95 bighorn lift

Nathunt
Winch master
Posts: 9
Joined: Tue Jul 30, 2013 7:06 pm

95 bighorn lift

Postby Nathunt » Tue Sep 10, 2013 5:09 pm

Hey curious on how much of a lift you need to get 33s to fit, 2inch suspension and 2inch body?
Cheers Nat

User avatar
Suza
Hard Yaka
Posts: 476
Joined: Thu Jan 31, 2008 11:03 am
Location: Some where around the Lakes or on the Hill

Re: 95 bighorn lift

Postby Suza » Tue Sep 10, 2013 8:12 pm

2" suspension lift was all mine took, but if I had to do it again I would properly go with a body lift instead as once my front was lifted I started to break things due to angles :(

User avatar
FORGE1
Hard Yaka
Posts: 630
Joined: Fri Feb 27, 2009 6:44 am
Location: Whangarei

Re: 95 bighorn lift

Postby FORGE1 » Tue Sep 10, 2013 8:29 pm

3inch rear and 2.5inch front suspension and 2inch body lift for mine, that was a wide body bighorn so the factory flares kept catching on the front so put normal guards off a non wide body with no flares and it was sweet.

Never broke a cv and mine got driven hard.
Don't Bend the Rules, Rule the Bends!!!

User avatar
Mattman
Hard Yaka
Posts: 1643
Joined: Sun Mar 05, 2006 12:00 pm
Location: Kapiti

Re: 95 bighorn lift

Postby Mattman » Wed Sep 11, 2013 7:08 pm

I am running 33in Maxis Bighorns which only measure about 32.

2in suspension lift only and no issues on a non widebody.

If you can do it its worth doing a ball joint flip and diff drop and low profile bump stop and remove the sway bar.

BCGC
Driver/Navigator
Posts: 31
Joined: Thu Jun 14, 2012 10:20 am

Re: 95 bighorn lift

Postby BCGC » Wed Sep 11, 2013 10:51 pm

I have 33sish and they barely scrub. Haven't done a lift, yet. Finally got my 16x10s on, no worries.

Return to “Isuzu”

Who is online

Users browsing this forum: No registered users and 6 guests