Disco 1 Front recovery eyes

User avatar
3VILC
Hard Yaka
Posts: 1009
Joined: Sun Jan 06, 2008 12:00 pm
Location: Welcome Bay

Disco 1 Front recovery eyes

Postby 3VILC » Thu Aug 09, 2018 7:39 pm

So with the lack of easy places to mount anything on the front of a Disco 1 and the price of aftermarket options, I was thinking I'd just knock something similar up myself. Some 60x12 flat bar with a shackle hole in the end bolted to the 2 holes that hold the bumper on same as all the aftermarket stuff seems to be, I was thinking of adding another length to tie it backwards to the Jate ring bolt hole also for good measure to reduce the twisting action on the top 2 bolts. Anyone see anything wrong with this idea?
-------------------------------------------------
Newly brought currently bog standard Discovery V8i with a drinking problem :lol:

User avatar
Crawlerer79
Hard Yaka
Posts: 305
Joined: Sun Jun 12, 2016 3:38 pm
Contact:

Re: Disco 1 Front recovery eyes

Postby Crawlerer79 » Thu Aug 09, 2018 8:09 pm

This is what you want:

Image

Image

We've run this set up on all our Disco's, works well. They come drilled at 7/16" but we bore them out to 1/2". Max a Canterbury Land Rover Spares sells them pretty cheap ($30-40ish a side from memory), but I'm sure you could knock something the same design pretty easily. You have to run them on the inside of the chassis rail because of the panhard mount being on the outside. You'll just have to get a longer bolt, from memory it's already 1/2"
'The Big Truck' - 2001 TD5 Disco II
'Lando' - 1994 V8 Disco
'The Caramel Trophy Truck" - 1990 Disco Ex-Camel Trophy (?)

User avatar
3VILC
Hard Yaka
Posts: 1009
Joined: Sun Jan 06, 2008 12:00 pm
Location: Welcome Bay

Re: Disco 1 Front recovery eyes

Postby 3VILC » Thu Aug 09, 2018 8:22 pm

I remember asking about yours before. I remembered the shape of them but for some reason I thought yours were eyes not hooks bolted on. That's what gave me the idea of using the rear holes for extra strength compared to the store brought plates that use the bumper mounts only. I'll see how we go I intend using both sides with an equaliser strap anyway to spread the load onto both sides. That panhard mount is a pain I'd just use a pair of jate rings if you could use both sides.
Wish I hadnt sold all my gears with last truck forgot how expensive all the straps etc add up quick haha. Still got a couple of hooks left for the rear tho
-------------------------------------------------
Newly brought currently bog standard Discovery V8i with a drinking problem :lol:

User avatar
Crawlerer79
Hard Yaka
Posts: 305
Joined: Sun Jun 12, 2016 3:38 pm
Contact:

Re: Disco 1 Front recovery eyes

Postby Crawlerer79 » Thu Aug 09, 2018 8:31 pm

Yea the panhard mount is a bit of a pain, but it can be easily worked around. I had toyed with the idea of doing shackle holes rather than hooks on the last one and I wish I had. The equaliser strap would be great, I've been meaning to get one made up for a while now haha. And yes, it sure adds up!
'The Big Truck' - 2001 TD5 Disco II
'Lando' - 1994 V8 Disco
'The Caramel Trophy Truck" - 1990 Disco Ex-Camel Trophy (?)

Cameron
Hard Yaka
Posts: 733
Joined: Mon Sep 13, 2010 2:34 pm

Re: Disco 1 Front recovery eyes

Postby Cameron » Fri Aug 10, 2018 11:00 am

man those jate ring things look like they'd ping off without even snatchign off them.

Cameron
Hard Yaka
Posts: 733
Joined: Mon Sep 13, 2010 2:34 pm

Re: Disco 1 Front recovery eyes

Postby Cameron » Mon Aug 13, 2018 2:00 pm

Crawlerer79 wrote:This is what you want:

Image

Image

We've run this set up on all our Disco's, works well. They come drilled at 7/16" but we bore them out to 1/2". Max a Canterbury Land Rover Spares sells them pretty cheap ($30-40ish a side from memory), but I'm sure you could knock something the same design pretty easily. You have to run them on the inside of the chassis rail because of the panhard mount being on the outside. You'll just have to get a longer bolt, from memory it's already 1/2"


ordered myself one of these today.

User avatar
Crawlerer79
Hard Yaka
Posts: 305
Joined: Sun Jun 12, 2016 3:38 pm
Contact:

Re: Disco 1 Front recovery eyes

Postby Crawlerer79 » Mon Aug 13, 2018 6:16 pm

Cameron wrote:ordered myself one of these today.

Sweet! How much did they set you back? Been a while since I bought any haha
'The Big Truck' - 2001 TD5 Disco II
'Lando' - 1994 V8 Disco
'The Caramel Trophy Truck" - 1990 Disco Ex-Camel Trophy (?)

Cameron
Hard Yaka
Posts: 733
Joined: Mon Sep 13, 2010 2:34 pm

Re: Disco 1 Front recovery eyes

Postby Cameron » Mon Aug 13, 2018 8:52 pm

Bloke said $35 plus shipping. Gave him my credit card deets and he's gonna send me one.
Doesn't seem to have shown up on my card yet so hopefully he does :lol: will let ya know what the go is once it turns up. Def worth yt to me vs. Spending the time sourcing steel and making my own. Time is much more valuable than money at the moment!
I'm hoping to keep my stock preface lift bumper valance and will run it on the left hand side.

Cheers for the tip on where to source!

User avatar
Crawlerer79
Hard Yaka
Posts: 305
Joined: Sun Jun 12, 2016 3:38 pm
Contact:

Re: Disco 1 Front recovery eyes

Postby Crawlerer79 » Mon Aug 13, 2018 9:16 pm

Yea that's not changed since I got my last set, they're a great product for the money! Haha no worries, hope the valance works out. My one never came with one so have no real idea as to whether it'd sneak in there
'The Big Truck' - 2001 TD5 Disco II
'Lando' - 1994 V8 Disco
'The Caramel Trophy Truck" - 1990 Disco Ex-Camel Trophy (?)

Cameron
Hard Yaka
Posts: 733
Joined: Mon Sep 13, 2010 2:34 pm

Re: Disco 1 Front recovery eyes

Postby Cameron » Tue Aug 14, 2018 8:40 am

yeah might need a snip but should work fine :)

Cameron
Hard Yaka
Posts: 733
Joined: Mon Sep 13, 2010 2:34 pm

Re: Disco 1 Front recovery eyes

Postby Cameron » Thu Aug 16, 2018 8:18 am

$55 Delivered.
Much cheaper than making myself IMO

Disco Gofer
Hard Yaka
Posts: 294
Joined: Wed Sep 22, 2010 5:30 pm
Location: Rukuhia, Hamilton

Re: Disco 1 Front recovery eyes

Postby Disco Gofer » Tue Aug 21, 2018 4:30 pm

[img][IMG]http://i1081.photobucket.com/albums/j341/gofermandini/Mobile%20Uploads/Disco%20Front%20Recovery%20Bracket%202_zpsho2unacl.jpg[/img][/img]
[img][IMG]http://i1081.photobucket.com/albums/j341/gofermandini/Mobile%20Uploads/Disco%20front%20recovery%20bracket%201_zpszqgrhpme.jpg[/img][/img]

Just had some D1/2 ones made on Friday for a box of beer............. plus a spare set for a friend. 10mm plate and will still add a gusset along the inner side.

Return to “Range Rover / Land Rover”

Who is online

Users browsing this forum: No registered users and 10 guests