Offroad-Express

XJCrawler wrote:

yeti wrote:So cause I'm really gentle doing shit I now have to pull locker so I can replace the inner seals I damaged putting axles in ....

Did you just do that on sat?

One before but hey who's counting ...

sorted again ....put some rope on the pulley thing and ready for next weekend ......

great weekend at cust with the winch challenge....ironman class was a great success..think there was 25 trucks all up 12 being in the ironman class.......


got through 7 stages boiling again so parked her up think we may have a gasket problem or cracked head...




shit happens ......................................

well fark it she's gonna have to go out the back now.......

also found out temp gage doesn't work properly apparently......

I have heard that jeeps are like their owners and like it in the rear

rokhound wrote:I have heard that jeeps are like their owners and like it in the rear

fark you .....

rokhound wrote:I have heard that jeeps are like their owners and like it in the rear

(please none of you point out that mine is also in the rear)

Dont you worry about having something under pressure being shaken in the back that might suddenly spray hot liquid over your back?

Or is it just a jeep thing?

Heath wrote:Dont you worry about having something under pressure being shaken in the back that might suddenly spray hot liquid over your back?

Or is it just a jeep thing?

you sick bustards..................

Checkerhead wrote:

rokhound wrote:I have heard that jeeps are like their owners and like it in the rear

(please none of you point out that mine is also in the rear)

yeti wrote:

Heath wrote:Dont you worry about having something under pressure being shaken in the back that might suddenly spray hot liquid over your back?

Or is it just a jeep thing?

you sick bustards..................

Found barbie's older cousin

yeti wrote:great weekend at cust with the winch challenge....ironman class was a great success..think there was 25 trucks all up 12 being in the ironman class.......

got through 7 stages boiling again so parked her up think we may have a gasket problem or cracked head...




shit happens ......................................

Its about now we mention lasting 29 seconds then wayne???

Great Day out, Good enough to convince me to get another toy dammit

(your co-driver for me next time though)

kaney wrote:

yeti wrote:great weekend at cust with the winch challenge....ironman class was a great success..think there was 25 trucks all up 12 being in the ironman class.......

got through 7 stages boiling again so parked her up think we may have a gasket problem or cracked head...




shit happens ......................................

Its about now we mention lasting 29 seconds then wayne???

Great Day out, Good enough to convince me to get another toy dammit

(your co-driver for me next time though)

um 26 bro ....

yep ill navi for ya cause I know what ya brought .....

ya got it yet

Not yet. I need to find someone to go pick it up for me. I have no time at the moment

Have you done anything to your tie rod and drag link? Mine got bent over the weekend and I'm doing research to find a stronger replacement than factory. But other than the Crown Automotive HD Kit for RHD, there doesn't seem to be much.

Currie/Savvy kits are for LHD only. Can't be flipped, the cross over joint will hit the passenger side sway bar link/bracket.

bent mine a few times bout as thick as straw......waiting on James and see how his xj front end comes out ...doing some wj bits .....its all in his build thread ...xjcrawler ......just wish he would hurry up .....

Well, in that case I might just go with Crown HD kit this time and see how it goes with James for next time I bend it.

May be I should just raid my wife's WG for parts plus V8 and get her something else to drive....

she shrank .......put old lift back in .....have got bits on order as in flares and bits ...........should be a road going heep in a couple of weeks .....

what have you done with the coils you've removed? Im after a set about that size to trial/buy.

[attachment=0]image.jpg[/attachment

Ok wof sheet is a long sheet ... But nothing major .. Go figure ...more new bits .. Old lift sitting on shelf will go back in at some stage .... Maybe

tie rod ends done ...new windscreen in muffler to do , headlights ,ball joints fun things them ...

looking rather small nexts to kaneys rig......still will be able to run 35s when done ......low and slow...

seems legit ...............

For sale?
http://www.trademe.co.nz/motors/used-cars/jeep/auction-878733936.htm

Heard he is getting a Landcruiser.

going beach hopping.......wash ya mouth out Aron.....

[]so anyone got a soldering iron I could borrow ............







f

Wow

Just wrap some insulation tape around, she'll be right...