ID this Tie Rod end

lilpigzuk · Postby **lilpigzuk** » Mon Dec 02, 2013 7:13 pm

Anyone able to identify this tie rod. Fairly sure its Toyota as the vehicle has 40 series running gear. BNT nearly got it right, but the bit I need in 14mm was 12mm. They soon gave up after that since they weren't dealing with the "original vehicle"

turoa · Postby **turoa** » Mon Dec 02, 2013 7:27 pm

From that it looks like an 80 series tie rod end but someone would probably have to measure to be sure

mudlva · Postby **mudlva** » Mon Dec 02, 2013 7:35 pm

60/70 rhs end

could also be steering link as well

lilpigzuk · Postby **lilpigzuk** » Mon Dec 02, 2013 7:47 pm

Thanks so far. 80 series is 23mm main thread size... Keep up the suggestions

mudlva · Postby **mudlva** » Mon Dec 02, 2013 8:16 pm

didnt check the thread but i have a end here that measures 14d x 77 with 21mm main shaft dia

its for a steering link end on a 60 i think

kbushnz · Postby **kbushnz** » Tue Dec 03, 2013 7:45 am

Its not a Square shape Prado one... Same thread dia's..But the lengths are longer on the Prado one for the 21mm dia shaft...

muddy · Postby **muddy** » Tue Dec 03, 2013 7:57 am

I'd go with 60 series. They are a size bigger than 40's and commonly used in a power steering upgrade...

Big · Postby **Big** » Tue Dec 03, 2013 6:58 pm

This just for reference for others as I had one in my parts bin.. :roll:

Off an 80, measurement's are crude as I rounded everything up to the mm.. not sure if left or right as I just unscrewed it from a spare steering arm..

enjoy

foreign · Postby **foreign** » Tue Dec 03, 2013 8:38 pm

hilux or surf. think they are 21x1.5mm

mickey · Postby **mickey** » Tue Dec 03, 2013 9:45 pm

lilpigzuk wrote:Anyone able to identify this tie rod. Fairly sure its Toyota as the vehicle has 40 series running gear. BNT nearly got it right, but the bit I need in 14mm was 12mm. They soon gave up after that since they weren't dealing with the "original vehicle"

I've got a FJ40 front diff in the garage with tie rod attached.
The rod end seems to be very close to the one in the picture.
Came out of a 1976/77 FJ40.

tommie · Postby **tommie** » Mon Dec 19, 2016 6:12 pm

I know old topic but did anyone find out what this was from in the end?

Rotazuk · Postby **Rotazuk** » Mon Dec 19, 2016 6:18 pm

Yep . But cant remember

. Let me think about it . I am leaning to 80 series .

tommie · Postby **tommie** » Mon Dec 19, 2016 7:19 pm

80 series is 23mm got one of those in hand but the one I need is 21mm

churchill · Postby **churchill** » Wed Dec 21, 2016 7:57 pm

Solid axle hilux is my pick. Sane as 80 series bit with a M21x1.5 thread.

ID this Tie Rod end

ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Re: ID this Tie Rod end

Who is online