96 v6 surf

User avatar
catalystracing
Hard Yaka
Posts: 820
Joined: Sat Dec 11, 2010 8:14 am
Location: within the matrix

Re: 96 v6 surf

Postby catalystracing » Sun Feb 05, 2017 8:01 pm

That looks awesome, well done. 8)

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sat Feb 11, 2017 5:21 pm

catalystracing wrote:That looks awesome, well done. 8)


Cheers bro
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sat Feb 11, 2017 5:25 pm

Made a start on rear, spare wheel will sit on that frame then 350 mm above that will be the deck.

20170211_181033.jpg


Ignore the big box sitting above wheels
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Mon Feb 20, 2017 8:28 pm

Bit more progress.

20170212_154815.jpg


20170219_101553.jpg
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

corbanfisher
Driver/Navigator
Posts: 20
Joined: Wed Jul 27, 2016 11:34 am

Re: 96 v6 surf

Postby corbanfisher » Wed Mar 08, 2017 12:54 pm

nice work
have you done anymore
do you have any vids of this in action
:?:

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Wed Mar 08, 2017 5:10 pm

corbanfisher wrote:nice work


cheers

corbanfisher wrote:have you done anymore


a bit but not a lot, haven't had time.

corbanfisher wrote:do you have any vids of this in action


one day :lol:
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sun Mar 12, 2017 10:42 am

A bit of progress.

Hoop over top isn't perfectly even but that's what you get using a cheap $200 bender.
Hopefully not too close to body, will find out one day, if it rubs might have to solid mount 2 rear body mounts.

20170312_113602.jpg


About out of steel so will have to order some more.
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

corbanfisher
Driver/Navigator
Posts: 20
Joined: Wed Jul 27, 2016 11:34 am

Re: 96 v6 surf

Postby corbanfisher » Wed Mar 15, 2017 12:56 pm

nice keep us posted
cant wait to see pic/vids of it
:lol: :lol: :lol:

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sat Apr 15, 2017 5:26 pm

Finally a bit more time

20170415_155726.jpg



20170415_154409.jpg


A 10.5 wide spare will go forward about 50 mm further forward.

That dog box used to fit in back of surf when it was a wagon, comes apart/clips together.
Will put holes in deck so the legs on box can go through so it can sit flat on deck like that, usually a 230 mm space underneath.
Good for safaris too. Will get a canvas top to go over a frame one day.

Stays to make up next, on the side of crate.
Last edited by mudsurfv6 on Sat Jun 17, 2017 5:55 pm, edited 1 time in total.
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
fh2014
Hard Yaka
Posts: 304
Joined: Mon Oct 20, 2014 4:48 pm
Location: North Shore AKL

Re: 96 v6 surf

Postby fh2014 » Sat Apr 15, 2017 5:42 pm

What a machine! not much of a surf under the body now is it, how much better does it go with supercharger?

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sat Apr 15, 2017 6:09 pm

fh2014 wrote:not much of a surf under the body now is it


not standard :lol: , but plenty of 130 surf. but yeah quite a bit of prado too, or custom. :D

fh2014 wrote:how much better does it go with supercharger?


not sure yet, only time I've driven it with the sc fitted I drove 45 mins home from town without the piggy back computer wired in, couldn't accelerate too much cos the ecu got confused with boost instead of vacuum and put into limp mode.

but if you look on 'you tube' at the americans super charged 5vzfe tacomas that might give you an idea of what I'm hoping for. 8) :shock:
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sat Jun 17, 2017 6:04 pm

Brackets to fix sliders to chassis.

20170617_152210.jpg


Start of sliders, bolts will be other way around, just don't want to melt nylons welding.
Hopefully bolt heads won't get caught on rocks or anything.
The box running front to back will be part of the complete exo so when/if lifted off it won't just be attached to the main hoop in one place. I'll put a bar from slider to below where hoop sits on deck behind rear door.
big blue box will be open end (have something in to stop it filling with mud) so can have a box slid in held by large pin (like a tow bar) in case a winch/whatever point is needed on the side low down, pulling straight off chassis.
that short piece of blue box will be welded sideways into smaller box and have tabs to bolt on like other two.

20170617_170147.jpg
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sat Jun 24, 2017 4:34 pm

In place, some diagonals to go in to strengthen it up.
Can start building up off it now.
Hopefully clears body when/if lifted up as part of the exo.

20170624_162542.jpg
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sat Jul 08, 2017 5:51 am

Bit more, 2 bars along guard to join up to front bar next.

20170706_143716.jpg


20170706_143733.jpg


End of box behind rear door be cut on angle and capped.

Was planning on adding a bar between doors but had to be out so far to clear doors when open that it just looked ridiculous, and would also get caught on things, so will make do without it.

20170701_142844.jpg


20170701_142832.jpg


Rear door still hit it when fully open, and front door only missed by about 5 mm.
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
skidmark
Hard Yaka
Posts: 616
Joined: Sun Sep 12, 2010 2:24 pm
Location: hamilton

Re: 96 v6 surf

Postby skidmark » Sun Jul 09, 2017 9:16 pm

I had thought about that bar aswell, I haven't really required it on mine yet.....ps should be sweet with clearance, looks like plenty there. The bpillar bar on mine was real tight, aprox 5-10mm in places and well let's just say the there's some nice curved clearencing been done.... about 15mm would be about right id say
modified surf, hardly drive it seem to keep modifying it....

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Mon Jul 10, 2017 10:19 am

Hard to see in photos but it stuck out a lot further than the other bars along side, figured it would get caught up on things and probably just cause more problems. So I cut it up and used else where.
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
UBZ
Hard Yaka
Posts: 1633
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Re: 96 v6 surf

Postby UBZ » Mon Jul 10, 2017 8:31 pm

Why not make it removable , fit it tight and block the back doors a bit for hardcore tracks and take it out for around town ?
LR110 ..... LJ50 project :roll:
Chris.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Mon Jul 10, 2017 8:54 pm

UBZ wrote:Why not make it removable , fit it tight and block the back doors a bit for hardcore tracks and take it out for around town ?


hadn't thought of that :lol: . good thinking.
sounds like a plan, just have to figure out mounting at top and bottom. if rear door doesn't open when B pillar bar in place then there could be a horizontal bar across rear door that slides into that 2" box end behind rear door handle. would then need a removable plug in that 2" box when B bar not in place. just thinking out loud.

I've always wanted to put a removable horizontal bar across each door that hinges open with door, just below handle height, for leaning against banks/trees etc. had given up on that idea with no B pillar bar, but now its making me think again..... :shock:
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Fri Jul 21, 2017 2:08 pm

20170720_151403.jpg


Now to make the other side look the same :lol: :roll:
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Wed Aug 16, 2017 8:55 pm

Passengers side started.

20170730_104351.jpg
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
Clint
Hard Yaka
Posts: 632
Joined: Tue Feb 17, 2004 12:00 pm
Location: Rotoiti (North Is)

Re: 96 v6 surf

Postby Clint » Fri Aug 18, 2017 8:40 am

Looking good!

mudsurfv6 wrote:
UBZ wrote:
I've always wanted to put a removable horizontal bar across each door that hinges open with door, just below handle height, for leaning against banks/trees etc. had given up on that idea with no B pillar bar, but now its making me think again..... :shock:


One thing that could be good for an idea is to just have a bit of 25 - 50mm RHS bolted directly to the door at the height most likely to get smashed, like a super heavy duty rubbing strip, I've seen it done in stainless with the bolts recessed in & it looked really good. Would probably want to add some extra support behind it at the ends to get max strength.

Cheers
Clint
UZJ71 Landcruiser
Jeep J20 - 1UZ-FE powered (part owner)
KTM 640

If it breaks, build it stronger.
If it doesn't break, drive it harder.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Fri Aug 18, 2017 3:13 pm

That would help. Door isn't flat though, would have to shape it to fit.
Was hoping to keep it all flush along side, will do what UBZ suggested, and was picturing the front door bar hinged off exo in front of door and latching/contacting the vertical B pillar bar. So all flush along side.
But if I don't get to that will look at something attached to the doors.
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sun Aug 20, 2017 8:25 pm

Tail gate frame made up.

20170819_140945.jpg


20170819_141007.jpg
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sun Aug 27, 2017 8:54 pm

Spare wheel cover also acts as a step for getting onto deck.

20170827_171454.jpg


20170827_171440.jpg


Still got to plate side for strength and put chains on to hold it level.
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
catalystracing
Hard Yaka
Posts: 820
Joined: Sat Dec 11, 2010 8:14 am
Location: within the matrix

Re: 96 v6 surf

Postby catalystracing » Mon Aug 28, 2017 9:04 pm

8) , looking good.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sun Oct 15, 2017 7:09 pm

catalystracing wrote:8) , looking good.


Cheers bro.

Got a whole weekend spent on rest of bar work and lifted it off. Got a heap of welding to do now.

Photos will have to be one at a time, for some reason all photos in one post show same.

20171014_112956.jpg
Last edited by mudsurfv6 on Sun Oct 15, 2017 7:15 pm, edited 1 time in total.
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sun Oct 15, 2017 7:11 pm

20171015_120511.jpg
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sun Oct 15, 2017 7:17 pm

DSCN0763.JPG


handy having a tractor.
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sun Oct 15, 2017 7:18 pm

DSCN0766.JPG
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

User avatar
mudsurfv6
Hard Yaka
Posts: 640
Joined: Fri May 23, 2014 6:29 pm
Location: pahiatua

Re: 96 v6 surf

Postby mudsurfv6 » Sun Oct 15, 2017 7:19 pm

20171015_123248.jpg
1996 vzn185 surf, TRD supercharger, SAS, 35s, 4" lift, 2 lockers, ute chopped + more happening. Andrew 0272226292.

Return to “Projects / Mod's”

Who is online

Users browsing this forum: No registered users and 8 guests