yaka
- Posts: 184
- Joined: Thu Nov 19, 2009 12:24 pm
- Location: Feilding
Re: safaripetes zook
Haha Is This what your fitting the 40 series cruiser diff into Pete Bloody wicked
Real men drive swb leaf spring trucks
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
monaro427 wrote:if you are after a commie v6 i have one that was going to be put into my hilux but have changed plans, has two looms,2 ecus 2 alternators all for $300
where are ya? and do ya have a trans aswell??
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
redz driver wrote:Haha Is This what your fitting the 40 series cruiser diff into Pete Bloody wicked
yeah thats tha plan at this stage
Re: safaripetes zook
safaripete wrote:redz driver wrote:Haha Is This what your fitting the 40 series cruiser diff into Pete Bloody wicked
yeah thats tha plan at this stage
Like
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
- flyingbrick
- Hard Yaka
- Posts: 1725
- Joined: Sun Jan 18, 2009 7:36 pm
- Location: Hamilton/Auckland
- Contact:
Re: safaripetes zook
lincooln wrote:safaripete wrote:redz driver wrote:Haha Is This what your fitting the 40 series cruiser diff into Pete Bloody wicked
yeah thats tha plan at this stage
Like
me too
phone Ross Bolus (secretary of the BOP club) He'll save you.
Re: safaripetes zook
no trans, i am in tauranga
Re: safaripetes zook
A 40 series rear end in narrower than the standard one
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
but im not running a 40 rear
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
pulled the motor out tonite
gearbox and transfer will come out tomorrow
gearbox and transfer will come out tomorrow
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
gearbox and transfercase is now out
time to start cutting mounts off and preparing for things to come
time to start cutting mounts off and preparing for things to come
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
argh fine haha
forgot to drain the transfercase haha woops when pulled the driveshaft out out came tha oils lol
forgot to drain the transfercase haha woops when pulled the driveshaft out out came tha oils lol
Re: safaripetes zook
are you selling the gearbox or has it gone already?
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
not alot been happening with this
so far been colecting bits an pieces
front and rear hilux diffs
transfercase from a bighorn
have brought a whole vn v6 commodore wagon for the motor and trans an other bits i can use
tonight i managed to remove the rear diff from tha zook in preparing the hilux one to go in
no pics
so far been colecting bits an pieces
front and rear hilux diffs
transfercase from a bighorn
have brought a whole vn v6 commodore wagon for the motor and trans an other bits i can use
tonight i managed to remove the rear diff from tha zook in preparing the hilux one to go in
no pics
Re: safaripetes zook
slack
safaripete wrote:not alot been happening with this
so far been colecting bits an pieces
front and rear hilux diffs
transfercase from a bighorn
have brought a whole vn v6 commodore wagon for the motor and trans an other bits i can use
tonight i managed to remove the rear diff from tha zook in preparing the hilux one to go in
no pics
its not how big the 4x4 is its how angry the diver is
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
so today after alot of head scratching with a tape i managed to borrow a couple of 35s off rotordogg
so i had to do a little panel work to get the tryes to fit under haha
also modified the surf rear upper and lower arms lengthing them to the same as the safari arms i have
tomorrow i will make up some chassis mounts and tack things into place might even get some pics for all the pic hogs
so i had to do a little panel work to get the tryes to fit under haha
also modified the surf rear upper and lower arms lengthing them to the same as the safari arms i have
tomorrow i will make up some chassis mounts and tack things into place might even get some pics for all the pic hogs
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
grr
so the weather is dictating how much i can do on this atm
but managed to cut off chassis mounts tonight will head into work tmrw and make up some mounts
also thanks to nomis i now have an ifs surf steering box
so the weather is dictating how much i can do on this atm
but managed to cut off chassis mounts tonight will head into work tmrw and make up some mounts
also thanks to nomis i now have an ifs surf steering box
Re: safaripetes zook
good shit Pete, looking forward to some pics
Got a Daihatsu Something, hasn't got a Daihatsu engine.... or diffs.... and it doesn't have windows.... or doors.... but its got tyres....
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
made some mounts up
also lengthened to stock surf arms
will tack them into place on the weekend
also lengthened to stock surf arms
will tack them into place on the weekend
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
Lookin mean mate,lookin very mean
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
- Contact:
Re: safaripetes zook
lower and upper rear links are tacked into place need to ut down the spring pearches and make some more shit
is anyone actually reading this or should i not worry about updating
is anyone actually reading this or should i not worry about updating
Who is online
Users browsing this forum: No registered users and 21 guests