Rims

User avatar
brianr70
Hard Yaka
Posts: 507
Joined: Sat Jan 07, 2006 12:00 pm
Location: Wellington

Rims

Postby brianr70 » Mon Jan 24, 2011 5:09 pm

Are 6 stud rims, say off a Hilux interchangeable with other 6 stud makes like Isuzu?

for example:

http://www.trademe.co.nz/Browse/Listing ... =348696772
I travelled the road less travelled now where the heck am I!!!

User avatar
4WDbits
Hard Yaka
Posts: 659
Joined: Thu Oct 27, 2005 12:00 pm
Location: Auckland
Contact:

Re: Rims

Postby 4WDbits » Mon Jan 24, 2011 5:30 pm

Usually. There are a few 6/139.7 PCD steel rims with a centre of 108mm which means they don't fit Nissans. Most 6/139.7 PCD have a 110mm centre bore. Not sure what is required for the Isuzus.

User avatar
mud_slinger
Hard Yaka
Posts: 1050
Joined: Sun Oct 08, 2006 12:00 pm
Location: christchuch

Re: Rims

Postby mud_slinger » Mon Jan 24, 2011 6:21 pm

i have surf rims on mine
needs more curry



0272593533

User avatar
dazza85
Hard Yaka
Posts: 938
Joined: Tue Jan 03, 2006 12:00 pm
Location: Hastings
Contact:

Re: Rims

Postby dazza85 » Sun Jan 30, 2011 5:46 pm

did you find some ??? I have a set that are in average condition that need a new home at a very affordable price :wink:
There is no mechanical problem so difficult that it cannot be solved by brute strength and ignorance.

User avatar
FORGE1
Hard Yaka
Posts: 630
Joined: Fri Feb 27, 2009 6:44 am
Location: Whangarei

Re: Rims

Postby FORGE1 » Sun Jan 30, 2011 6:00 pm

I have 15x8 or 8.5 (cant remember) alloy rims that were on my Safari and bolted straight on.
Im running 32x11.5 Mud Stars and rub on full flex. I have LWB springs in the back and wound up the front.
Don't Bend the Rules, Rule the Bends!!!

User avatar
Mattman
Hard Yaka
Posts: 1643
Joined: Sun Mar 05, 2006 12:00 pm
Location: Kapiti

Re: Rims

Postby Mattman » Sat Feb 26, 2011 4:19 pm

What sort of 32's do you have? I am about to fit an OME lift kit and 33in Maxxis Bighorns which measure at 32in.

Am hoping for minimal rubbage....

User avatar
skid
Tyre Man
Posts: 6309
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: Rims

Postby skid » Sat Feb 26, 2011 7:57 pm

4WDbits wrote:Usually. There are a few 6/139.7 PCD steel rims with a centre of 108mm which means they don't fit Nissans. Most 6/139.7 PCD have a 110mm centre bore. Not sure what is required for the Isuzus.


this is correct

for what brianr70 is doing it should be fine, but if you were going the other way you will find that Isuzu rims have the smaller centrebore

bought some 15 x 6" bighorn steels once to widen etc and found they had the smaller centrebore
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*

User avatar
Drurban
Hard Yaka
Posts: 623
Joined: Wed Mar 25, 2009 4:19 pm
Location: Tokoroa/Auckland

Re: Rims

Postby Drurban » Sun Feb 27, 2011 4:36 pm

My friend is using my old rims, and he has a Toyota Hilux and I have a Isuzu Mu.

Cheers

Ruben
1997 Isuzu Mu, 3.1TD, 5sp Manual.

User avatar
FORGE1
Hard Yaka
Posts: 630
Joined: Fri Feb 27, 2009 6:44 am
Location: Whangarei

Re: Rims

Postby FORGE1 » Wed Mar 02, 2011 9:13 am

Mattman wrote:What sort of 32's do you have? I am about to fit an OME lift kit and 33in Maxxis Bighorns which measure at 32in.

Am hoping for minimal rubbage....



Im running Nankang Mudstars they are a smaller sized 32inch tyre I only get rubbing at full lock and reversing. There is a guy in town that has a maxitrac lift in his with Bridgestone Dueller M/T and they are 33x12.5x15 with small rubbage as well and they are a bigger 33inch size tyre so you should be all good.
Don't Bend the Rules, Rule the Bends!!!

Return to “Isuzu”

Who is online

Users browsing this forum: No registered users and 8 guests