Safari Manual Conversion

Moderator: Mark

tuckertrucker
Hard Yaka
Posts: 138
Joined: Tue Sep 01, 2015 10:59 pm
Location: Kerikeri

Safari Manual Conversion

Postby tuckertrucker » Wed Oct 11, 2017 6:51 pm

Hi ORE

I'm after a manual conversion for my safari. Need pretty much everything, but looking at keeping my transfer case as I know its condition. Whats out there in terms of the rest of the stuff. Happy to buy bits and pieces along the way so I can clean things up and get everything ready to do the change . Also helps keep the costs down if I spend the money over a while too. But dont mind if the whole thing comes up at a good price. Im in kerikeri but dont mind a decent drive if parts show up at the right price.

If you have the parts, or know of anyone who has them, give me a message. Looking for gearbox, bell housing, flywheel, clutch, pedal box, slave master cylinder and lines, gear shifter etc.

Don't mind if small bits are missing like trim or bash plates. Any one know anyone please PM me and I can get numbers out etc.

Cheers, Dylan.

User avatar
coxsy
Hard Yaka
Posts: 5144
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland
Contact:

Re: Safari Manual Conversion

Postby coxsy » Wed Oct 11, 2017 8:35 pm

complete motor an manual box on facebook safari and patrol page for $2500
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo

tuckertrucker
Hard Yaka
Posts: 138
Joined: Tue Sep 01, 2015 10:59 pm
Location: Kerikeri

Re: Safari Manual Conversion

Postby tuckertrucker » Thu Oct 12, 2017 5:09 pm

saw one just yesterday. But i think ive found one now so hopefully all is good

tuckertrucker
Hard Yaka
Posts: 138
Joined: Tue Sep 01, 2015 10:59 pm
Location: Kerikeri

Re: Safari Manual Conversion

Postby tuckertrucker » Wed Oct 18, 2017 7:38 pm

Got a trans from a guy in Parakai for 750. Will go nicely. Had the flywheel machined at truweld and it came up well and got the hydraulic lines and booster and pedal in too.

For those who've done it before, is the pain in the ass top bolt absolutely necessary to get in? Ive torqued up the four bolts on the firewall and shes solid in there.

Cheers

User avatar
coxsy
Hard Yaka
Posts: 5144
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland
Contact:

Re: Safari Manual Conversion

Postby coxsy » Wed Oct 18, 2017 8:40 pm

yer pulled my engine out separate from the box that bolt was a complete asshole to undo and reinstall tight :shock:
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo

mudtroll
Hard Yaka
Posts: 296
Joined: Mon Jun 15, 2009 5:49 pm
Location: Albany

Re: Safari Manual Conversion

Postby mudtroll » Thu Oct 19, 2017 7:00 am

That's when a body lift comes in handy :D

Return to “Nissan”

Who is online

Users browsing this forum: Baidu [Spider] and 9 guests