Hi All,
I have a 1997 Isuzu Mu 3.1L TD Manual, I have started to notice that it is hard to get it into first or reverse, it does not do this all the time some days it is easy to get into gear with out a problem.
Has anyone had this issue? also how can you tell when the gear box is on it's way out.
If someone can shed light on the subject would be great.
Thanks
Ruben
Trouble Changing Gear
Trouble Changing Gear
1997 Isuzu Mu, 3.1TD, 5sp Manual.
Re: Trouble Changing Gear
Hows the clutch, could be slipping?
just to clarifyyou are stopping the truck from going forward before you select reverse?
joking!! Isuzu gearboxes typically are pretty strong, how ever they run a very light 10w30 engine oil.
When bearings wear out they will damage the internals and tend to require most of the bits to replaced (mainshfts etc)
This was the advice i got from geartech when i looked at re-bearing my gearbox.
just to clarifyyou are stopping the truck from going forward before you select reverse?
joking!! Isuzu gearboxes typically are pretty strong, how ever they run a very light 10w30 engine oil.
When bearings wear out they will damage the internals and tend to require most of the bits to replaced (mainshfts etc)
This was the advice i got from geartech when i looked at re-bearing my gearbox.
Last edited by GotFlex on Mon Apr 18, 2011 10:00 pm, edited 1 time in total.
SASed Isuzu Mu - hilux diffs, Rears up front, disc brake conversion, ifs hub swap, crossover steering, and legal!!!!
Re: Trouble Changing Gear
Is it hard to go into gear when it is cold but easy when it is warm? Cheers
1986 2.5L TD Pajero
Re: Trouble Changing Gear
Well the clutch is not that old and should be still good, I will have to look at the paper work to see when I got it done.
1997 Isuzu Mu, 3.1TD, 5sp Manual.
Re: Trouble Changing Gear
pouw wrote:Is it hard to go into gear when it is cold but easy when it is warm? Cheers
Yeah as today it was quite cold and it was hard to put in gear but when it warmed up it was getting easier.
Cheers.
1997 Isuzu Mu, 3.1TD, 5sp Manual.
Re: Trouble Changing Gear
Try changing the oil, its probably full of water and crap and not workin as it should
Toy - Zuk chassis tub, hilux 4.88 axles and transfer, Nissan CA18DE motor and auto trans, sc12 supercharger, 32 10'5 simex, twin motor 8274 custom freespool. Well the parts are all there in various corners of the shed
Re: Trouble Changing Gear
meatc wrote:Try changing the oil, its probably full of water and crap and not workin as it should
Yeah I will do that and see what happens, also when changing down from fifth to fourth it didn't want to go in ( did not force it ) and made a horrible noise just for a few seconds and back it off, maybe I was still going to high for the gear change.
1997 Isuzu Mu, 3.1TD, 5sp Manual.
Re: Trouble Changing Gear
GotFlex wrote:Hows the clutch, could be slipping?
just to clarifyyou are stopping the truck from going forward before you select reverse?
joking!! Isuzu gearboxes typically are pretty strong, how ever they run a very light 10w30 engine oil.
When bearings wear out they will damage the internals and tend to require most of the bits to replaced (mainshfts etc)
This was the advice i got from geartech when i looked at re-bearing my gearbox.
Thanks GotFlex, Yep Iam deffinitley coming to a complete stop before a put it in reverse , I will have to do some research on this.
1997 Isuzu Mu, 3.1TD, 5sp Manual.
Re: Trouble Changing Gear
yeah give geartech a buzz, they seem to know there stuff
SASed Isuzu Mu - hilux diffs, Rears up front, disc brake conversion, ifs hub swap, crossover steering, and legal!!!!
- mud_slinger
- Hard Yaka
- Posts: 1050
- Joined: Sun Oct 08, 2006 12:00 pm
- Location: christchuch
Re: Trouble Changing Gear
if your running a heavy oil it can be hard to shift when it is cold mine is until it warms up. i'm in the process of putting 15w40 in my boxes.
needs more curry
0272593533
0272593533
Re: Trouble Changing Gear
Mine used to do the same thing but for 1st, 2nd and reverse. I ended up replacing the gearbox becasue it also had a bad whine.
I also run Auto trans fluid in mine and its all good no problems and no noises.
I also run Auto trans fluid in mine and its all good no problems and no noises.
Don't Bend the Rules, Rule the Bends!!!
Re: Trouble Changing Gear
FORGE1 wrote:Mine used to do the same thing but for 1st, 2nd and reverse. I ended up replacing the gearbox becasue it also had a bad whine.
I also run Auto trans fluid in mine and its all good no problems and no noises.
Yeah mine is the same as yours 1st, 2nd and reverse but no whine tho.
Will have to see what I will do.
Cheers
1997 Isuzu Mu, 3.1TD, 5sp Manual.
Re: Trouble Changing Gear
Mine gets hard to change when the oil gets low.I destroyed the front bearing and the input shaft got so hot the whole gearbox locked up.I replaced the front bearing and seal ($100)and its still going strong (but very noisy) its got no hard serfaceing left on the gear on the input shaft and its been 10 months.so I would try changing the oil first I just use the same oil I do in my engine.
- dirtysouth4x4
- Newbie
- Posts: 1
- Joined: Fri Mar 02, 2012 2:36 pm
Re: Trouble Changing Gear
i have the same problem with my mu , do you suggest geting an oil change ? is there water and shit in there?
Who is online
Users browsing this forum: No registered users and 9 guests