SJ413 diff swap to Vitara

Santas60
Winch master
Posts: 10
Joined: Thu Jun 09, 2016 10:49 pm
Location: Dunedin

SJ413 diff swap to Vitara

Postby Santas60 » Mon Aug 21, 2017 8:24 pm

can someone tell me whether a vitara diff will fit into a SJ413 axle? (excuse the poor terminology lol) :lol:

just looking into regearing options for my SJ,

cheers :P

User avatar
UBZ
Hard Yaka
Posts: 1627
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Re: SJ413 diff swap to Vitara

Postby UBZ » Mon Aug 21, 2017 11:43 pm

The G16 vitara front diff will fit into the sj413 & samurai housing . From memeroy they are 22spline , so to fit to the rear of a SJ you need to change the side gears to 26spline .

Also the vitara Carrier is alloy and a lot weaker than the SJ steel carrier .

The best option is to use the vitara ring and pinion and rebuild them into the SJ steel carrier with the right side gears for front and rear
LR110 ..... LJ50 project :roll:
Chris.

Sausager
Hard Yaka
Posts: 199
Joined: Fri Oct 11, 2013 10:12 am
Location: Silverstream, Wellington

Re: SJ413 diff swap to Vitara

Postby Sausager » Tue Aug 22, 2017 7:08 am

Some of the vitara diffs are 26 spline and so are a direct fit. But you'll just end up breaking the aluminium housing, so swapping the ring and pinion over is the go.

Have a read here: http://suzukiclubuk.co.uk/diy/16-transm ... conversion

Santas60
Winch master
Posts: 10
Joined: Thu Jun 09, 2016 10:49 pm
Location: Dunedin

Re: SJ413 diff swap to Vitara

Postby Santas60 » Wed Aug 23, 2017 1:12 pm

Sausager wrote:Some of the vitara diffs are 26 spline and so are a direct fit. But you'll just end up breaking the aluminium housing, so swapping the ring and pinion over is the go.

Have a read here: http://suzukiclubuk.co.uk/diy/16-transm ... conversion



great, thanks for this. helpful as :D

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest