iron rock offroad products dealer ( for jeeps)

User avatar
4x4part
Bush Crasher
Posts: 83
Joined: Thu May 24, 2012 6:55 pm
Location: hot water beach

Re: iron rock offroad products dealer ( for jeeps)

Postby 4x4part » Mon Jun 23, 2014 6:00 pm

no i havent yet

XJCrawler
Hard Yaka
Posts: 209
Joined: Mon Mar 12, 2012 1:47 pm

Re: iron rock offroad products dealer ( for jeeps)

Postby XJCrawler » Mon Jun 23, 2014 10:05 pm

Here's what the plan is for mine: wj hub carrier conversion to get the draglink higher, probably end up having to make a straight track bar cut, threaded and adjustable joints added. Then the track bar mount on the diff redone or extended to match the height of the draglink. This will provide a more level higher steering setup and hopefully completely eliminate any chances of bump steer. Draglink will also need to be cut and rethreaded to eliminate the bend, it should work out pretty good with the height of the steering knuckle on the wj hub carrier.

User avatar
4x4part
Bush Crasher
Posts: 83
Joined: Thu May 24, 2012 6:55 pm
Location: hot water beach

Re: iron rock offroad products dealer ( for jeeps)

Postby 4x4part » Tue Jun 24, 2014 4:11 pm

where are you getting the cert ?

XJCrawler
Hard Yaka
Posts: 209
Joined: Mon Mar 12, 2012 1:47 pm

Re: iron rock offroad products dealer ( for jeeps)

Postby XJCrawler » Tue Jun 24, 2014 9:49 pm

I'll end up taking it through Don

Xjmad94
Newbie
Newbie
Posts: 1
Joined: Fri Oct 31, 2014 7:52 am

Re: iron rock offroad products dealer ( for jeeps)

Postby Xjmad94 » Fri Oct 31, 2014 7:56 am

Hey mate I need your contact details, have a lot of parts I need to buy

User avatar
mudlva
Hard Yaka
Posts: 2918
Joined: Mon Apr 16, 2007 12:00 pm
Location: fixing another cv!! dam lockers (Papakura)

Re: iron rock offroad products dealer ( for jeeps)

Postby mudlva » Sun Nov 02, 2014 7:07 am

4x4part wrote:where are you getting the cert

i see you decided to not support this site by becoming a vendor. pity about that :( :?

Return to “Jeep”

Who is online

Users browsing this forum: No registered users and 13 guests