110 Single cab flat deck 4bd1t swap
110 Single cab flat deck 4bd1t swap
Some pics of my newly acquired 110 flat deck. Went upto auckland today to pick it up. It seems to be in fairly reasonable condition for its age, rego is on hold so will be easy enough to get back on the road. It was orignally a 3.5 v8 but that and the lt85 have been removed at some stage and have been replaced with an lt77 and an isuzu 2l diesel, dont know the exact details on the engine, looks antique. Currently tossing up whether to strip my 200tdi disco and use the engine and box in it along with the suspension and diffs. Or fit a 4jb1t I have sitting here and attach it to a spare lt77
Heres some pics
Heres some pics
Last edited by quattro on Tue Sep 20, 2016 9:45 pm, edited 1 time in total.
Discovery 4bd1t project
Re: 110 Single cab flat deck
Got the body off. The chassis is pretty much fucked. Has a had a lot of welding done on it. So will be off to scrap this week. If anyone is interested in the body let me know
Discovery 4bd1t project
- Checkerhead
- Hard Yaka
- Posts: 463
- Joined: Sun May 25, 2014 11:20 pm
- Location: Christchurch
Re: 110 Single cab flat deck
Bugger.
Put the body on the disco chassis that you were considering stealing the engine from?
Put the body on the disco chassis that you were considering stealing the engine from?
Last edited by Checkerhead on Mon Mar 28, 2016 7:51 pm, edited 1 time in total.
Supercharged VH45 Surf safari winch truck in the making
viewtopic.php?f=18&t=33527&hilit=checker%2A
viewtopic.php?f=18&t=33527&hilit=checker%2A
Re: 110 Single cab flat deck
Hey mate, I have a 110 which im stealing bits off for another one. Chassis needs a couple of repairs but its in pretty good nick (I was considering getting it back on the road). PM me if interested, not wanting huge amounts for what will be leftover
Re: 110 Single cab flat deck
Hi Quattro
let me know if your have any body parts available . I need a single cab roof and the rear window, but mainly the roof if they are available Thanks raywongu@ihug.co.nz
let me know if your have any body parts available . I need a single cab roof and the rear window, but mainly the roof if they are available Thanks raywongu@ihug.co.nz
Re: 110 Single cab flat deck
I am after front diff arms and brackets.
Cheers
Cheers
Re: 110 Single cab flat deck
quattro wrote:Have bought an isuzu 4bd1t and msa box for it
I like where this is going...
Re: 110 Single cab flat deck 4bd1t swap
What gearbox are you thinking of using?
Re: 110 Single cab flat deck 4bd1t swap
BadCo wrote:What gearbox are you thinking of using?
The isuzu msa gearbox, will get onto making an adapter for the transfer case next week
Discovery 4bd1t project
Re: 110 Single cab flat deck 4bd1t swap
quattro wrote:BadCo wrote:What gearbox are you thinking of using?
The isuzu msa gearbox, will get onto making an adapter for the transfer case next week
There is an adaptor available out of Australia, but they are expensive, especially if you can make your own.
Any chance of making two adaptors?
Re: 110 Single cab flat deck 4bd1t swap
Discovery 4bd1t project
Re: 110 Single cab flat deck 4bd1t swap
Yeah that is the one. A lot of money to do the conversion using that adaptor.
Re: 110 Single cab flat deck 4bd1t swap
The shaft is going to cost me about 600, the adapter plate is simple enough for me to make
Discovery 4bd1t project
Re: 110 Single cab flat deck 4bd1t swap
Dropped off the isuzu box and transfer case today, should have the adapter in the next week or 2, better get the rust sorted and all the other parts i need to buy
Discovery 4bd1t project
Re: 110 Single cab flat deck 4bd1t swap
Forgive me this question.So are you fixing the rusted chassis, or replacing it with something else?
Re: 110 Single cab flat deck 4bd1t swap
BlakeNZ wrote:Forgive me this question.So are you fixing the rusted chassis, or replacing it with something else?
Picked up another 2 chassis, will try and find some more body parts and build up a 2nd later
Discovery 4bd1t project
Who is online
Users browsing this forum: No registered users and 1 guest