2000 grand 4.7 radiator removel

User avatar
yeti
Bruiser
Posts: 1847
Joined: Thu Oct 11, 2007 12:00 pm
Location: kainga

2000 grand 4.7 radiator removel

Postby yeti » Sun Nov 03, 2013 9:57 am

anyone removed theres...seems like a lot of shit to move just to pull rad....had a look at some stuff on goolge some write ups say bumper off some dont ..seems on the 2000 ya gotta remove bummper to remove grill.... :?: :?:
cheers
v8 tj...luvs the gas......

WESTY33
Winch master
Posts: 11
Joined: Tue Oct 29, 2013 8:12 pm

Re: 2000 grand 4.7 radiator removel

Postby WESTY33 » Sun Nov 03, 2013 12:36 pm

hey mate could you post a close up picture I have done a fair few of these and don't think that bumper does need to come off just not to sure of top of my head from memory the front grill comes out and just top support and can take it out very easy from there

WESTY33
Winch master
Posts: 11
Joined: Tue Oct 29, 2013 8:12 pm

Re: 2000 grand 4.7 radiator removel

Postby WESTY33 » Sun Nov 03, 2013 12:44 pm

I have a wg sitting at work with no engine in it will have a quick look first thing in the morning and post the fastest way to do it for you

User avatar
yeti
Bruiser
Posts: 1847
Joined: Thu Oct 11, 2007 12:00 pm
Location: kainga

Re: 2000 grand 4.7 radiator removel

Postby yeti » Sun Nov 03, 2013 3:39 pm

WESTY33 wrote:hey mate could you post a close up picture I have done a fair few of these and don't think that bumper does need to come off just not to sure of top of my head from memory the front grill comes out and just top support and can take it out very easy from there



right you are mate.....see not everything on the net is true... :shock: .....seems the auxiliary fan has parted ways and molested the radiator and had its way with the shroud... :? ...cheers westy ...you seen this happen before :?:

Image
Image
v8 tj...luvs the gas......

User avatar
TJ
Hard Yaka
Posts: 2060
Joined: Thu Oct 12, 2006 12:00 pm
Location: in a Jeep

Re: 2000 grand 4.7 radiator removel

Postby TJ » Sun Nov 03, 2013 5:51 pm

My WJ/WG has hydraulic fan driven by the power steering pump. Its mounted to the radiator and shroud.
'12 JK Rubicon V6 3.6L Auto D44/D44

User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north
Contact:

Re: 2000 grand 4.7 radiator removel

Postby safaripete » Sun Nov 03, 2013 10:29 pm

TJ wrote:My WJ/WG has hydraulic fan driven by the power steering pump. Its mounted to the radiator and shroud.



yeah mine is the same. maybe they changed from 01 on?

User avatar
yeti
Bruiser
Posts: 1847
Joined: Thu Oct 11, 2007 12:00 pm
Location: kainga

Re: 2000 grand 4.7 radiator removel

Postby yeti » Mon Nov 04, 2013 2:40 pm

anyone seen this happen before ,,,,only clue was when ac turned on was a slight vibration coming from up that ways then snap bang pop ...fark...last noise was me ......... :roll:
v8 tj...luvs the gas......

User avatar
mr terrano
Bush Crasher
Posts: 65
Joined: Fri Apr 05, 2013 5:03 pm

Re: 2000 grand 4.7 radiator removel

Postby mr terrano » Tue Nov 05, 2013 7:36 pm

Bumper has to come off umm the viscous fan u need to put a chain around and think is like a 24mm spanner to take it off remove shround and can get easy access to it I have just rebuilt a kj Cherokee 2002 so very similar design except front grille comes straight out on them to get radiator access this is WESTY33 just on my mates account atm the front bumper on them are very easy to remove if you have any questions let me no have worked at a jeep dealer for previous two years

User avatar
yeti
Bruiser
Posts: 1847
Joined: Thu Oct 11, 2007 12:00 pm
Location: kainga

Re: 2000 grand 4.7 radiator removel

Postby yeti » Tue Nov 05, 2013 7:45 pm

mr terrano wrote:Bumper has to come off umm the viscous fan u need to put a chain around and think is like a 24mm spanner to take it off remove shround and can get easy access to it I have just rebuilt a kj Cherokee 2002 so very similar design except front grille comes straight out on them to get radiator access this is WESTY33 just on my mates account atm the front bumper on them are very easy to remove if you have any questions let me no have worked at a jeep dealer for previous two years

tis out mate ,, took bout 40 minutes....that's the remains in second pic.....bumper still on .....just gotta price up new radiator, shroud ,fan blan blah.....
cheers mate :wink:
v8 tj...luvs the gas......

User avatar
yeti
Bruiser
Posts: 1847
Joined: Thu Oct 11, 2007 12:00 pm
Location: kainga

Re: 2000 grand 4.7 radiator removel

Postby yeti » Thu Nov 07, 2013 4:04 pm

so seems the experts say I was unlucky and picked up a stone or whatever .....

Image


will throw it in the hole on weekend ..plastic weld me shroud up and throw a new fan on .....

jeeps huh....... :roll:
v8 tj...luvs the gas......

Return to “Jeep”

Who is online

Users browsing this forum: No registered users and 12 guests