Mitsubishi Challenger Specs

dvk-kp
Hard Yaka
Posts: 265
Joined: Sat Mar 28, 2009 10:48 am
Location: Dannevirke

Mitsubishi Challenger Specs

Postby dvk-kp » Tue Sep 29, 2015 9:45 am

Hi, does anyone know what running gear challengers come out with? In particular the diffs. Are they 9" rear diff like 3l pajeros or 9.5" like the 3.5s? I assume front will be 8"?

Looking at 3l non gdi challengers.

Thanks

User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland
Contact:

Re: Mitsubishi Challenger Specs

Postby coxsy » Tue Sep 29, 2015 9:03 pm

suppose to be build on a paj chassis
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered

User avatar
NJV6
Hard Yaka
Posts: 2749
Joined: Mon Nov 15, 2004 12:00 pm
Location: Southland
Contact:

Re: Mitsubishi Challenger Specs

Postby NJV6 » Tue Sep 29, 2015 9:47 pm

Triton running gear mostly. Yes to the 8 inch front diff, unsure on rear but would suspect 9 inch, count the bolts holding the diff head in, 10 bolt for 9 inch, 12 bolt for 9.5 inch.
Early ones were Leaf sprung, later were Coils. Coils, suspension arms all different to pajero and Triton (obviously)
SWB V6 Paj with one or two mods ;)

dvk-kp
Hard Yaka
Posts: 265
Joined: Sat Mar 28, 2009 10:48 am
Location: Dannevirke

Re: Mitsubishi Challenger Specs

Postby dvk-kp » Wed Sep 30, 2015 7:03 am

Cool thanks guys. A friend of mine down the line has a 2.8 diesel one so will get him to count the bolts and see what's in the back. Will have to look at as many as possible and figure out the differences.

Thanks

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest