As title ses can anyone recommend an alloy tig welder in christchurch? need a small bit of intercooler outlet welded back on as I Trimed it a bit much.
Cheers
Can anyone recommend a good alloy tig welder? (Canterbury)
Can anyone recommend a good alloy tig welder? (Canterbury)
GU patrol 35s ect.
Money and time pit Suzuki Build.
Money and time pit Suzuki Build.
Re: Can anyone recommend a good alloy tig welder? (Canterbur
Priest sheetmetal and plate. Talk to Sam. They are at 10 barbour street 366-9818
Re: Can anyone recommend a good alloy tig welder? (Canterbur
what area of chch are you close too? home or/and work?
- mud_slinger
- Hard Yaka
- Posts: 1050
- Joined: Sun Oct 08, 2006 12:00 pm
- Location: christchuch
Re: Can anyone recommend a good alloy tig welder? (Canterbur
go and see mike at A1 radiators he is good he makes intercoolers for a living. tell him hamish sent ya
needs more curry
0272593533
0272593533
Re: Can anyone recommend a good alloy tig welder? (Canterbur
pressy wrote:what area of chch are you close too? home or/and work?
Live Hoon Hay, work rolleston.
Cheers for the replies
GU patrol 35s ect.
Money and time pit Suzuki Build.
Money and time pit Suzuki Build.
Re: Can anyone recommend a good alloy tig welder? (Canterbur
I have a guy in Chattertons rd who can sort you. Look up Jet Stream services in the ph book and ask for Miles. Tell him Westie sent ya
Ugly is a state of mind..... and the state of my truck!
Re: Can anyone recommend a good alloy tig welder? (Canterbur
royce clive engineering, www.roycecliveengineering.co.nz/
Unit 4/7 Nga Mahi Rd, Sockburn
off Blenheim road, turn at blacks fastners on the left heading towards hornby
Unit 4/7 Nga Mahi Rd, Sockburn
off Blenheim road, turn at blacks fastners on the left heading towards hornby
- jonossiksilvia
- Hard Yaka
- Posts: 727
- Joined: Mon Jul 12, 2010 5:53 pm
- Location: christchurch
Re: Can anyone recommend a good alloy tig welder? (Canterbur
Austons alloy welding has done work for me. Cheapest when I was looking and bloodly tidy. Id never think twice going back to him. He done my stuff for 75 instead of others charging at least 170.. He on gasson st next to chase exhausts and opersite bumper shop.
Current 4wd: Surf Kzn185 ssrg factory Intercooled (yet to start build)
Past 4wd: toyota surf ln130, coil sas, 1uz v8 build
Past 4wd: toyota surf ln130, coil sas, 1uz v8 build
Re: Can anyone recommend a good alloy tig welder? (Canterbur
go to austins m8,really good welder ,cheap, does alot of tricky stuff.
- IcedJohnno
- Trailer Trash
- Posts: 821
- Joined: Tue Oct 11, 2005 12:00 pm
- Location: Christchurch nr the hills
Re: Can anyone recommend a good alloy tig welder? (Canterbur
I highly recommend P.A.D. Racing, 37a Hands Rd off Birmingham drive.
Garry is an ex Air NZ aircraft engineer who has welded all sorts of tricky stuff for me over the last 15 years. his welding experience ranges from British touring car nissan cyl. head fabrication through to Trials buggy chassis, to Formula 5000 monocoques.
He is also one of the best dyno tuners in town as well. Champion success in all forms of competitive NZ motorsport.
Contact Garry on 338 6288
Garry is an ex Air NZ aircraft engineer who has welded all sorts of tricky stuff for me over the last 15 years. his welding experience ranges from British touring car nissan cyl. head fabrication through to Trials buggy chassis, to Formula 5000 monocoques.
He is also one of the best dyno tuners in town as well. Champion success in all forms of competitive NZ motorsport.
Contact Garry on 338 6288
Who is online
Users browsing this forum: No registered users and 9 guests