IFS Hub Spacer Kit

Moderator: Vendors

User avatar
Jafa
Hard Yaka
Posts: 1307
Joined: Mon Nov 01, 2004 12:00 pm
Location: Katikati

IFS Hub Spacer Kit

Postby Jafa » Thu Apr 02, 2009 11:00 am

This spacer allows you to run IFS wheel hubs on a solid axle front end. IFS wheel hubs wheel mounting face is offset further to allow the front ends of these trucks to match up to the rear, which is 58 inch's wide.

A pair of these CNC machined spacers is needed to adapt either your current solid axle rotors and calipers, or the upgraded IFS calipers and FJ-60 series vented rotors.

We supply all needed hardware to bolt this spacer to the rotor. Dowel pins are no longer used as the adapter has a pair of dowels machined into it, to use factory holes in the disc. The kit includes 6 bolts to mount disc, and is yellow zinc plated for corrosion protection.

$485 inc gst Purchase from our website http://www.snr4x4.co.nz

Image

Image
'85 Hilux crawler, 3rz, duals, 4.7's, 4.88's, ARB's, 30 spline Longfields, 6 stud SNR4x4 Histeer, Airshocks up front, coiled rear, 40" Iroks.
^^^this shite is all about to change....^^^

021 273 9942
jafa@inspire.net.nz

User avatar
J_Dub
Hard Yaka
Posts: 1673
Joined: Fri Oct 24, 2008 10:02 am
Location: Pukekohe

Re: IFS Hub Spacer Kit

Postby J_Dub » Thu Apr 02, 2009 12:24 pm

nice, looked through ya site, are you looking to or do you make/sell low profile gearbox mount for hilux

User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: IFS Hub Spacer Kit

Postby haynzy » Thu Apr 02, 2009 5:35 pm

J_Dub wrote:nice, looked through ya site, are you looking to or do you make/sell low profile gearbox mount for hilux

I already told him he needs to make them :mrgreen:
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.

User avatar
andrew007
Hard Yaka
Posts: 250
Joined: Sun Sep 17, 2006 12:00 pm
Location: christchurch

Re: IFS Hub Spacer Kit

Postby andrew007 » Thu Apr 02, 2009 5:46 pm

i would be keen on one if your going to make them!

User avatar
J_Dub
Hard Yaka
Posts: 1673
Joined: Fri Oct 24, 2008 10:02 am
Location: Pukekohe

Re: IFS Hub Spacer Kit

Postby J_Dub » Thu Apr 02, 2009 6:11 pm

andrew007 wrote:i would be keen on one if your going to make them!


well thats 2 orders :D

User avatar
Jafa
Hard Yaka
Posts: 1307
Joined: Mon Nov 01, 2004 12:00 pm
Location: Katikati

Re: IFS Hub Spacer Kit

Postby Jafa » Thu Apr 02, 2009 6:28 pm

ok ok ok I get teh message :lol: :lol:
Whats everyones chassis and engine/gbox combo that wants one
'85 Hilux crawler, 3rz, duals, 4.7's, 4.88's, ARB's, 30 spline Longfields, 6 stud SNR4x4 Histeer, Airshocks up front, coiled rear, 40" Iroks.
^^^this shite is all about to change....^^^

021 273 9942
jafa@inspire.net.nz

User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: IFS Hub Spacer Kit

Postby haynzy » Thu Apr 02, 2009 6:34 pm

Jafa wrote:ok ok ok I get teh message :lol: :lol:
Whats everyones chassis and engine/gbox combo that wants one

do a measure on mine should suit all with 60series and standard gearbox ill test it out and you can give it to me for free :mrgreen: :mrgreen:
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.

User avatar
J_Dub
Hard Yaka
Posts: 1673
Joined: Fri Oct 24, 2008 10:02 am
Location: Pukekohe

Re: IFS Hub Spacer Kit

Postby J_Dub » Thu Apr 02, 2009 7:20 pm

mines all standard yn60 5 spd manual, do you want g/b model? how muchy we looking at???????? :D

User avatar
hosehustler
Hard Yaka
Posts: 2051
Joined: Thu Jan 06, 2005 12:00 pm
Location: Brooklnands

Re: IFS Hub Spacer Kit

Postby hosehustler » Thu Apr 02, 2009 7:49 pm

Isn't this an IFS hub spacer thread :?: :?:
The SNR kit is awesome.....BUY IT :!:

How about a low profile Xmember for the A340 trans Trev.......... :mrgreen:
I hate signatures

User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland
Contact:

Re: IFS Hub Spacer Kit

Postby muddyhilux » Fri Jun 03, 2011 4:01 pm

can anyone confirm the fj 60 vented disc part number for appco or the likes,doing this now on brother n laws but his parts guys reckons he cant find the discs?cheers for any help
1990 surf 350 chevy jacked up and currently under construction again

Return to “Axles Tyres and Wheels”

Who is online

Users browsing this forum: No registered users and 8 guests