Suzuki sj410 seat swap
Suzuki sj410 seat swap
Who has fitted new or second hand after market seats to their sj? can you tell me what seats you used and does anybody have photos of how they mounted them? I have some mr2 seats but they are going to take alot of modifying to the mounts to make them fit and im a little unsure what I will get away with wof time
Re: Suzuki sj410 seat swap
Hi Chops,
If it were me I would try to fit the new seats onto the mounts from the old seats, that way there is minimal (no) modification to the very visible bits where the seats mount to the body.
Good luck with the job and post some pics when you get there.
Cheers
Hein
If it were me I would try to fit the new seats onto the mounts from the old seats, that way there is minimal (no) modification to the very visible bits where the seats mount to the body.
Good luck with the job and post some pics when you get there.
Cheers
Hein
- mroffroader
- Hard Yaka
- Posts: 2330
- Joined: Sat Mar 25, 2006 12:00 pm
- Location: Lower Hutt WELLINGTON :D
- Contact:
Re: Suzuki sj410 seat swap
woops...double post
Last edited by mroffroader on Mon Aug 02, 2010 10:30 pm, edited 1 time in total.
80 series tow bus towing a redneck ass vitara
- mroffroader
- Hard Yaka
- Posts: 2330
- Joined: Sat Mar 25, 2006 12:00 pm
- Location: Lower Hutt WELLINGTON :D
- Contact:
Re: Suzuki sj410 seat swap
Chops4wd wrote:Who has fitted new or second hand after market seats to their sj? can you tell me what seats you used and does anybody have photos of how they mounted them? I have some mr2 seats but they are going to take alot of modifying to the mounts to make them fit and im a little unsure what I will get away with wof time
Technically you need to have them certified...unless your wof guy is chilled..
Mazda eunos are good as are mazda gtx. Most fixed back race seats are to wide to fit. I have Racetech 100's in mine but if your a bigger person these wont suit as you probably wont fit in them
80 series tow bus towing a redneck ass vitara
Re: Suzuki sj410 seat swap
ive got old school primera buckets in mine. rails have been modded to line up with the factory mounting pionts.
Can even lift the passengewr seat forward still
Can even lift the passengewr seat forward still
LR110 ..... LJ50 project
Chris.
Chris.
Re: Suzuki sj410 seat swap
Technically if you bolt your new seats to the OEM rails and use the OEM seat anchor points, you shouldn't require a cert. If the WOF person, in their opinion is happy that your seats are safe and secure, then no problem.
But like anything, if your workmanship is bogey and you fit some seats to some whetu as rails and drill some holes in the floor to mount it, the WOF man's going to send you on your way to get a LVC, which you will also fail.
Check out page 4 of this document:
http://www.lvvta.org.nz/CertThresholdScheduleApril04V3.pdf
I have been know to take this document with me when getting WOF's
But like anything, if your workmanship is bogey and you fit some seats to some whetu as rails and drill some holes in the floor to mount it, the WOF man's going to send you on your way to get a LVC, which you will also fail.
Check out page 4 of this document:
http://www.lvvta.org.nz/CertThresholdScheduleApril04V3.pdf
I have been know to take this document with me when getting WOF's
lax2wlg wrote:Is that like saying 'she's hot, for a crackwhore??
Re: Suzuki sj410 seat swap
DieselBoy wrote: workmanship is bogey and fitted some seats to some whetu as rails and drilled some holes in the floor to mount them:
But that's exactly how they came out from factory
LR110 ..... LJ50 project
Chris.
Chris.
Re: Suzuki sj410 seat swap
DieselBoy wrote:I have been know to take this document with me when getting WOF's
Good Idea!
Re: Suzuki sj410 seat swap
mk1 crx seats are a good option,
forum.difflock.com
forum.difflock.com
Who is online
Users browsing this forum: No registered users and 12 guests